User manual
39
ENGLISH
Installing the wind bae
If you operate the cooling operation of air conditioner in the condition where ambient temperature is lower than -5 °C
DB(Dry bulb), or the outdoor unit might be faced with strong wind directly, the wind bae should be installed to prevent the
outdoor unit fan from operating in reverse way.
Make holes on both sides and attach the
wind bae using screws.
625.7 mm
16.0 mm
Partition
<Front View>
"A"
<Top Down View>
“A” – Should be 200 mm or longer
t When attaching the wind bae using screws, be careful that the screws do not damage the partition.
CAUTION
t Install outdoor units with the back surface facing wall side to eliminate the eects of external wind.
NOTE