User Guide
Contents Chapter 1. Getting Started 3 6 18 21 27 Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off Chapter 2. Using Windows 8 30 31 33 35 38 39 What is Microsoft Windows 8? Screen At a Glance Using the Charms Using Apps Windows Hot Key Function Using a Touch Screen (Touch screen models only) Chapter 3.
Chapter 1.
Before You Start Before reading the User Guide, first check the following information. Chapter 1 Getting Started Using the software •• From the Start Screen, right-click any area and select All •• Optional items, some devices and software referred to in the User Guide may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Guide may not be the same as your own environment.
Before You Start Chapter 1 Getting Started Safety Precaution Notations Icon 4 Copyright Notation Description Warning Failure to follow instructions marked with this symbol, may cause personal injury and or fatality. Caution Failure to follow instructions marked with this symbol, may cause slight injury to yourself or damage your property. © 2012 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual.
Before You Start About the Product Capacity Representation Standard About the capacity representation of the storage The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation. (E.g.
Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung Computers, some pictures may differ from actual products. Chapter 1 Getting Started 6 Do not install the computer on a slant or a place prone to vibrations, or avoid using the computer in that location for a long time. This increases the risk that a malfunction or damage to the product will occur.
Safety Precautions Chapter 1 Getting Started Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model. Do not touch the main plug or power cord with wet hands. G 7 If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center.
Safety Precautions Warning Chapter 1 Getting Started 8 AC Adapter Usage Precautions Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Connect the power cord to an outlet or multiple power plug (extended cable) with a ground terminal. Failure to do so may result in electric shock. When the power supply is ungrounded, the current may leak resulting in electric shock.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Battery Usage Related Please charge the battery fully before using the computer for the first time. Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. There is a danger of electric shock or choking. Use an authorized battery and AC adapter only. Please use an authorized battery and adapter approved by Samsung Electronics.
Safety Precautions Warning Chapter 1 Getting Started 10 Usage Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Never heat the product(or battery) or put the product(or battery) into a fire. Do not put or use the product(or battery) in a hot location such as a sauna, inside a vehicle exposed to the heat, and so on. There is a danger of an explosion or fire.
Safety Precautions Warning Chapter 1 Getting Started 11 Upgrade Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Avoid direct sunlight when the computer is in an air-tight location such as inside a vehicle. There is a danger of a fire hazard. The computer may overheat and also present opportunity to thieves. Do not use your computer for long periods of time while any part of your body is making direct contact with it.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Security and Movement Related Follow the instructions for the relevant location (e.g. airplane, hospital, etc.) when using a wireless communication device (wireless LAN, Bluetooth, etc.). Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 13 Battery Usage Related Dispose of worn-out batteries properly. •• There is a danger of fire or explosion. Installation Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Damage to a component within the computer may cause electric shock or fire.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Usage Related Do not place a candle, light cigar, etc. over or on the product. There is a danger of fire. Use a wall outlet or multi-plug with a grounding part. Chapter 1 Getting Started 14 Connect only permitted devices to the connectors or ports of the computer. Failure to do so, may cause electric shock and fire.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 15 Do not place your face close to the Optical Disk Drive tray when it is operating. There is a danger of injury due to an abrupt ejection. Check CDs for cracks and damage prior to use. If the computer emits smoke, or there is a burning smell, disconnect the power plug from the wall outlet and contact a service center immediately.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Upgrade Related Take care when touching the product or parts. The device may be damaged or you may be injured. Take care not to throw or drop a computer part or device. Chapter 1 Getting Started Security and Movement Related When moving the product, turn the power off and separate all connected cables first. The product might be damaged or users may trip over the cables.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Cautions on Preventing Data Loss (Hard Disk Management) Take care not to damage the data on a hard disk drive. •• A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk.
Proper Posture During Computer Use Chapter 1 Getting Started 18 Maintaining a proper posture during computer use is very important to prevent physical harm. •• Do not use the computer while you are lying down, but only while you are sitting down. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. •• Do not use the computer on your lap.
