AK68-01477B BD-UP5000 User’s Manual Iecteur Duo HD Duo HD Player Manuel d’utilisation BD-UP5000 AK68-01477B
key features of your new Duo HD player Player Features Supports a Variety of Video Disc Types Supports BD, HD DVD, DVD Video, DVD-RW/-R (V mode and finalized only). HDMI (High Definition Multimedia Interface) HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV. Simplay HD Simplay HD guarantees that this player has been tested according to specifications aimed at maximizing the delivery of HD content.
Graphic planes Two individual, full HD resolution (1920x1080) video layers are available, on top of the HD video layer. One layer is assigned to video-related graphics (like subtitles), and the other layer is assigned to interactive elements, such as buttons or menus. Various wipes, fades and scroll effects may be available on both layers.
safety information WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within CAUTION: TO REDUCE THE RISK OF ELECTRIC Triangle Is a warning sign alerting you of SHOCK, DO NOT REMOVE COVER (OR BACK) NO dangerous voltage Inside the product USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/ IEC 13818-3 used or sold in combination with this product unit.
safety information Handling Cautions • Before connecting other components to this Duo HD player, be sure to turn them all off. • Do not move the Duo HD player while a disc is being played as the disc may be scratched or broken, or the Duo HD player internal parts may be damaged. • Do not put a flower vase filled with water or any small metal objects on the Duo HD player. • Be careful not to put your hand into the disc tray. • Do not place anything other than the disc in the disc tray.
contents What’s included 4 5 Warning Precautions GETTING STARTED 9 10 13 Before Reading the User’s Manual Disc Type and Characteristics Disc Storage & Management DESCRIPTION 14 14 15 Front Panel Front Panel Display Rear Panel REMOTE CONTROL 16 18 18 19 20 21 22 23 24 25 26 30 Tour of the Remote Control Setting the Remote Control Regarding the Battery Controllable TV Codes Connecting to a TV with an HDMI Cable HDMI Auto Detection Function Connecting to a TV with DVI Cable Connecting to a TV (Comp
contents 37 39 Setting up the Audio Options Setting up the Speaker Options DISPLAY SETUP 40 Setting up the Video display/output Options HDMI SETUP 43 Setting up the HDMI setup options PARENTAL SETUP 45 Setting up the Parental Lock NETWORK SETUP 47 48 48 49 49 49 TCP/IP Setting Proxy Setting Cookie Setting Network Throughput NTP Server Setting Mac Address PERSISTENT STORAGE MANAGEMENT 50 System Device Management SYSTEM UPGRADE 51 53 Firmware Upgrade System Information WATCHING A MOVIE 54
getting started BEFORE READING THE USER’S MANUAL Make sure to check the following terms before reading the user manual. Icons that will be used in manual Term Definition h BD-ROM This involves a function available on a BD-ROM. A Z C V B M HD DVD-ROM This involves a function available on a HD DVD-ROM. DVD-VIDEO This involves a function available on DVD-Video or DVD-R/DVD-RW discs that have been recorded and finalized in Video Mode. DVD-RW This involves a function available on DVD-RW.
getting started DISC TYPE AND CHARACTERISTICS Disc types that can be played Disc Types Disc Logo Recorded content BD-ROM AUDIO + VIDEO HD DVD-ROM AUDIO + VIDEO DVD-VIDEO AUDIO + VIDEO AUDIO AUDIO-CD Disc Shape Single sided(25GB, 5 inches) Double sided(50GB, 5 inches) Max.
Discs that cannot be played • • • • • Blu-ray Discs with a region code other than "Region A". BD-R, BD-RE DVD-Video with a region number other than “1” or “ALL” HD DVD-R DVD-RAM • • • • 3.9 GB DVD-R Disc for Authoring. DVD-RW(VR mode) DVD-ROM/PD/MV-Disc, etc CVD/CD-ROM/CD-RW/CDV/CD-G/CD-I/LD Region code Both the Duo HD player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play.
getting started HD DVD Disc Compatibility HD DVD is a new format, disc compatibility issues with new and existing format discs are possible. Not all discs are compatible. If you experience compatibility problems, please contact SAMSUNG Customer Service. M Playback may not work for some types of discs, or when specific operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to this if necessary.
❖ DVD-RW Disc Playback • Playback can be performed with DVD-RW discs in the Video Mode and finalized only. • Once a DVD-RW recorded in Video Mode is finalized, it becomes DVD-Video. Ability to play back may depend on recording conditions. Disc Format ❖ DVD-RW/-R (V) DISC STORAGE & MANAGEMENT Disc Handling • Use discs with regular shapes. If an irregular disc (a disc with a special shape) is used, this Duo HD player may be damaged.
description FRONT PANEL DISC TRAY Opens to accept a disc. OPEN/CLOSE BUTTON Opens and closes the disc tray. REMOTE CONTROL SENSOR Detects any signal from the remote control. PLAY/PAUSE BUTTON Plays a disc or pauses playback. STOP BUTTON Stops disc playback. SEARCH/SKIP BUTTONS Goes to the next title/chapter/track or goes back to the previous title/chapter/track. DISPLAY Displays the playing status, time, etc. STANDBY INDICATOR When the unit is first plugged in, this indicator lights.
REAR PANEL ● DESCRIPTION A 1 Fan The fan always revolves when the power is on. Ensure a minimum of 4 inches of clear space on all sides of the fan when installing the product. 7.1CH ANALOG AUDIO OUT Connect to a 7.1CH analog input on an A/V amplifier (When connecting to a 5.
16_ remote control Press to search a disc backwards or forwards. REVERSE/FORWARD SEARCH Buttons Press to skip backwards or forwards. REVERSE/FORWARD SKIP Buttons Each time this button is pressed, the disc will play slowly. SLOW Button CANCEL Button NUMBER Buttons POWER Button To open and close the disc tray. OPEN/CLOSE Buttons 1. Lift the cover at the back of the remote control upward as shown. 2. Install two AAA size batteries.
TV VOL Buttons Press this to switch the BD/HD DVD/DVD’s subtitle language. SUBTITLE Button RESUME PLAY Button You can resume playing from the last stopped point. Use this to access various audio functions on a disc (BD/HD DVD/DVD). AUDIO Button COLOR Buttons : RED(A), GREEN (B), YELLOW(C), BLUE(D) Use this to enter the disc menu. DISC MENU Button Displays current setting or disc status. INFO Button ENTER/DIRECTION Buttons Brings up the Duo HD player’s setup menu.
remote control SETTING THE REMOTE CONTROL You can control certain functions of your TV with this remote control. Control function buttons include : TV POWER, CH ,., VOL + –, TV MUTE, TV INPUT SEL., DIRECTION/ ENTER button. However, the DIRECTION/ENTER button can only operate when the TV INPUT SEL. button has been selected. To determine whether your television is compatible, follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3.
CONTROLLABLE TV CODES Brand SAMSUNG Code TV POWER+01, +02, +03, +04, +05, +06, +07, +08, +09 AIWA TV POWER+82 ANAM TV POWER+10, +11, +12, +13, +14, +15, +16, +17, +18 TV POWER+57 BLAUPUNKT TV POWER+71 BRANDT TV POWER+73 BRIONVEGA TV POWER+57 CGE TV POWER+52 CONTINENTAL EDISON TV POWER+75 DAEWOO TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34 EMERSON TV POWER+64 FERGUSON TV POWER+73 FINLUX TV POWER+06, +49, +57 FORMENTI TV POWER+57 FUJITSU TV POWER+84
connections This section involves various methods of connecting the Duo HD player to other external components such as a TV. CONNECTING TO A TV WITH AN HDMI CABLE 1. Using an HDMI-HDMI cable (not included) connect the HDMI OUT terminal on the rear of the Duo HD player to the HDMI IN terminal of your TV. 2. Press the input selector on your TV remote control until the HDMI signal from the Duo HD player appears on your TV screen.
