User manual

44
Connecting drain hose
1. Slightly hit the hole, for drain hose, with your hands or hammer.
2. Insulate the drain hose with drain insulation tube and fix it with tape.
3. Direct the drain hose downward to establish natural draining.
- Make sure to check for proper drainage after connection
• Fix the drain hose tightly to prevent any water leakage.
• Do not use the extended drain hose.
- Since water may leak from the connection part, make sure that you do not extend the drain hose. However, if
extension is unavoidable due to its short length, use silicone sealant to securely seal the connection to prevent
leakage. (Do not use the insulation tape.)
CAUTION
Duct drainage
[Polypropylene(PP)]
Drain hose
Insulation (foamed
polyethylene)
Connection
drain hose
• Connect the drain hose through the upper hole
for drain hose.
Upper hole for a drain hose
Piping
Drain hose
410 mm
Hole for piping connection
• Connection with wire-concealed piping
Upper hole for
a drain hose
Piping
Hole for piping connection
Drain hose
Incorrect installation
(U-TRAP)
• Make sure the U-TRAP does not occur. Water may overflow and cause property damage.
CAUTION
S-east_MEMORY_IBIM_EN_03955A-02_EN.indd 44 2014-10-28 오후 12:01:02