Proper Posture During Computer Use Chapter 1 Getting Started Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least 50cm. Keep your arm at a right angle as shown by the figure. •• Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. •• Avoid setting the monitor and LCD excessively bright. •• Keep the monitor and LCD screen clean. •• If you wear glasses, clean them before using the computer.
Proper Posture During Computer Use Chapter 1 Getting Started 20 Volume Control (Headphones and Speakers) Use Time (Break Time) Check your volume first to listen to music. •• Take a break for 10 minutes or more after a 50-minute period when working for more than one hour. Illumination •• Do not use the computer in dark locations. The illumination level for computer use must be as bright so for reading a book. Check your volume! •• Check if the volume is too loud before using headphones.
Overview Chapter 1 Getting Started Front View 1 •• The pictures used for the cover and the main body in the User Manual are those of the representative model of each series. Therefore the colors and appearance of the pictures may differ from the actual appearance of the product depending on the model. Camera operating indicator 2 Camera •• The actual color and appearance of the computer may differ from the pictures used in this guide.
Overview Chapter 1 Getting Started Touch buttons (for corresponding models only) 3 •• Some touch buttons may not be provided depending on the model specifications. •• Menu, Screen Settings, Volume Control buttons are only supported in Monitor Mode. If you touch the sensor, the touch button works. 4 1 1 2 Mute Eject CD 2 3 4 5 6 7 This is the button to mute the sound. Eject the media from the CD drive. Menu 22 Shows or hides the screen settings OSD.
Overview 5 6 7 Chapter 1 Getting Started Launches the volume control menu. When the volume control menu is running, to turn the volume up or press Volume Control press to turn the volume down. Switches to PC mode or monitor mode. PC Mode: The mode that maintains the screen of this product. Monitor Mode: The mode used when this Mode Selection product is used as a monitor. Source is used to switch between PC and Monitor modes when the system is in use. LCD On/Off Turns the LCD on or off.
Overview Chapter 1 Getting Started 24 Right View Plays CD or DVD titles. 1 1 CD Drive (ODD) (Optional) A CD Drive is optional. The installed drive may di er depending on the model specifications.
Overview Chapter 1 Getting Started Left View 1 Multi Card Slot 25 A card slot supports multi cards. This port is used as a USB port or chargeable USB port. 1 1 USB Port or 2 Chargeable USB Port (Optional) 2 3 4 3 4 What is a chargeable USB port? •• USB device accessing and charging functions are supported. •• The USB charging function is supported regardless of whether the power is turned on or off. •• Charging a device through a chargeable USB port may take longer than general charging.
Overview Chapter 1 Getting Started Rear View 3 (12x12cm) You can mount the monitor on the wall by removing the stand and purchasing and attaching a Vesa bracket (optional). Check the projected parts on the sides and back of the product to maintain a sufficient space from the wall. 4 Speaker A device used to generate sound. Vesa bracket hall 1 2 3 26 TV Antenna Input 5 Port (Optional) You can watch TV by connecting the antenna cable. nly for models with a TV tuner card.
Turning the Computer On and Off Chapter 1 Getting Started 27 Turning the computer on 1 About Windows Activation Connect the AC adapter. When you turn the computer on for the first time, the Windows activation screen appears. Follow the activation procedures according to the instructions on the screen to use the computer.
검색 Turning the Computer On and Off Chapter 1 Getting Started 28 공유 Turning the computer off •• Since the procedures to turn the computer off may differ depending on the installed operating system, please turn the computer off according to the procedures for the purchased operating system. •• Save all your data before clicking on Shut down. 1 시작 The Charms menu appears when you place your mouse pointer at the edge of the top or bottom right of the screen.
Chapter 2.
What is Microsoft Windows 8? Chapter 2 Using Windows 8 Microsoft Windows 8 (hereafter referred to as Windows) is an operating system that is required for operating a computer. 30 Searching for Help To use your computer optimally, you need to know how to use it properly. Therefore, It is better to learn how to use Windows by utilizing Windows Help and Support. •• The screen may appear somewhat different depending on the model and the operating system.