HDMI AUTO DETECTION FUNCTION The player's video output will automatically change to HDMI output resolution when connecting an HDMI cable while power is on (see page 42). M Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user's manual of your TV. If an HDMI or HDMI-DVI cable is connected from the player to a TV, the Duo HD player’s output is set to HDMI/ If Component and HDMI are both connected, HDMI mode is automatically selected.
connections CONNECTING TO A TV WITH DVI CABLE 1. Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Duo HD player to the DVI IN terminal of your TV. 2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Duo HD player to the AUDIO (red and white) IN terminals of your TV. Turn on the Duo HD player and TV. 3. Press the input selector on your TV remote control until the DVI signal from the Duo HD player appears on your TV screen.
CONNECTING TO A TV (COMPONENT) - Connecting to your TV using Component video cables. 1. Using Component video cables (not included) , connect the COMPONENT VIDEO OUT terminals on the rear of the Duo HD player to the COMPONENT IN terminals of your TV. 2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Duo HD player to the AUDIO (red and white) IN terminals of your TV. Turn on the Duo HD player and TV. 3.
connections CONNECTING TO A TV (S-VIDEO) - Connecting to your TV using an S-Video cable. - You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio output.) 1. Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the Duo HD player to the S-VIDEO IN terminal of your TV. 2.
CONNECTING TO A TV(VIDEO) 2. Turn on the Duo HD player and TV. 3. Press the input selector on your TV remote control until the Video signal from the Duo HD player appears on the TV screen. • If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT SEL. button on the remote control and select VIDEO as the external source of the TV. Yellow M Red White Noise may be generated if the audio cable is placed too close to the power cable.
connections CONNECTING TO AN AUDIO SYSTEM (2 CHANNEL AMPLIFIER) 1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Duo HD player to the AUDIO (red and white) IN terminals of your Amplifier. 2. Using the video signal cable(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT terminals on the rear of the Duo HD player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminal of your TV as described on pages 20 to 25. 3. Turn on the Duo HD player, TV and Amplifier. 4.
CONNECTING TO AN AUDIO SYSTEM (7.1 CHANNEL AMPLIFIER) 2. Using the video signal cable(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT terminals on the rear of the Duo HD player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminal of your TV as described on pages 20 to 25. 3. Turn on the Duo HD player, TV and Amplifier. 4. Press the input select button of the Amplifier to select external input in order to hear sound from the Duo HD player.
connections CONNECTING TO AN AUDIO SYSTEM (DOLBY DIGITAL, DTS AMPLIFIER) 1. If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the Duo HD player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier. If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the Duo HD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2.
CONNECTING TO AN AUDIO SYSTEM (HDMI SUPPORTED AMPLIFIER) 2. Using the HDMI-HDMI cable, connect the HDMI OUT terminal of the Amplifier to the HDMI IN terminal of your TV. 3. Turn on the Duo HD player, TV, and Amplifier. 4. Press the input select button of the Amplifier to select external input in order to hear sound from the Duo HD player. Refer to your Amplifier's user manual to set the Amplifier's audio input. M Please turn the volume down when you turn on the Amplifier.
connections CONNECTING TO THE INTERNET By connecting your Duo HD Player to the Internet, you may be able to access and enjoy additional content with your HD DVD disc. Some HD DVD Sites provide downloadable control programs for improved interactivity. You can also update the player’s firmware via the Internet when available. 1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal on the rear of the Duo HD player to the LAN terminal of your modem. To LAN port Connecting using a router (e.g.
basic functions of your Duo HD player This section introduces basic playback functions and playback by disc type. • Turn on your TV and set it to the correct Video Input (the input the Duo HD player is connected to). • If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the POWER button, this screen comes up: If you want to select a language, press a NUMBER button.
basic functions of your Duo HD player ON-SCREEN MENU NAVIGATION Video System Setup System Information Music Setup Time Zone Language Setup Clock Set Audio Persistent Storage Management Subtitle System Update Disc Menu Twin Format Disc Menu Audio Setup Digital Output PCM Down Sampling Display Setup Dynamic Compression TV Aspect Movie Frame (24 Fs) Speaker Setup Resolution Screen Message Front Display HDMI Setup Anynet+ (HDMI-CEC) HDMI Format Network Setup Sharpness TCP/IP DVD Noise Red
TO PLAY A TWIN-FORMAT HD DVD DISC A To play a twin-format HD DVD disc, you should select HD DVD or DVD before inserting the disc. This can be enabled only for a twin-format HD DVD disc. 1. With the unit in Stop mode, press the MENU button. 3. Press the ▲▼ buttons to select System Setup, then press the ENTER or ► button. 4. Press the ▲▼ buttons to select Twin Format Disc, then press the ENTER or ► button. 5. Select HD DVD or DVD on the menu then press ENTER.
basic functions of your Duo HD player SLOW MOTION PLAY/STEP MOTION PLAY Slow Motion Play hAZCV In pause or step mode, press the SLOW button on the remote control for Slow Motion play. • If you press the SLOW button, 1/8 1/4 1/2 • To return to normal speed playback, press the PLAY/PAUSE ( ) button. M This ( ) icon indicates an invalid button press. No sound is heard during slow mode. Slow motion operates only in the forward direction.
system setup For your convenience, you can set this player’s features for the best use in your home environment. SETTING THE CLOCK 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. System Information Music System Setup Time Zone 3. Press the ▲▼ buttons to select System Setup, then press the ENTER or ► button. Language Setup Clock Set Audio Setup Persistent Storage Management Display Setup System Update 4.
language setup SETTING UP THE LANGUAGE OPTIONS If you set the audio, subtitle, disc menu and player menu, in advance, they will come up automatically every time you watch a movie. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. No Disc Music System Setup Setup Language Setup Audio Setup Display Setup HDMI Setup Network Setup Parental Setup 3. Press the ▲▼ buttons to select Language Setup, then press the ENTER or ► button.
audio setup SETTING UP THE AUDIO OPTIONS Allows you to set up the Audio device and sound status depending on the audio system being used with the player. 1. With the unit in Stop mode, press the MENU button. No Disc Language Setup Setup Audio Setup ● AUDIO SETUP 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. System Setup Music Display Setup HDMI Setup Network Setup Parental Setup 3. Press the ▲▼ buttons to select Audio Setup, then press the ENTER or ► button.
audio setup PCM Down Sampling • On : Select this when the Amplifier connected to the player is not 96KHz compatible. 96KHz signals will be down converted to 48KHz • Off : Select this when the Amplifier connected to the player is 96KHz compatible. Signals will be output without any changes.
SETTING UP THE SPEAKER OPTIONS If you have connected this player to an Amp/Receiver or Home theater via the 7.1 channel Analog outputs you need to set the Speaker Options for the best sound. 1. With the unit in Stop mode, press the MENU button. System Setup 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. No Disc Music Language Setup Setup Audio Setup Display Setup HDMI Setup Parental Setup 3. Press the ▲▼ buttons to select Audio Setup, then press the ENTER or ► button.
display setup SETTING UP THE VIDEO DISPLAY/OUTPUT OPTIONS This function allows you to setup the TV screen settings. This function depends on the disc or TV type. It may not work with some discs or TVs. 1. With the unit in Stop mode, press the MENU button. Language Setup No Disc Music Audio Setup Setup Display Setup HDMI Setup 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. Network Setup Parental Setup 3.
