Owner's manual

Settings
Section 2B. Your Device’s Settings 47
2. Choose Any time (default) or Custom time. If you wish
to set a custom time, enter new start and end times
using the 24-hour time format (0000 - 2400), and
press
Done (left softkey). The backlight will be
enabled only during the start and end time that
you have set.
Location Settings
Your device is equipped with a Location feature for use
in connection with location-based services.
The Location feature allows the network to detect your
position. Turning Location off will hide your location
from everyone except 911.
To enable your device’s Location feature:
1. From standby mode, press Start > Settings > More...
> More... > Other Settings > Location.
(The Location
disclaimer will be displayed.)
2. Read the disclaimer and press OK (left softkey).
3. Select Location on or 911 calls only and press Done
(left softkey).
When the Location feature is on, your device’s standby
screen will display the icon. When Location is set to
911 calls only, the icon will be displayed. In this
instance, the location feature is only enabled while in a
911 call so that emergency personnel can locate you
during an emergency.
Call Options
You can customize settings related to call functions.
Although your current phone number is displayed, it
cannot be changed in this menu. Call options allow
you to change the following settings:
䢇 Any key answer to set up how you answer incoming
calls.
Note
Turning Location on will allow the network to detect
your position using GPS technology, making some
Sprint applications and services easier to use. Turning
Location off will disable the GPS location function for
all purposes except 911, but will not hide your general
location based on the cell site serving your call. No
application or service may use your location without
your request or permission. GPS-enhanced 911 is not
available in all areas.
I325.book Page 47 Tuesday, December 11, 2007 11:23 AM