Owner's manual

126 Section 2J. Bluetooth
5.
Press Done (left softkey) to return to the Bluetooth
Devices list.
To configure the settings of Bluetooth devices in your list:
1. Press the Power button, select Wireless Manager and
press .
2. Highlight the Bluetooth field and press Menu (right
softkey)
> Bluetooth Settings.
3. Highlight a device and press Menu (right softkey) >
Edit.
4. Use the keypad and to change the device
name and press
Next (left softkey).
5. Highlight an option and then press to check or
uncheck the box for the option.
6. Press Done (left softkey).
To delete a Bluetooth device from your list:
1. Press the Power button, select Wireless Manager and
press .
2. Highlight the Bluetooth field and press Menu (right
softkey)
> Bluetooth Settings.
3. Highlight a device and press Menu (right softkey) >
Delete.
4. From the Confirm screen, press Yes (left softkey) to
delete the device or press
No (right softkey) to
cancel.
Beaming Files
Using an active Bluetooth connection, you can beam
any data file (Contacts, pictures, video, text, etc.) directly
to another Bluetooth device. Both devices must be
active ( ), with visibility turned on, and the recipient
must accept the incoming data.
When you send data to another user, it is up to the
recipient to either accept the incoming data or reject
the connection. If you are sending a picture to a
Bluetooth-compatible printer, you may need the
passcode to establish a connection.
I325.book Page 126 Tuesday, December 11, 2007 11:23 AM