Movie Frame (24 Fs) Movies are usually filmed at 24 frames per second. Some Bluray/HD DVD discs have the capability of playing back at this frame rate. Setting the Movie Frame (24Fs) feature to ON allows you to adjust the Duo HD player's HDMI output to 24 frames per second for improved picture quality.
display setup ❖ Resolution according to the output mode (Simultaneous Output with HDMI) • BD/HD DVD playback Output Setup HDMI Component VIDEO/S-Video 1080p, Movie Frame(24Fs) off 1080p@60F 1080i 480i 1080p/1080i, Movie Frame (24Fs) on 1080p@24F - - 1080i, Movie Frame (24Fs) off 1080i 1080i 480i 720p 720p 720p 480i 480p 480p 480p 480i 480i 480p 480i 480i HDMI Component VIDEO/S-Video 1080p 1080p@60F 480i 480i 1080i 1080i 480i 480i 720p 720p 480i 480i 480p 480p 480
HDMI setup SETTING UP THE HDMI SETUP OPTIONS 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. Audio Setup No Disc Music Display Setup Setup HDMI Setup ● HDMI SETUP Network Setup 3. Press the ▲▼ buttons to select HDMI Setup, then press the ENTER or ► button. HDMI setup menu will be displayed. Parental Setup 4.
HDMI setup - Playback control buttons : - Menu operation button : - Numeric buttons : - Color buttons : A B C ENTER D TV Anynet+ Menu When pressing the Anynet+ button on your Samsung TV's Duo HD player remote control, the following On-Screen Display (OSD) will be View TV shown.
parental setup SETTING UP THE PARENTAL LOCK The Parental Lock function works in conjunction with BD/HD DVD/DVDs that have been assigned a rating which helps you control the types of BD/HD DVD/DVDs that your family watches. There are up to 8 rating levels on a disc. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. 3. Press the ▲▼ buttons to select Parental Setup, then press the ENTER or ► button.
parental setup Setting the Rating Level 1. Press the ▲▼ buttons to select Rating Level, then press the ENTER or ► button. HDMI Setup No Disc Music Network Setup Use Password : Off Setup Parental Setup Rating Level : 8 (Adults) 7 New Password 6 5 4 3 2 1 (Kids) 2. Press the ▲▼ buttons to select the rating level you want, then press the ENTER button. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play.
network setup You can enjoy contents provided by the movie studio or update your player via the Internet. Follow the steps below to ensure the best connection to the Internet for your player. To obtain information on the proper settings, check the network settings on your computer or contact your Internet provider. 1. With the unit in Stop mode/No Disc mode, press the MENU button. Display Setup 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button.
network setup M When you select an item, use the number and ▲▼◄► buttons. 7. When done, use the ▲▼ buttons to select Save, then press the ENTER button. 8. If you don’t want to save your work, use the ▲▼◄► buttons to select Cancel, then press the ENTER button. M The IP address used in this manual is for illustrative purposes only. You must refer to the your network settings for the actual IP address.
NETWORK THROUGHPUT Select the Internet modem type that is connected to your player. To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47. Display Setup No Disc Proxy Music HDMI Setup Cookie Setup Network Setup Network Throughput : Modem(28.8Kbps) Modem(28.8Kbps) Parental Setup NTP Server : On MAC Address Modem(33.6Kbps) : Off Modem(56Kbps) ISDN(64Kbps) Dual ISDN(128Kbps) ● NETWORK SETUP 4. Press the ▲▼ buttons to select Network Throughput, then press the ENTER or ► button.
persistent storage management SYSTEM DEVICE MANAGEMENT You can manage such information as stored provider and content directory. To setup, follow steps 1 to 2 in "TCP/IP Setting" on page 47. Time Zone Clock Set Music 3. Press the ▲▼ buttons to select System Setup, then press the ENTER or ► button. Setup No Disc 4. Press the ▲▼ buttons to select Persistent Storage Management, then press the ENTER or ► button.
system upgrade Samsung may offer upgrades to your Duo HD player's firmware in the future. To upgrade this firmware you must : 1. Go to samsung.com and refer to 'SUPPORT' page to download the firmware and burn an update CD. or 2. Connect this player's LAN terminal to the LAN terminal on your modem (see page 30) and follow the steps below. ● SYSTEM UPGRADE FIRMWARE UPGRADE 1. With the unit in No Disc mode(no disc in the unit), press the MENU button. Music No Disc System Setup Setup 2.
system upgrade 6. To perform the system upgrade, press the ◄► buttons to select Start and then press the ENTER button. Clock Set Persistent Storage Management Music No Disc Setup System Setup System Update System Update 1 2 3 4 5 Language Setup data was Twinfound. Format Disc The new update : HD DVD AudioCurrent Setup Version : XXXXX New Version : XXXXX Display Setup HDMI Start Setup Cancel Network Setup Parental Setup 7. The system update gets started.
SYSTEM INFORMATION When the firmware upgrade is done, check the firmware details by following the steps below. 1. With the unit in Stop mode, press the MENU button. Music No Disc Setup 3. Press the ▲▼ buttons to select System Setup, then press the ENTER or ► button. ● SYSTEM UPGRADE 2. Press the ▲▼ buttons to select Setup, then press the ENTER or ► button. System Setup Language Setup Audio Setup Display Setup HDMI Setup Network Setup Parental Setup 4.
watching a movie USING THE DISPLAY FUNCTION hAZCV 1. During playback, press the INFO button on the remote control. 2. Press the ▲▼ buttons to select the desired item. 3. Press the ◄► buttons to make the desired setup and then press the ENTER button. • You may use the number buttons of the remote control to directly access a title, chapter or to start the playback from a desired time.
USING THE DISC MENU & POPUP/TITLE MENU hAZ Using the Disc Menu PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS 2. Press the ▲▼◄► buttons to make the desired setup, then press the ► or ENTER button. • The Disc menu setup items may vary from disc to disc. ▼ 3 M 4 5 6 7 8 9 10 11 12 13 14 15 Depending on the disc, the Disc Menu may not be available. You can use various menu options provided by your BD/HD DVD in different ways, according to the disc type.
watching a movie REPEAT PLAY Repeat the current chapter or title. hZCV Repeat playback 1. During playback, press the REPEAT button on the remote control. Repeat screen appears. Repeat Off 2. Press the ▲▼ buttons to select Chapter or Title. • BD/HD DVD/DVD repeats play by chapter or title. 3. To return to normal play, press the REPEAT button again, then press the ▲▼ buttons to select Off. M Depending on the disc, the Repeat function may not be available.
hAZ SELECTING THE AUDIO LANGUAGE You can select a desired audio language quickly and easily with the AUDIO button. Using the AUDIO button Audio ENG Dolby Digital Multi CH 2. To remove the AUDIO icon, press the CANCEL or RETURN button. Using the INFO button 1. During playback, press the INFO button on the remote control. 2. Press the ▲▼ buttons to select Audio language. 3. Press the ◄► buttons on the remote control to select the desired audio.
watching a movie SELECTING THE SUBTITLE LANGUAGE You can select a desired subtitle quickly and easily with the SUBTITLE button. hAZ Using the SUBTITLE button 1. Press the SUBTITLE button. The subtitle changes when the button is pressed repeatedly. The subtitle languages are represented by abbreviations. Subtitle ENG 2. To remove the SUBTITLE icon, press the CANCEL or RETURN button. Using the INFO button 1. During playback, press the INFO button on the remote control. 2.
CHANGING THE CAMERA ANGLE When a BD/HD DVD/DVD contains multiple angles of a particular scene, you can use the ANGLE function. 1. During playback, press the INFO button on the remote control. 2. Press the ▲▼ buttons to select Angle. BD Info Title : 001/006 Chapter : 003/016 Playing Time : 00:11:14 Audio : ENG Multi CH Subtitle : ENG Angle : 01/01 § Change ¨ Move 3. Press the ◄► buttons or you can use the number buttons on the remote control to select the desired angle.
listening to music B PLAYING AN AUDIO CD(CD-DA) 1. Insert an Audio CD(CD-DA) into the disc tray. For an audio CD, the first track will be played automatically. TRACK 001 CD 01/12 ► 00:01:29 / 00:04:06 2. To move to the Music List, press the STOP or RETURN button. The Music List screen is displayed a Play Mode 3. Press the ▲▼ buttons to select the track you want to play, and then press the ENTER button.
