User guide

196
Section 13
1. In standby mode, press the MENU (left) soft key ( ),
then press (for Setup), (for Call Options), and
for Auto Retry. The following options appear in the
display:
䢇 Off
䢇 Every 10 sec
䢇 Every 30 sec
䢇 Every 60 sec
2. Use the navigation keys to highlight the desired setting,
then press .
Data
Use the Data sub menu to set your phone to detect data
connections automatically and to set the speed at which
data is transmitted (baud rate).
1. In standby mode, press the left soft key ( ), then press
(for Setup), (for Call Options), and for
Data
. The following options appear in the display:
䢇 Auto Detect — Set data auto detect capabilities. Options are:
Data off, Data for next call, and Data until powered off.
䢇 Baud Rate — Set the baud rate for data connections. Options
are: Auto, 19200, 38400, 57600, 115200, and 230400.
2. Use the navigation keys to highlight Auto Detect or
Baud Rate, then press . The selected sub menu
options appear in the display.
3. Use the navigation keys to highlight the desired Auto
Detect or Baud Rate setting, then press .
9
wxyz
6
mno
1
@
)
)
OK
9
wxyz
6
mno
2
abc
OK
OK