Operating instructions

24_ Operating advanced function
Operating advanced function
SETTING THE 7-DAY(WEEKLY) SCHEDULE
Set the schedules for ON/OFF timer to be repeated each week.
Maximum 7 schedules may be set for each day.
• Whenusingroomthermostat,itisimpossibletoreserve.
• Ifweeklyschedulereserved7itemsisonthesameday,itisimpossibletoreserve.
In that case, When pressing the Weekly button, change the View mode of reservation.
• Settingtheweeklyscheduleisfor“Cool&Heat”Modeonly.
• Itisimpossibletoreserveseveraltimesforthesamedayandsametime.
• Weeklyschedulecannotbeusedwiththeroomthermostat.
1. Press the Weekly button.
 The mode changes to the weekly schedule.
 In this mode, you can only use Up, Down, Weekly,
Set, Cancel/Delete button.
 To cancel the setting, press the Cancel/Delete button.
2. Set the day by pressing Up or Down button.
 The On/Off indicator will blink. Set the On/Off status and
press Set button to save the setting.
3. Set the On/Off by pressing Up or Down button.
 The ‘On/Off’ indicator will blink. Set the On/Off status
and press Set button to save the setting.
4. Set the operation mode by pressing Up or Down
button.
 The ‘operation indicator’ will blink. Set the day and press
Set button to save the setting.
•Tosetthe“Off”reservation,movetothestep6.
•ItisimpossibletosettheAuto( ) mode.
5. Set the temperature by pressing the Up or Down
button.
 The ‘temperature’ will blink. Set the temperature and
press Set button to save the setting.
The setting temperature is decided according to Dip S/W #2 of remote controller.
-DipS/W#2On:Settingthetemperatureofindoor.
-DipS/W#2Off:Settingthetemperatureofwateroutlet.
Continue to the next page