BUTTONS ON THE REMOTE CONTROL USED FOR AUDIO CD (CD-DA) DISC PLAYBACK 1. SKIP ( ) button: During playback, plays the next track. Moves to the next page in the Music List or the Playlist. 2. PLAY/PAUSE ( ) button: Plays the currently selected track. If pressed during playback, the current track is paused. 4. COLOR buttons: RED(A), GREEN(B), YELLOW(C) • RED(A) button : Selects the Play Mode(Repeat) during playback. • GREEN(B) button : Go to Playlist from Music List/Go to Music list from Playlist.
listening to music Playlist You can create a playlist with up to 99 tracks. Video To setup, follow steps 1 to 2 in page 60. 1. Press the GREEN(B) button. Music CD Setup TRACK 006 00:03:20 TRACK 007 00:03:32 TRACK 008 00:04:36 TRACK 009 00:04:17 TRACK 010 00:04:11 TRACK 011 00:04:07 TRACK 012 00:04:46 TRACK 013 00:04:21 TRACK 014 00:03:43 b Playlist Original Playlist Video 2. Press the ▲▼ buttons to select a track, then press the ENTER button to add it to the Playlist.
troubleshooting Before requesting service, please check the following. PROBLEM SOLUTION • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again. Disc does not play.
troubleshooting PROBLEM SOLUTION If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. • Press the $ button (in front panel) for more than 5 seconds with no disc inside. All settings will revert to the factory settings. Forgot password • Press the $ button (in front panel) for more than 5 seconds with no disc inside. All settings including the password will revert to the factory settings. Don't use this unless absolutely necessary.
appendix SPECIFICATIONS AC 120V, 60Hz Power Consumption 42 W Weight 9.3 Ibs Dimensions 16.9 (W) x 12.8 (D) x 3.1 (H) inches Operating Temperature Range +41°F to +95°F Operating Humidity Range 10 % to 75 % BD (Blu-ray Disc) Reading Speed : 4.917m/sec HD DVD Reading Speed : 6.61m/sec DVD (Digital Versatile Disc) Disc CD : 5 inches (COMPACT DISC) CD : 3 1/2 inches (COMPACT DISC) Composite Video ● APPENDIX General Power Requirements Reading Speed : 3.49 ~ 4.06 m/sec. Approx.
COPY PROTECTION Compliance and Compatibility Notice • Because AACS (Advanced Access Content System) is approved as content protection system for BD and HD DVD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA 1-800-SAMSUNG(726-7864) www.samsung.com/latin VENEZUELA COLOMBIA BELGIUM 0-800-100-5303 01-8000112112 0032 (0)2 201 24 18 844 000 844 Distributor pro ýeskou republiku : Samsung Zrt.
AK68-01477B BD-UP5000 User’s Manual Iecteur Duo HD Duo HD Player Manuel d’utilisation BD-UP5000 AK68-01477B
caractéristiques principales de votre nouveau lecteur de disque Duo HD Caractéristiques du lecteur Peut accueillir une grande variété de disques vidéo Peut accueillir les disques BD, HD DVD, DVD vidéo, DVD-RW/-R (en mode V finalisés uniquement). HDMI (High Definition Multimedia Interface) (Interface Multimédia haute définition) Le format HDMI réduit les parasites des images en fournissant un chemin d’accès pur au signaux vidéo / audio numériques depuis le lecteur jusqu’à votre téléviseur.
Plans graphiques Deux couches individuelles à pleine résolution HD (1920x1080) sont disponibles par dessus la couche vidéo HD. Une de cescouches est affectée aux graphiques reliés au vidéo (comme les sous-titres) et l’autre aux éléments interactifs comme les touches ou les menus. Plusieurs effets de volet, de fondu et de défilement peuvent être disponibles sur les deux couches.
directives de sécurité AVERTISSEMENT POUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE RETIREZ PAS LE COUVERCLE (NI LE PANNEAU ARRIÈRE). AUCUNE PIÈCE SITUÉE À L'INTÉRIEUR NE PEUT ÊTRE RÉPARÉE PAR L'UTILISATEUR. POUR TOUT DÉPANNAGE, ADRESSEZ-VOUS À UN TECHNICIEN QUALIFIÉ.
ATTENTION CE PRODUIT UTILISE UN RAYON LASER. L’UTILISATION DES COMMANDES OU LE RÉGLAGE OU LA PERFORMANCE DE PROCÉDURES AUTRES QUE CELLES PRÉCISÉES CI-DESSUS PEUT PROVOQUER UNE EXPOSITION DANGEREUSE AUX RADIATIONS. NE TENTEZ PAS D’OUVRIR LE COUVERCLE OU DE RÉPARER VOUS-MÊME L’APPAREIL. POUR TOUT DÉPANNAGE, ADRESSEZ-VOUS À UN TECHNICIEN QUALIFIÉ. Remarques : • Cet appareil ne doit être utilisé qu'avec une alimentation de 120 V CA, 60Hz. Il ne peut être utilisé ailleurs.
directives de sécurité 12) Utilisez le support vendu avec l’appareil ou utilisez uniquement un support,table à roulettes,meuble,tré pied ou table qui est conforme aux recommandations du fabricant.Si l’appareil est install é sur une table à roulettes,déplacez-la avec la plus grande précaution afin d’éviter toute blessure et tout dommage. 13) Débranchez l’appareil lors d ’un orage électrique ou en cas de non utilisation prolongée. 14) Confiez l'ensemble des réparations au personnel qualifié.
table des matières 3 À L'intérieur 4 5 Avertissement Consignes de précautions PREMIERS PAS 9 10 13 Avant de lire ce manuel de l’utilisateur Type et caractéristiques des disques Stockage des disques et gestion DESCRIPTION 14 14 15 Panneau avant Afficheur du panneau avant Panneau arrière TÉLÉCOMMANDE 16 18 18 19 Tournée de la télécommande Réglage de la télécommande Concernant le Bloc-piles Codes téléviseur contrôlables RACCORDEMENTS 20 21 22 23 24 25 26 Raccordement à un téléviseur avec le câble
table des matières 37 39 Configuration des options audio Configuration des paramètres de langue OPTIONS D'AFFICHAGE 40 Configuration des options d’affichage et de sortie vidéo CONFIGURATION HDMI 43 Réglage des options HDMI CONTRÔLE PARENTAL 45 Configuration du contrôle parental CONFIGURATION DU RÉSEAU 47 48 48 49 49 49 Réglage TCP/IP Réglage du serveur mandataire Réglage des témoins internet Débit du réseau Configuration du serveur NTP Adresse MacIntosh GESTION DU STOCKAGE CONTINUEL 50 Gestion des
premiers pas AVANT DE LIRE CE MANUEL DE L’UTILISATEUR Veuillez vérifier les termes suivants avant de lire le manuel de l’utilisateur. Les icônes utilisés dans le manuel Terme Définition h BD-ROM Implique une fonction disponible sur le BD-ROM. HD DVD-ROM Cela implique une fonction disponible sur un DVD-ROM HD. Vidéo DVD Implique une fonction disponible sur les disques DVD-vidéo ou DVD-R/ DVD-RW enregistrés et finalisés en mode vidéo.
premiers pas TYPE ET CARACTÉRISTIQUES DES DISQUES Types de disques compatibles pour la lecture Types de disque Logo des disques Contenu enregistré BD-ROM AUDIO + VIDÉO HD DVD-ROM AUDIO + VIDÉO DVD-VIDEO Durée maximale de lecture Simple face (25 Go, 5 po) La durée de lecture dépend des titres Double face (50 Go, 5 po) Simple face (15 Go, 5 po) – Double face (30 Go, 5 po) AUDIO + VIDÉO AUDIO-CD Forme de disque AUDIO Simple face (5 po) 240 Double face (5 po) 480 Simple face (3 1/2 po) 80
Disques incompatibles • Les disques Blu-ray avec code régional autre que « Region A ». • BD-R, BD-RE • Disques DVD-Vidéo avec code régional autre que le "1" ou "ALL" • HD DVD-R • • • • • DVD-RAM Disques DVD-R 3,9 Go pour système auteur. Disques DVD-RW (VR mode) Disques DVD-ROM/PD/MV, etc. Disques CVD/CD-ROM/CD-RW/CDV/CD-G/ CD-I/LD Code régional Le lecteur Duo HD et les disques sont codés par région. Ces codes régionaux doivent correspondre pour permettre la lecture du disque.
premiers pas Compatibilité du disque HD DVD Le format HD DVD est récent et des problèmes de compatibilité sont possibles avec les disques au nouveau format ou au format existant. Les disques ne sont pas tous compatibles. Si vous éprouvez des problèmes de compatibilité, veuillez contacter un centre d’aide à la clientèle SAMSUNG.
