Owner's manual

98 Section 2H. Using the microSD Card
Installing the microSD Memory Card
1. Locate the memory slot on the right side of the
device and flip up the microSD plastic cover.
2. Make sure the microSD card's gold contacts are
facing up.
3. Carefully insert the microSD card into the opening
and firmly push it in until you hear a click that
indicates the card is securely installed.
4. With the card now securely installed, replace the
plastic cover over the microSD slot on the device.
Removing the microSD Memory Card
1. Flip up the microSD plastic cover on the right side
of the device.
2. Firmly push the end of the card further into the
device and release—the card should pop out from
the memory card slot. If this does not work, repeat
this process.
microSD card
microSD slot
plastic cover
Note
Be sure to use only recommended microSD cards
(32MB–2 GB). Using non-recommended microSD
cards could cause data loss and damage your device.
I325.book Page 98 Tuesday, December 11, 2007 11:23 AM