Screen At a Glance Chapter 2 Using Windows 8 Windows 8 provides both the new Start screen mode and the Desktop mode of the existing OS. Start Screen Start Screen When you turn on the computer, the Start screen is displayed, which allows you to use the applications (Application, App, hereafter referred to as an App) at the same location. 2 3 4 5 6 7 Refers to the default Start screen of Windows 8. 2 App Refers to the apps that are currently installed.
Screen At a Glance Chapter 2 Using Windows 8 Desktop This provides similar functions to those provided by the Desktop in prior Windows versions. 1 2 3 2 4 1 2 3 4 Desktop Displaying the Charms Charms Refers to the Desktop. The Charms is hidden at the right of the screen. Place your mouse pointer at the edge of the top or bottom right of the screen to display the Charms. This refers to the menu that allows you to use functions such as Search, Share, Start, Device and Settings.
Using the Charms Chapter 2 Using Windows 8 The Charms is a new type of menu that combines the Start menu with the Control Panel of existing Windows. The Charms allows you to quickly configure the device(s) connected to your computer, search for App(s)/file(s), and use the sharing function, etc. Search Search Search Share Share Share Activating the Charms If you move your mouse pointer to the top or bottom right corner of the screen, the Charms appears.
Using the Charms Chapter 2 Using Windows 8 34 Changing the Settings Frequently used Windows menus are collected. Icon Name Function Description Wireless Network You can connect to a wireless network. Select a wireless network to connect to. Adjusting the Volume You can adjust the volume or mute the sound. Click the Charms > Settings. 한 한 Notice You can set the interval at which an App sends notices. Power You can turn off your computer or select the Power Options.
Using Apps Chapter 2 Using Windows 8 An App refers to an application program (hereafter referred to as an App). In a larger sense, it refers to all the software programs installed on the operating system. Windows 8 provides basic Apps for frequently performed tasks. Starting/Exiting an App Click on an App in the Start screen to activate it. To exit the App 1 2 Move your mouse pointer to the top of the screen. Your mouse pointer changes to a hand shape.
Using Apps Chapter 2 Using Windows 8 Running Two Apps at the Same Time Adding/Removing an App to/from the Start Screen 1 2 Move your mouse pointer to the top of the screen. Your mouse pointer changes to a hand shape. Click Start screen > right-click your mouse button. Click All Apps at the bottom of the screen to display all the Apps that are currently installed. 3 If you click and hold your mouse button and move left or right, you can split the screen to display multiple Apps.
Using Apps Using the Windows Store If you run the App Store in the Start screen, the Apps in the Windows Store are displayed. However, a Microsoft account is required to purchase App(s) in the Windows Store. Continue after registering your Microsoft Account in the Charms. Chapter 2 Using Windows 8 Configuring your Microsoft Account A Microsoft Account allows you to synchronize your settings with other device(s) running Windows 8 online allowing you to share file(s) or settings.
Windows Hot Key Function You can use the following convenient hot keys in Windows 8. Function Hot Keys Function Description Displaying the Start Screen Windows Key Displaying the Desktop Windows Key + D Switches to Desktop mode. Running the Charms Windows Key + C Activates the Charms. Locking the Screen Windows Key + L Locks the screen. Opening the Ease of Access Center Windows Key + U Opens the Ease of Access Center configuration.
Using a Touch Screen (Touch screen models only) Chapter 2 Using Windows 8 39 A touch screens allows you to use your computer without a keyboard or mouse. The touch screen instructions also describe the functions which can be activated via the touch screen. •• If you are using your computer for a long period of time, it is recommended using a keyboard and mouse. •• Make sure to operate your touch screen using your finger. If you operate your touch screen with a hard object, it will not work.