❖ Lecture de disques DVD-R • Dès qu’un disque DVD-R enregistré en mode Vidéo est finalisé, il devient un DVD-Vidéo. • Cet appareil peut lire les disques DVD-R enregistrés et finalisés sur un graveur DVD-Vidéo Samsung. Il peut être incapable de lire certains disques DVD-R selon leur type et la condition de l’enregistrement. ❖ Lecture de disques DVD-RW • Seuls les disques DVD-RW au format vidéo et finalisés peuvent être lus.
description PANNEAU AVANT TIROIR DISQUE S’ouvre pour accepter un disque. TOUCHE OPEN/CLOSE Permet d'ouvrir et de fermer le tiroir disque. CAPTEUR DE LA TÉLÉCOMMANDE Il détecte tout signal venant de la télécommande. TOUCHE LECTURE / PAUSE Effectue la lecture ou l‘arrête momentanément. TOUCHE ARRÊT Arrête la lecture. TOUCHES RECHERCHE / SAUT Saute vers le prochain titre / chapitre / piste ou revient vers le titre / chapitre / piste précédent. AFFICHEUR Affiche l’état de lecture, l’heure, etc.
PANNEAU ARRIÈRE ● DESCRIPTION A 1 Ventilateur Le ventilateur fonctionne continuellement lorsque l’appareil est alimenté. Veillez à assurer un minimum d’espace libre de 10 cm (4 po) de tous les côtés du ventilateur lors del’installation. 7,1CH ANALOG AUDIO OUT Raccordez à la prise d’entrée analogique 7,1 canaux d’un amplificateur A / V.
16_ télécommande Appuyez pour effectuer une recherche vers l’avant ou l’arrière. Touches RECHERCHE ARRIÈRE / AVANT Touches SAUT ARRIÈRE / AVANT Appuyez pour sauter vers l’avant ou vers l’arrière. À chaque fois que vous appuyez sur cette touche, le disque joue plus lentement. Touche SLOW Touche CANCEL Touches numériques Touche POWER Appuyez pour ouvrir et fermer le tiroir disque. Touche OPEN/CLOSE 1. Retirez le couvercle à l'arrière de la télécommande tel qu'indiqué. 2. Insérez deux piles AAA.
Touche TV VOL Appuyez pour modifier la langue de sous-titrage d'un BD/HD DVD/DVD. Touche SUBTITLE Vous pouvez reprendre la lecture à partir du dernier point d'arrêt. Touche RESUME PLAY Permet l’accès à diverses fonctions audio d’un disque (BD/HD DVD/DVD). Touche AUDIO Touche COULEURS : ROUGE (A), VERT (B), JAUNE (C), BLEU (D) Utilisez pour accéder au menu du disque. Touche DISC MENU Permet d’afficher le réglage actuel ou l’état du disque.
télécommande RÉGLAGE DE LA TÉLÉCOMMANDE Cette télécommande vous permet de contrôler certaines fonctions de votre téléviseur. Les touches de commande des fonctions comprennent : TV POWER, TV CH ,., TV VOL (VOLUME) + –, TV MUTE, TV INPUT SEL.. Cependant, la touche DIRECTION/ENTER (DIRECTION/ENTRÉE) ne fonctionne que lorsque la touche TV INPUT SEL. est sélectionnée. Suivez les directives ci-dessous pour déterminer la compatibilité de votre téléviseur. 1. Allumez votre téléviseur. 2.
CODES TÉLÉVISEUR CONTRÔLABLES Marque SAMSUNG Code TV POWER+01, +02, +03, +04, +05, +06, +07, +08, +09 AIWA TV POWER+82 ANAM TV POWER+10, +11, +12, +13, +14, +15, +16, +17, +18 TV POWER+57 BLAUPUNKT TV POWER+71 BRANDT TV POWER+73 BRIONVEGA TV POWER+57 CGE TV POWER+52 CONTINENTAL EDISON TV POWER+75 DAEWOO TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34 EMERSON TV POWER+64 FERGUSON TV POWER+73 FINLUX TV POWER+06, +49, +57 FORMENTI TV POWER+57 FUJITSU TV P
raccordements Cette section implique plusieurs méthodes de raccorder le lecteur Duo HD à d'autres périphériques, un téléviseur par exemple. RACCORDEMENT À UN TÉLÉVISEUR AVEC LE CÂBLE HDMI 1. À l’aide d’un câble HDMI-HDMI (non compris), raccordez la prise HDMI OUT à l’arrière du lecteur Duo HD à la prise HDMI IN de votre téléviseur. 2. Appuyez sur la touche INPUT (ENTRÉE) de votre télécommande jusqu’à ce que le signal HDMI du lecteur Duo HD apparaisse à l'écran.
FONCTION DE DÉTECTION AUTOMATIQUE HDMI La sortie vidéo du lecteur passe automatiquement en mode HDMI lorsque que vous branchez un câble HDMI alors qu'il est allumé (voir page 42). M Certains modes de résolution de sortie peuvent ne pas fonctionner en fonction de votre téléviseur. Veuillez vous reporter au manuel d’utilisation du téléviseur pour plus de détails.
raccordements RACCORDEMENT À UN TÉLÉVISEUR AVEC LA PRISE DVI 1. À l’aide des câbles HDMI-DVI (non compris), raccordez la prise HDMI OUT à l’arrière du lecteur Duo HD à la prise DVI IN de votre téléviseur. 2. À l’aide des câbles audio, raccordez les prises AUDIO OUT (rouge et blanche) à l’arrière du lecteur Duo HD aux prises AUDIO IN (rouge et blanche) de votre téléviseur. Allumez le lecteur Duo HD et le téléviseur. 3. Appuyez sur la touche TV INPUT SEL.
RACCORDEMENT À UN TÉLÉVISEUR (COMPONENT) Raccordement de votre téléviseur à l’aide du câble Composantes. Vous profiterez d’images de haute qualité à reproduction de couleur précise. Le format vidéo Composantes sépare les éléments de l’image en signaux noir et blanc (Y), bleu (PB), et rouge (PR) pour reproduire des images lumineuses et plus claires. (Les signaux audio sont transmis par la sortie audio.) 1.
raccordements RACCORDEMENT À UN TÉLÉVISEUR (S-VIDEO) Raccordement de votre téléviseur à l’aide du câble S-Vidéo. Vous profiterez d’images de haute qualité. Le format S-Vidéo sépare les éléments de l’image en signaux noir et blanc (Y) et couleur (C) pour reproduire une image plus nette que le mode d'entrée vidéo ordinaire. (Les signaux audio sont transmis par la sortie audio.) 1.
RACCORDEMENT À UN TÉLÉVISEUR (VIDEO) 1. À l’aide des câbles vidéo / audio, raccordez les prises de sortie VIDEO (jaune) / AUDIO OUT (rouge et blanche) à l’arrière du lecteur Duo HD aux prises d’entrée VIDEO (jaune) / AUDIO IN(rouge et blanche) de votre téléviseur. 3. Appuyez sur le sélecteur d’entrée de la télécommande de votre téléviseur jusqu’à ce que le signal vidéo du lecteur Duo HD apparaisse à l’écran du téléviseur.
raccordements RACCORDEMENT À UN SYSTÈME AUDIO (AMPLIFICATEUR À 2 CANAUX) 1. À l’aide des câbles audio, raccordez les prises AUDIO OUT (rouge et blanche) à l’arrière du lecteur Duo HD aux prises AUDIO IN (rouge et blanche) de votre amplificateur. 2. À l'aide des câbles vidéo, raccordez les prises HDMI, COMPONENT, S-VIDEO ou VIDEO OUT sur le panneau arrière du lecteur Duo HD aux prises HDMI, COMPONENT, S-VIDEO ou VIDEO IN de votre téléviseur tel que décrit aux pages 20 à 25. 3.
