Mini Component System Instruction Manual
Table Of Contents
- Safety Warnings
- Contents
- INSTALLING YOUR MINI-COMPACT SYSTEM
- Front Panel View
- Remote Control
- Rear Panel View
- Where to Install Your Mini-Compact System
- Connecting your System to the Power Supply
- Inserting Remote Control Batteries
- Connecting the Loudspeakers
- Connecting to an External Source
- Connecting to the Equipment
- Connecting the AM (MW/LW) Aerial
- Connecting the FM Aerial
- Connecting the SW Aerial (OPTION)
- Demo/Dimmer function
- Multi Jog Function
- Setting the Clock
- VCD/MP3-CD/CD-PLAYER
- Loading and Changing Compact Discs
- To replay the CD/MP3
- Selecting a CD in the Disc changer
- MP3-CD PLAYBACK
- Selecting a Track
- Searching for a Specific Music Passage on a CD
- Function to skip through 10 tracks at a time
- Shuffle Play Function
- Repeating One or All Tracks on the Compact Discs
- Programming the Order of Playback
- Checking or Changing Programmed Tracks
- Video CD Player Playback
- Search Functions
- Time Search Function
- When adjusting play speed
- NTSC/PAL Selection Method
- Sound Selection Function
- KEY CONTROL Function
- VCD VIEW function
- ZOOM Function
- Last Memory Function
- TUNER
- TAPE DECK
- OTHER FUNCTIONS
- RECOMMENDATIONS FOR USE
GB
7
The loudspeaker and subwoofer connector terminals are
located on the rear of the system.
The subwoofer generates low-pitched tones.
(Ex. Explosion, the sound of spacecraft flying, the sound of pondering,
etc.)
Press and hold the clamp of the speaker terminal on the rear of the
unit.
Insert the end of the speaker cord into the terminal.
Match the polarity (colors): Red (+) to red (+) and black (–) to
black (–).
Match the polarity (colors): Blue (+) to blue (+) and black (–) to
black (–); Red (+) to red (+) and black (–) to black (–).
Release the finger from the clamp.
Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the unit.
Connecting the Loudspeakers
1
2
3
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation
of the speaker.
Do not install on the wall or on a high place of pole or other
unstable place to prevent any safety accident caused by falling
of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.
Insert or replace remote control batteries when you:
Purchase the mini-compact system
Find that the remote control is no longer operating correctly
When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.
Place your thumb on the position marked on the battery
compartment cover (rear of the remote control) and push the cover
in the direction of the arrow.
Insert two AA, LR6 or equivalent batteries, taking care to respect the
polarities:
+ on the battery against + in the battery compartment
– on the battery against – in the battery compartment
Replace the cover by sliding it back until it clicks into position.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Inserting Remote Control Batteries
1
2
3
Match the polarity (colors): Blue (+) to blue (+) and black (–) to
black (–); Red (+) to red (+) and black (–) to black (–).
Speaker Cord
(Red/Black)
Speaker Cord
(Blue/Black)