Using a Touch Screen (Touch screen models only) Touch Operation Dragging from the left edge toward the center Dragging from the bottom edge upward or from the top edge downward Touching slightly (Clicking) Touching twice (Double-clicking) Touching and dragging Chapter 2 Using Windows 8 40 Function Description Displays the last run App. Displays the options for the currently running application. Slightly press with your finger to select an item.
Using a Touch Screen (Touch screen models only) Touch Operation Chapter 2 Using Windows 8 Function Description Rotating with more than 2 fingers Rotates the selected target. Spreading 2 fingers widely or Zooms in or out of the target. bringing them towards each other Touching and holding for a while (Right-clicking your mouse) Touching and dragging 2 fingers up/down, left/right (Scrolling) Provides the same function as right-clicking your mouse button.
Using a Touch Screen (Touch screen models only) Calibrating the Screen If you are using the touch screen for the first time or the pointer is not aiming correctly and the accuracy has declined, calibrate your screen. Chapter 2 Using Windows 8 2 When the Calibration window appears, press the + mark by following the onscreen instructions. 3 The input location of your touch screen is calibrated. The screen calibration process may differ depending on the OS.
Using a Touch Screen (Touch screen models only) Entering Characters 3 Chapter 2 Using Windows 8 On the Desktop, press the at the right of the taskbar to display the Tablet PC Input Panel. You can enter characters using the keyboard and the Tablet PC Input Panel. Entering characters may differ depending on the operating system and is not supported by some operating systems. If you are using your computer for a long period of time, it is recommended using the keyboard.
Using a Touch Screen (Touch screen models only) Chapter 2 Using Windows 8 44 Entering characters using the Touch keyboard Entering characters in Handwriting Mode The Touch keyboard has the standard keyboard layout which allows you to select keys to enter characters. You can enter characters by writing them in the Handwriting Mode Input Panel on the touch screen. 1 Press the Touch keyboard icon Panel. 1 Press the Handwriting Mode icon Panel. 2 Press the keys to enter your characters.
Using a Touch Screen (Touch screen models only) Note for Using the Touch Screen •• When using the touch screen, make sure to keep your hands clean and dry. In humid environments, dry off your hands and the surface of the touch screen before using the touch screen. •• Do not directly spray LCD display cleaner onto the touch screen. The cleaner may soak through the bottom of the touch screen. When using an LCD display cleaner, spray it onto a cloth to clean your touch screen.
Chapter 3.
Using a wireless keyboard/mouse (Optional) The wireless keyboard and mouse are optional and the appearance and the color of the provided keyboard and mouse may differ depending on the model. Chapter 3. Using the computer 47 2 Insert the wireless signal receiver into the USB 2.0 port at the back of the computer. 3 Slide the power switch at the bottom of the mouse to the ON position.
Using a wireless keyboard/mouse (Optional) 2 Wireless keyboard 1 Slide the z battery cover at the bottom of the keyboard from to the position and separate the x battery cover. z x Chapter 3. Using the computer 48 Insert the batteries and then close the battery cover. z x c z •• Be sure to confirm that the polarities (+ / -) of the batteries are correct. •• Do not recharge the batteries (AAA type) supplied with the product.
Using a wireless keyboard/mouse (Optional) Battery replacement LED This indicates when it is time to replace the battery. If the LED blinks, replace the batteries. Chapter 3. Using the computer Caps Lock Indicator If the indicator is turned on, letters are capitalized. Windows Key In Windows 8, the Start screen appears. Directional keys Moves the cursor up, down, left or right.
Using a wireless keyboard/mouse (Optional) Chapter 3. Using the computer 50 검색 검색 Windows 8 Charm Menu Key (This function is only supported for Windows 8.) Search Runs the Search function in the Windows 8 menu. Share Runs the Share function in the Windows 8 menu. Device Launches the Device function in the Windows 8 menu. 공유 검색 공유 시작 시작 공유 장치 장치 시작 Settings Launches the Settings in the Windows 8 menu.