RACCORDEMENT À UN SYSTÈME AUDIO (AMPLIFICATEUR À 7,1 CANAUX) 2. À l'aide des câbles vidéo, raccordez les prises HDMI, COMPONENT, S-VIDEO ou VIDEO OUT sur le panneau arrière du lecteur Duo HD aux prises HDMI, COMPONENT, S-VIDEO ou VIDEO IN de votre téléviseur tel que décrit aux pages 20 à 25. 3. Allumez le lecteur Duo HD, le téléviseur et l’amplificateur. 4. Appuyez sur la touche de sélection d’entrée de l’amplificateur pour sélectionner entrée externe pour entendre le son depuis le lecteur Duo HD.
raccordements RACCORDEMENT À UN SYSTÈME AUDIO (DOLBY NUMÉRIQUE), AMPLIFICATEUR DTS (SYSTÈME CINÉMA NUMÉRIQUE) 1. Si vous utilisez un câble optique (non compris), raccordez la prise DIGITAL AUDIO OUT (OPTICAL) à l’arrière du lecteur Duo HD à la prise DIGITAL AUDIO IN (OPTICAL) de votre amplificateur.
RACCORDEMENT À UN SYSTÈME AUDIO (AMPLIFICATEUR COMPATIBLE HDMI) 2. À l’aide du câble HDMI-HDMI, raccordez la prise HDMI OUT de l’amplificateur à la prise HDMI IN de votre téléviseur. 3. Allumez le lecteur Duo HD, le téléviseur et l’amplificateur. 4. Appuyez sur la touche de sélection d’entrée de l’amplificateur pour sélectionner entrée externe pour entendre le son depuis le lecteur Duo HD. Reportezvous au manuel de l’utilisateur de votre amplificateur pour en régler les entrées audio.
raccordements BRANCHEMENT SUR L'INTERNET Si votre lecteur Duo HD est branché sur l'Internet, vous pouvez accéder à et profiter d'autres contenus HD DVD. Certains sites HD DVD comportent des logiciels de contrôle téléchargeables (micrologiciels) afin d'en améliorer l'interactivité. S'il est disponible, vous pouvez mettre le micrologiciel du lecteur à niveau par Internet. 1. À l’aide d’un câble RLE (câble UTP), raccordez le terminal RLE à l’arrière du lecteur Duo HD au terminal RLE de votre modem.
fonctions de base de votre lecteur Duo HD Cette section vous présente les fonctions de lecture de base et de la lecture selon le type de disque. • Allumez votre téléviseur et définissez la source vidéo appropriée (l’entrée sur laquelle le lecteur Duo HD est branché). • Si vous avez raccordé un système audio externe, allumez-le et réglez l'entrée audio.
fonctions de base de votre lecteur Duo HD NAVIGATION DANS LES MENUS À L’ÉCRAN Vidéo Information système Système Musique Param. Fus. Hor. Réglage de langue Param.Horloge Audio Gestion stockage durable Sous-titre Dém. m. à niv. Menus du Disque Disque format Twin Menus Options Audio Sortie numérique Sous Echantionnage PCM Options D'affichage Compression dyna. Format écran Param.
COMMENT LIRE UN DISQUE HD DVD DOUBLE-FORMAT A Pour lire un disque HD DVD double-format, vous devez sélectionner HD DVD ou DVD avant d'insérer le disque. Cette fonction n'est activée qu'avec un disque HD DVD double-format. 1. Appuyez sur la touche MENU, appareil en mode d'arrêt. 3. Appuyez sur les touches ▲▼ pour sélectionner Système, puis appuyez sur la touche ENTER ou ►. 4. Appuyez sur les touches ▲▼ pour sélectionner Disque format Twin, puis appuyez sur la touche ENTER ou ►. 5.
fonctions de base de votre lecteur Duo HD POUR RETOURNER AU DÉBUT DU CHAPITRE PRÉCÉDENT, APPUYEZ DE NOUVEAU. Lecture au ralenti hAZCV En mode PAUSE ou ARRÊT, appuyez sur la touche SLOW de la télécommande pour effectuer la lecture au ralenti. • Si vous appuyez sur la touche SLOW, 1/8 1/4 1/2 • Pour repasser en lecture à vitesse normale, appuyez sur la touche LECTURE / PAUSE ( ). M L’icône ( ) indique qu’une touche non valide a été actionnée. Aucun son n’est perceptible en mode LENT.
configuration du système Vous pouvez configurer les fonctions du lecteur à votre goût, pour une utilisation optimale en fonction de l'ambiance de votre foyer. RÉGLAGE DE L’HORLOGE 1. Appuyez sur la touche MENU, appareil en mode d'arrêt. 2. Appuyez sur les touches ▲▼ pour sélectionner Param., puis appuyez sur la touche ENTER ou ►. Information système Musique Système Fus. Hor. 3. Appuyez sur les touches ▲▼ pour sélectionner Système, puis appuyez sur la touche ENTER ou ►. Réglage de langue Param.
réglage de langue CONFIGURATION DES PARAMÈTRES DE LANGUE Si vous avez préalablement réglé les options audio, soustitrage, menu disque et menu lecteur, elles apparaissent automatiquement à chaque fois que vous visionnez un film. 1. Arrêtez l’appareil, puis appuyez sur la touche MENU. 2. Appuyez sur les touches ▲▼ pour sélectionner Param., puis appuyez sur la touche ENTER ou ►. No Disc Musique Système Param. Réglage de langue Options Audio Options D'affichage Configuration HDMI Config.
options audio CONFIGURATION DES OPTIONS AUDIO Vous permet de régler l’appareil audio et le son en fonction du système audio utilisé avec le lecteur. 1. Arrêtez l’appareil, puis appuyez sur la touche MENU. Système No Disc Musique Réglage de langue Param. Options Audio ● OPTIONS AUDIO 2. Appuyez sur les touches ▲▼ pour sélectionner Param., puis appuyez sur la touche ENTER ou ►. Options D'affichage Configuration HDMI Config. réseau Contrôle Parental 3.
options audio Échantillonnage PCM • Oui : à sélectionner si l’amplificateur raccordé au lecteur n’est pas compatible avec la fréquence de 96 KHz. Les signaux de 96 kHz sont abaissés en fréquence à 48 kHz • Non : à sélectionner si l’amplificateur raccordé au lecteur est compatible avec la fréquence de 96 KHz. Les signaux sont transmis sans aucune modification. M Système No Disc Musique Réglage de langue Param.
CONFIGURATION DES PARAMÈTRES DE LANGUE Si vous avez raccordé celecteur à un amplificateur/syntoniseur ou à un cinéma maison par les prises de sortie analogique à 7,1 canaux, vous devez régler les options des enceintes acoustiques pour la meilleure qualité de son. 1. Arrêtez l’appareil, puis appuyez sur la touche MENU. Système 2. Appuyez sur les touches ▲▼ pour sélectionner Param., puis appuyez sur la touche ENTER ou ►. No Disc Musique Réglage de langue Param. Options Audio Options D'affichage Config.
options d'affichage CONFIGURATION DES OPTIONS D’AFFICHAGE ET DE SORTIE VIDÉO Cette fonction vous permet de configurer les réglages de l’écran de votre téléviseur. Cette fonction dépend du type de disque ou de téléviseur. Il est possible qu'elle ne fonctionne pas avec certains types de disque ou de téléviseur. Réglage de langue Musique Param. Options Audio Options D'affichage No Disc Configuration HDMI Config. réseau 1. Arrêtez l’appareil, puis appuyez sur la touche MENU. Contrôle Parental 2.
