User Manual

E-16

Method of Installation

Installation of the Drain Tube

Fix the drain tube as shown in the figure.

Installation of the Drain Pan

The procedure for installing the drain pan should be determined by the

condition of the installing area.

◆

In the case of an area where the drain pan can not be directly

installed on the rear side of the unit after installing the air conditioner.

Example:

High storage

Remove two screws on the lower, right and left sides of the unit.

Open the front grille.

Remove the front panel.

2-1 Press both sides of the cabinet in the direction of the arrow

as shown in the figure.

2-2 Pull the lower part of the front panel slightly forward.

(below three inches)

2-3 Lift the front panel upward.

Applying excessive force to remove the front panel

may cause damage to the tab ; be sure not to use

excessive force.

☛

Rubber cap

Screws(2EA)

Gasket

Rear

Drain Tube

Front panel

Removal and Reassembly of the Front Grille

Grasp the lower part of the front grille and the air filter handle, then

open the grille.

(The open angle of front grille has not to be exceeded 90 degree)

Push the front grille on the left and remove it from the front panel.

Reassembling of front grille should be done in reverse order of

disassembly.