Using a wireless keyboard/mouse (Optional) Briefly press the left mouse button once. Wheel button Moves the pointer up and down. Right button Selects and launches an item. 51 Click function Wireless keyboard Left button Chapter 3. Using the computer Shows the contextsensitive menus of programs. If you click this mouse button once, the corresponding program is selected. Double-click function Quickly press the left mouse button twice. The corresponding program is launched.
Using a wireless keyboard/mouse (Optional) 2 If the wireless keyboard does not work Chapter 3. Using the computer Within 30 seconds of reconnecting the receiver, press and hold the CONNECT button for 1 seconds near the receiver. ► Check the batteries. For the keyboard, check if the battery low indicator the top right blinks. at CONNECT button If the indicator blinks, you need to replace the battery. ► Check the status of the wireless signal receiver.
Using a wireless keyboard/mouse (Optional) If the wireless mouse does not work Chapter 3. Using the computer 53 2 Disconnect and then reconnect the wireless signal receiver to the main body. 3 Set the power switch at the bottom of the mouse to the ON position. 4 Within 30 seconds of reconnecting the receiver, press and hold the CONNECT button for 1 seconds near the receiver. 5 Check if the device works properly.
Using hand gestures (Optional) You can turn the pages on the screen, and run and exit programs using hand gestures in front of the computer screen. In addition, you can turn the volume up or down and zoom in or out the screen. 1 Chapter 3. Using the computer 2 The Hand Gesture window appears on the right side of the screen. Turning the volume on/off Help Close Run the hand gesture program (Gesture Control). From the Start Screen, right-click any area and select All apps in the bottom right corner.
Using hand gestures (Optional) 3 If you place your hand in front of the camera, your hand is recognized when the palm-shaped icon appears on the screen. The hand gesture function works within a 50cm~100cm range from the camera. Chapter 3. Using the computer 55 Tips •• This function only works when a hand icon appears on the small window on the right side of the screen. If the function doesn't work properly, please try to move your hand so that the hand icon appears in the window.
Using hand gestures (Optional) Chapter 3. Using the computer Try to run a function referring to the figure of the gesture below.
CD Drive (ODD, Optional) An optical disk drive is optional and may differ depending on your computer model. For detailed specifications, refer to the catalogue. •• Do not insert a cracked or scratched CD. Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed. •• When you clean a CD or DVD title, wipe with a soft cloth from inside to outside. •• Do not hold a CD by touching the bottom of the CD. Hold a CD by touching the center and the outer rim of the CD.
CD Drive (ODD, Optional) Chapter 3. Using the computer •• Do not pull or push the disc by force when the disc is being automatically ejected or inserted. This may cause a problem when ejecting or inserting a disc. •• To insert a disc, insert the disc into the center of the drive with the appropriate pressure. If you insert a disc and apply excessive force to one side of the tray, it may result in a problem.
Multi Card Slot (Optional) Using the multi card slot, you can read and write data to cards. You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera, digital camcorder, MP3, etc.. Chapter 3. Using the computer Using the card 1 Insert the card into the multi card slot in the indicated direction.
Multi Card Slot (Optional) 2 The following message appears on the top right. Click to open the folder and click View Files. Chapter 3. Using the computer 60 To format a memory card When using the memory card for the first time, you must format the card before using it. Formatting a card deletes all data saved on the card. If the card includes data, backup the data before formatting it. If a message appears to notify you of any problem, click the corresponding window > Continue without Scanning.
Using the product as a monitor (Optional) The LCD screen of this product can be used as a monitor using the Digital Video/Audio Input Port (HDMI-IN). Try using this product as a monitor by connecting an HDMI device such as a computer, gaming console, DVD player and so on. Chapter 3. Using the computer 61 You can only use monitor mode by connecting the Digital Video/Audio Input Port (HDMI-IN). The Digital Video/Audio Out Port (HDMI-OUT) is for output only.