Trame Vidéo (24Fs) Les films sont normalement filmés àune cadence de 24 images par seconde. Certains disques Blu-ray/HD DVD ont la capacité de réaliser la lecture à cettecadence. L’activation dela fonction Trame Vidéo (24Fs) (Cadence du film (24 i/s)) (ON (Activée)) vous permet de régler la sortie HDMI du lecteur Duo HD à 24 images par seconde afin d’améliorer la qualité du film. Réglage de langue Musique Options Audio Format écran : 16:9 Large Param.
options d'affichage ❖ Résolution en fonction du mode de sortie (Sortie simultanée par HDMI) • Lecture BD/HD DVD : Sortie HDMI Composantes VIDÉO/S-Vidéo 1080p, Trame Vidéo (24Fs) Non 1080p@60F 1080i 480i 1080p/1080i, Trame Vidéo (24Fs) Oui 1080p@24F – – 1080i, Trame Vidéo (24Fs) Non 1080i 1080i 480i 720p 720p 720p 480i 480p 480p 480p 480i 480i 480p 480i 480i HDMI Composantes VIDÉO/S-Vidéo 1080p 1080p@60F 480i 480i 1080i 1080i 480i 480i 720p 720p 480i 480i 480p 480p
configuration HDMI RÉGLAGE DES OPTIONS HDMI 1. Arrêtez l’appareil, puis appuyez sur la touche MENU. 2. Appuyez sur les touches ▲▼ pour sélectionner Param., puis appuyez sur la touche ENTER ou ►. Options Audio Musique Options D'affichage Param. Configuration HDMI No Disc ● CONFIGURATION HDMI Config. réseau 3. Appuyez sur les touches ▲▼ pour sélectionner Configuration HDMI, puis appuyez sur la touche ENTER ou ►. Le menu de réglage HDMI s'affiche. Contrôle Parental 4.
configuration HDMI • Touches disponibles sur la télécommande des téléviseurs Samsung : ces touches fonctionnent de la même façon que celles de la télécommande du lecteur. - Touches de contrôle de la lecture : - Touche de manipulation du menu : - Touches numériques : - Touches de couleur : A B C D ENTER Menu Anynet+ du téléviseur Si vous appuyez sur la touche Anynet+ de la télécommande Duo HD player du téléviseur, l’affichage suivant apparaît à l’écran (OSD View TV (Affichage à l’écran)).
contrôle parental CONFIGURATION DU CONTRÔLE PARENTAL La fonction Parental Lock (Contrôle parental) est utilisée en conjonction avec les BD/HD DVD/DVD auxquels une cote a été attribuée, ce qui vous permet de contrôler les types de BD/HD DVD/DVD que votre famille regarde. Vous pouvez retrouver jusqu’à 8 niveaux de cote sur un disque. 1. Arrêtez l’appareil, puis appuyez sur la touche MENU. 2. Appuyez sur les touches ▲▼ pour sélectionner Param., puis appuyez sur la touche ENTER ou ► 3.
contrôle parental Configuration du niveau de cote 1. Appuyez sur les touches ▲▼ pour sélectionner Niv. Contrôle, puis appuyez sur la touche ENTER ou ►. Configuration HDMI No Disc Musique Config. réseau Utiliser le Code : Non Param. Contrôle Parental Niv. Contrôle :Niveau8 8 (Adults) (Adulte) Niveau7 Créer le code Niveau6 Niveau5 Niveau4 Niveau3 Niveau2 Niveau1 (enfants) 2. Appuyez sur les touches ▲▼ pour sélectionner le niveau de cote approprié, puis appuyez sur la touche ENTER.
configuration du réseau RÉGLAGE TCP/IP 1. Mettez l’appareil en mode Stop/No Disc (Arrêt/Aucun disque), puis appuyez sur la touche MENU. Options D'affichage 2. Appuyez sur les touches ▲▼ pour sélectionner Param., puis appuyez sur la touche ENTER ou ►. No Disc Musique Configuration HDMI Param. Config. réseau TCP/IP Contrôle Parental Proxy 3. Appuyez sur les touches ▲▼ pour sélectionner Config. réseau, puis appuyez sur la touche ENTER ou ►. Témoin : Oui Débit réseau : Modem(28.
configuration du réseau M Pour sélectionner un élément, utilisez les touches numériques et ▲▼◄► 7. Une fois l’opération effectuée, utilisez les touches ▲▼ pour sélectionner Enreg, puis appuyez sur ENTER. 8. Si vous ne souhaitez pas enregistrer votre travail, utilisez les touchese ▲▼◄► pour sélectionner Annuler, puis appuyez sur ENTER. M L’adresse IP utilisée dans ce manuel n’est qu’à titre d’exemple. Vous devez vous reporter à vos paramètres réseaux pour définir l'adresse IP réelle.
DÉBIT DU RÉSEAU Sélectionnez le type de modem Internet branché sur votre lecteur. Pour configurer, suivez les étapes 1 à 3 du chapitre « Réglages TCP/IP » à la page 47. 4. Appuyez sur les touches ▲▼ pour sélectionner Débit réseau, puis appuyez sur la touche ENTER ou ►. • Sortie à débit réseau disponible Options D'affichage Proxy - Modem (28,8 k, 33,6 k, 56 kb/s) Musique Configuration HDMI Témoin : Oui - ISDN (réseau numérique à intégration de services) (64 kb/s) Config. réseau Débit réseau : Modem(28.
gestion du stockage continuel GESTION DES DISPOSITIFS SYSTÈME Vous pouvez administrer de telles informations comme répertoire des fournisseurs et du contenu. Pour configurer, suivez les étapes 1 et 2 du chapitre « Réglages TCP/IP » à la page 47. 3. Appuyez sur les touches ▲▼ pour sélectionner Système, puis appuyez sur ENTER ou sur la touche ►. Fus. Hor. No Disc Param. 4. Appuyez sur les touches ▲▼ pour sélectionner Gestion stockage durable, puis appuyez sur ENTER ou sur la touche ►. 5.
mise à niveau du système Samsung offre parfois des mises à niveau pour le micrologiciel du lecteur Duo HD du futur. Pour mettre ce micrologiciel à niveau, vous devez : 1. Consulter le site samsung.com et reportez-vous à la page « SUPPORT » pour télécharger le micrologiciel et gravez un CD de mise à niveau. ou MISE À NIVEAU DU MICROLOGICIEL 1. Mettez l’appareil en mode No Disc (aucun disque), puis appuyez sur la touche MENU. 2. Appuyez sur les touches ▲▼ pour sélectionner Param.
mise à niveau du système 6. Pour effectuer la mise à niveau du système, appuyez sur les touches ◄► pour sélectionner Démar., puis appuyez sur ENTER. Param.Horloge Musique No Disc Gestion stockage durable Système Param.Dém. m. à niv. Dém. m.1 à2niv. 3 4 5 Nouv. données j. trouvées. Réglage de languede m. àDisque format Twin : HD DVD Version actuelle : XXXXX Options Audio Nouvelle version : XXXXX Options D'affichage Démar. Annuler Configuration HDMI Config. réseau Contrôle Parental 7.
INFORMATION SYSTÈME Lorsque la mise à niveau du micrologiciel est terminée, vérifiez les détails concernant le mic rologiciel en suivant les étapes plus bas. 1. Arrêtez l’appareil, puis appuyez sur la touche MENU. Musique Param. Système No Disc Réglage de langue 3. Appuyez sur les touches ▲▼ pour sélectionner Système, puis appuyez sur la touche ENTER ou ►. Options Audio Options D'affichage Configuration HDMI Config. réseau 4.
visionner un film UTILISATION DE LA FONCTION AFFICHEUR hAZCV 1. Appuyez sur la touche INFO de la télécommande en cours de lecture. 2. Appuyez sur les touches ▲▼ pour sélectionner l’élément approprié. 3. Appuyez sur la touche ◄► pour effectuer la configuration appropriée, puis appuyez sur la touche ENTER. • Les touches numériques de la télécommande vous permettent un accès direct à un titre, un chapitre ou vous permettent de lancer la lecture à l’heure souhaitée.
UTILISATION DE MENUS DU DISQUE & CONTEXTUEL / TITRE MENU hAZ Utilisation de Menu disque 2. Appuyez sur les touches ▲▼◄► pour effectuer la configuration appropriée, puis appuyez sur la touche ► ou ENTER. • Les éléments de configuration du menu disque peuvent varier d’un disque à l’autre. M PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS ▼ 3 4 5 6 7 8 9 10 11 12 13 14 15 En fonction du disque, le menu disque peut ne pas fonctionner.
visionner un film LECTURE EN BOUCLE (RÉPÉTITION) Effectue la lecture en boucle du chapitre ou du titre actuel. hZCV Lecture en boucle 1. Appuyez sur la touche REPEAT de la télécommande en cours de lecture. L’écran de lecture en boucle apparaît. Répétition Non 2. Appuyez sur les touches ▲▼ pour sélectionner le chapitre ou le titre approprié. • Le BD/HD DVD/DVD effectue la lecture en boucle par chapitre ou par titre. 3.
hAZ SÉLECTION DE LANGUE AUDIO Vous pouvez sélectionner rapidement et facilement la langue appropriée à l’aide de la touche AUDIO. Utilisation de la touche AUDIO Audio ENG Dolby Digital Plus 5.1CH 2. Pour enlever l’icône AUDIO, appuyez sur la touche CANCEL ou RETURN. Utilisation de la touche INFO 1. Appuyez sur la touche INFO de la télécommande en cours de lecture. 2. Appuyez sur les touches ▲▼ pour sélectionner langue audio. 3.
visionner un film SÉLECTIONNER LA LANGUE DE SOUS-TITRE Vous pouvez sélectionner rapidement et facilement la langue de sous-titrage appropriée à l’aide de la touche SUBTITLE. hAZ Utilisation de la touche SUBTITLE 1. Appuyez sur la touche SUBTITLE. La langue de soustitrage change à chaque fois que vous appuyez sur la touche. Les langues de sous-titrage sont indiquées par leur abréviation. Sous-titre ENG 2. Pour enlever l’icône SUBTITLE, appuyez sur la touche CANCEL ou RETURN.
CHANGEMENT DE L’ANGLE DE CAMÉRA Lorsqu’un BD/HD DVD/DVD contient plusieurs angles pour une scène donnée, vous pouvez utiliser la fonction ANGLE. hAZ Utilisation de la fonction ANGLE 1. Appuyez sur la touche INFO de la télécommande en cours de lecture. BD Info Titre : 001/006 Chapitre : 003/016 ● VISIONNER UN FILM 2. Appuyez sur les touches ▲▼ pour sélectionner Angle. Durée de lect. : 00:11:14 Audio : ENG 5.1CH Sous-titre : ENG Angle : 01/01 § Chang. ¨ Dépla. 3.
écouter de la musique B LECTURE D’UN CD AUDIO (CD-DA) 1. Insérez un CD audio (CD-DA) dans le tiroir disque. CD audio – la première piste est lue automatiquement. 01/12 TRACK 001 CD ► 00:01:29 / 00:04:06 2. Pour vous déplacer vers la liste de fichiers musicaux, appuyez sur la touche STOP ou RETURN. L’écran Liste de fichiers musicaux s’affiche. a Mode Lecture 3. Appuyez sur les touches ▲▼ pour sélectionner la piste appropriée, puis appuyez sur ENTER. Vidéo TRACK 005 Musique TRACK 006 CD Param.
LES TOUCHES DE LA TÉLÉCOMMANDE UTILISÉES POUR LA LECTURE DE DISQUES CD AUDIO (CD-DA) 1. Touche SAUT ( ) : pour lire la piste suivante en mode de lecture. pour vous déplacer page par page dans la Liste de fichiers musicaux ou dans la Liste de lecture. 3. Flèches ▲▼ : Pour sélectionner une piste (chanson) de la Liste des fichiers musicaux ou de la Liste de lecture. 4. Touches COULEUR : ROUGE (A), VERTE (B), JAUNE (C) • Touche ROUGE (A) : pour sélectionner le mode Répéter en cours de lecture.
écouter de la musique Liste de lecture Permet de créer une liste de lecture contenant jusqu’à 99 pistes. Pour configurer, suivez les étapes 1 et 2 à la page 60. Vidéo 1. Appuyez sur la touche VERTE (B). TRACK 006 Musique 00:03:20 TRACK 007 CD 00:03:32 TRACK 008 00:04:36 TRACK 009 00:04:17 TRACK 010 00:04:11 TRACK 011 00:04:07 TRACK 012 00:04:46 Param. b Liste de lecture Original 2.
dépannage Avant de contacter le centre de service technique, effectuez les vérifications élémentaires suivantes : Problème Solution • Vérifiez les piles dans la télécommande. Il peut s’avérer nécessaire de les remplacer. • Utilisez la télécommande à une distance inférieure à 6 mètres (20 pi). • Retirez les piles et maintenez enfoncée(s) une ou plusieurs touches pendant plusieurs minutes pour purger le microprocesseur à l’intérieur de la télécommande et le réinitialiser.
Problème Solution Aucun son. • Assurez-vous d’avoir sélectionné la sortie numérique appropriée dans le menu Audio Setup (Configuration audio). L’écran est bloqué • Retirez le disque et appuyez sur la touche (sur le panneau avant) pendant plus de 5 secondes. Tous les réglages retournent aux réglages du manufacturier. Si la sortie HDMI est définie sur une résolution que votre téléviseur ne peut accueillir (ex. : 1080p), il se peut que l'image n'apparaisse pas à l'écran.
appendice CARACTÉRISTIQUES TECHNIQUES CA 120V, 60Hz Consommation électrique 42 W Poids 9,3 Ibs Dimensions 16,9 (L) x 12,8 (P) x 3,1 (H) po : 42,97 (L) X 32, 51 (P) X 7,87 (H) cm Plage de températures de fonctionnement De + 41° F à + 95° F Plage d’humidité de fonctionnement De 10 % à 75 % BD (disques BD/HD DVD) Vitesse de lecture : 4,917 m/s HD DVD DVD (disque Digital Versatile (numérique polyvalent)) Disques CD : 5 po (DISQUES COMPACTS) Vitesse de lecture : 6.61 m/s Vitesse de lecture : 3.
PROTECTION CONTRE LA COPIE COPY PROTECTION • En fonction des lois sur les droits d’auteur des ÉtatsUnis et d’autres pays, la copie non autorisée, l’utilisation. la distribution ou la modification d’émissions de télévision ou de cassettes vidéo, de supports BD, HD DVD, DVD, CD et d’autre matériel peut mener à des responsabilités civiles et / ou criminelles. • Plusieurs disques BD/HD DVD/DVD sont encodés avec une protection contre la copie.
GARANTIE LIMITEE A L’ACHETEUR INITIAL Samsung Electronics Canada Inc. (SECA) garantit ce produit contre tout défaut de fabrication. SECA garantit aussi que si cet appareil ne fonctionne pas convenablement durant la période de garantie SECA se réservera le droit de réparer ou de remplacer l’appareil défectueux. Toutes les réparations sous garantie doivent être effectuées par un Centre de service autorisé SECA.
Contacter SAMSUNG À TRAVERS LE MONDE Si vous avez des questions ou commentaires concernant les produits Samsung, veuillez communiquer avec le service à la clientèle SAMSUNG. Région North America Latin America Pays CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP. DOMINICA 1-800-SAMSUNG(726-7864) www.samsung.