Adjusting the Volume Chapter 3. Using the computer 검색 62 공유 You can control the volume with the volume control program. 시작 Adjusting the Volume using the Volume Adjustment Program 장치 Click the Charms menu > Settings bar. > Using SoundAlive (Optional) The SoundAlive function enables you to experience more stereophonic sound using stereo speakers. •• SoundAlive is only supported in Windows 8. 검색 to adjust the control •• The software programs provider may vary, depending on your computer model.
LCD Instruction Samsung Computer’s Defective LCD pixel management standard Although Samsung Electronics, Co., Ltd. observes strict quality and confidence specifications for LCD manufacturing, the company must inevitably allow a few defective cells in panels due to a technological limitation of the manufacturing process.
시작 Wired Network Chapter 3. Using the computer 64 장치 A wired network is a network environment used for a company network or broadband internet connection at home. 2 •• Since these descriptions are written on the basis of the latest operating system, Windows 8, some of the content and the figures of the descriptions may differ depending on the operating system. Since the procedures for other Windows operating systems are similar, use the computer referring to these descriptions.
Wired Network 4 Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties. Chapter 3. Using the computer 5 •• The Network Component name may differ depending on the Operating System Installed. •• To add a network component, click Install in the screen shown in the figure above. You can add clients, services, and protocols. 65 Configure the IP settings. When using DHCP, select Obtain an IP address automatically.
Wired Network 검색 Chapter 3. Using the computer 66 공유 Using the WOL (Wake On LAN) function is a function that activates the system시작from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN). - < Wake On LAN> feature may not work while using Hybrid power saving feature. Hybrid sleep mode can be disabled from Power Options under Control Panel.
Wireless Network (Optional) A wireless network (Wireless LAN) environment is a network environment that enables communicating between multiple computers at home or a small-size office through wireless LAN devices. Chapter 3. Using the computer 67 •• The screen figures and terms may differ depending on the model. •• Depending on the program version, some functions may not be provided or different functions may be provided.
검색 Wireless Network (Optional) Chapter 3. Using the computer 68 공유 Connecting to a Wireless LAN 시작 2 If there is an AP, you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows. Click Connect. If a network key is set for the AP, enter the network key and then click OK. 장치 1 For the network key, please ask your network administrator. If you click the Charms menu > Settings > Network Connections icon, a list of available APs설정appears.
Using the TV (Optional) Products embedded with a TV tuner card (Optional) can use the TV function. Chapter 3. Using the computer Configuring the TV After connecting to the antenna, you can watch TV by using the corresponding TV program. You can only use the TV function when the TV tuner card (Optional) is installed. Connecting the TV Antenna You must connect the TV tuner card (Optional) to the TV antenna. Connect the antenna cable to the TV antenna input port.
Using the TV (Optional) Chapter 3. Using the computer 70 Note on Configuration •• The setup procedures may differ depending on the current type of your TV service. •• You should set the product to the region and postal code where your computer is currently installed. •• If the TV signal provider setup screen appears, select the correct provider. If the configured provider is not correct, not all of the channels will be received or the TV picture quality may be degraded.
Using the TV (Optional) Chapter 3. Using the computer TV Program Menu Exit Maximize Minimize Live TV You can watch a currently broadcast TV program. Recorded TV You can watch a recorded TV program. EPG (Electronic Program Guide) Schedule Live TV Recorded TV Settings EPG (Electronic Program Guide) [Home] 71 An electronic TV program guide which allows you to watch digital TV broadcasts. However, it may differ depending on the corresponding station and the reception.
Using the TV (Optional) Watching TV 1 2 Start the TV program (ArcSoft TV). Chapter 3. Using the computer 72 Move your mouse to display the control bar as follows. Then select a function. Select Digital TV or Analog TV Select Live TV from the menu. The TV broadcast is displayed immediately. Switch to the channel you want.
Using the TV (Optional) Recording TV You can record a TV program on your computer. Recording the current program Move your mouse over the currently viewed screen. When the control bar appears at the bottom, click Record . A red dot appears indicating that a recording is in progress and the recording begins. Chapter 3. Using the computer Creating a recording schedule 1 2 Click Home > Settings > Schedule > Add. Set your program and the reservation time.
Using the TV (Optional) •• Even when the computer is in power-saving (sleep) mode, if the recording reservation time is reached, the TV automatically wakes up from power-saving mode and performs the reserved recording. When the computer is in hibernation mode, recording reservations will not work. Chapter 3. Using the computer 74 Playing a recorded program Click Home > Recorded TV. The recorded programs are displayed. Select a program to watch.
Using the Remote Control (Optional) You can use the TV functions with the remote control. You can run the Live TV program from the desktop. Check the functions of each button. •• The appearance of the remote control may differ from the actual one. Some functions may not be provided depending on the system. •• Use your remote control by pointing it toward the remote control receiver. Chapter 3.
Using the Remote Control (Optional) Wake Up From Sleep Mode (Start Windows) Chapter 3. Using the computer Sleep Mode Launches Internet Explorer Mute Volume Controls Stop TV or Spacebar function (optional): You can run the TV program from the desktop.
Using the Multimedia App (Optional) You can enjoy photo, video and music files with the S Camera, S Gallery and S Player apps. S Camera You can take photos and record videos with the S Camera app, and view them directly in this app. S Gallery Only photos or videos recorded with the S Camera app can be viewed with the S Camera app. S Player You can view the photo, video and music files saved on the computer.
Using the Multimedia App (Optional) Chapter 3. Using the computer 78 검색 2 Using the S Camera app 공유 1 Tap Charm menu > Start To make a video recording, slide the camera mode bar to the Video position. > S Camera. 시작 Camera mode (Photo To take a picture, slide the camera mode bar into the Photo position. , Video ) 장치 3 4 설정 Tap on Take a picture/Record a video to take a picture or record a video. You can view the picture or video using the Picture preview or S Gallery app.
Using the Multimedia App (Optional) Chapter 3. Using the computer 검색 Editing a photo Using the S Gallery app 공유 1 2 Tap Charm menu > Start > S Gallery. 시작 You can view the pictures and videos taken by the S Camera. 장치 In addition, you can apply special effects to the pictures using the photo editing function. 설정 You can take a picture in the S Gallery app by tapping the Camera icon. 1 Select Picture preview. Drag it upward slightly from the bottom center.
Using the Multimedia App (Optional) Chapter 3. Using the computer 검색 2 Select an effect to be applied to the photo. Using the S Player app 공유 E.g. If you select Draw Line preview Color Undo 1 Tap Charm menu > Start > S Player. 시작 My Music 장치 My Videos My Photos 설정 Erase/Draw Line thickness Save Close Frame Draw Stamp Music playlist 2 Slideshow My photo list Select a menu to enjoy photo, video and music files. Some files may not be played depending on their format.
Samsung Software Update SW Update is a software program that searches for Samsung software programs and drivers installed when you purchased the computer and helps you update any drivers or programs. Chapter 3. Using the computer 3 The SW Update program runs. Select the items that you want to update before proceeding with the update process. •• You can check updatable files before performing the update only when you are connected to the internet.
Diagnosing the Computer Status and Troubleshooting The Support Center program, which is Samsung’s computer’s troubleshooting guide, supports diagnosing the system and has a FAQ for frequently occurring problem(s). 2 1 Then, click Support Center. 82 Support Center is activated and starts diagnosing your computer. After the diagnosing process is finished, the System Status menu displays a list of the current problems to be solved as shown.
Using the Security Slot You can secure the computer by connecting a lock and cable to the Security Slot. To use this feature, you have to purchase the lock and cable additionally. To use the lock and cable, refer to the product manual. Tie the lock and cable to a fixed object and install the other end of the cable to the security slot. Chapter 3.
Chapter 4.
BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. •• Use the BIOS setup to define a boot password, change the booting priority, or add a new device. •• Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. •• The functions of the BIOS setup are subject to change for product function enhancement purposes. •• The BIOS Setup menus and items may differ depending on your computer model. Chapter 4.
BIOS Setup Chapter 4. Settings and Upgrade 86 The BIOS Setup Screen The BIOS Setup menus and items may differ depending on your computer model.
BIOS Setup Chapter 4. Settings and Upgrade 87 System Setup Keys In the Setup, you have to use the keyboard. F1 Up & Down Keys Enter Press to select an item or to enter a sub menu. F10 Press to save the changes and exit Setup. Press to view the Setup Help. Press to move up and down. The keyboard image may differ from the actual keyboard. F5/F6 Press to change the item value. F9 Press to load the default Setup settings. ESC Press to return to a higher level menu or to move to the Exit menu.
Setting a Boot Password If you set a password, you have to enter the password when you turn the computer on or enter the BIOS Setup. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. Chapter 4. Settings and Upgrade 1 2 88 Select the Security menu in the BIOS Setup. In the Set Supervisor Password item, press .
Setting a Boot Password Setting a User Password Using the User Password, you can turn the computer on but you cannot change the major settings of the BIOS Setup because you cannot enter the BIOS Setup. Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password. In the Set User Password item, press and complete the procedures from Step 3 of Setting a Supervisor Password. Chapter 4.
Setting a Boot Password Deactivating the Password 1 Press on the password to be deactivated. For example, to deactivate a supervisor password in the Set Supervisor Password item, press . To deactivate the hard disk drive password completely, you must restart the system. 2 In the Enter Current Password item, enter the currently configured password and press . 3 Leave the Enter New Password item field empty, and press .
Changing the Boot Priority You can change the boot priority in the BIOS Setup. 1 2 Chapter 4. Settings and Upgrade 3 Press on the Boot Option #1 item. Select the drive to boot from. Select the Boot menu in the BIOS Setup. BIOS Setup Boot Press on the Set Boot Order item.
Chapter 5.
Recovering/Backing up the Computer (Optional) If a problem occurs with your computer, Recovery (recovery program) allows you to easily restore your computer to the default (factory) settings. Alternatively, you can back up your computer so that you can restore it to your preferred state at any time. 93 •• Recovery may not be provided or may be a different version depending on the model. •• For models whose hard disk or SSD capacity is less than 64 GB, the Recovery program is not provided.
Recovering/Backing up the Computer (Optional) Chapter 5. Troubleshooting 94 Recovering You can recover your computer to the default (factory) status when your computer does not boot up. Factory Default Point 1 Restores your computer to the factory default status. - If Windows does not start T urn your computer on and press the F4 key. Run recovery mode. User's Backup Point - If Windows is running Restores your computer to a previously backed up status.
Recovering/Backing up the Computer (Optional) Chapter 5. Troubleshooting 95 Recovering after a Backup You can recover your computer after you have backed up your computer to a separate drive or external storage device. Backing up 1 2 Select the drive to save to. To back up your computer to an external storage device, connect the external storage device and select the relevant drive. Click Backup in the Recovery Home screen. Select the drive to save and click Backup. You cannot select a DVD drive.
Recovering/Backing up the Computer (Optional) Recovering You can recover your computer using the backup from the above process. 1 If the backup image is saved to an external storage device, connect the device. 2 Start Recovery and click Recover. 3 Select a Recover Option and click Recover. Select a point to recover. 4 Chapter 5. Troubleshooting 96 The recover is performed based on the screen instructions. You can use your computer after the recover is completed.
Recovering/Backing up the Computer (Optional) Chapter 5. Troubleshooting 97 To copy the external storage disk When you replace a storage device such as the HDD, SSD, etc. (hereafter referred to as a hard disk) built into your computer, you can move your existing data to the new storage device easily and safely. The new storage device must have sufficient capacity to save your existing data. You need to purchase an external hard USB connector separately to connect the hard disk and your computer.
Recovering/Backing up the Computer (Optional) Export Disk Image Function If you frequently recover your computer to the default (factory) settings, you can conveniently recover your computer after exporting the default (factory) status disk image to an external storage device. 1 Connect the external storage device, and then select a drive to save to. 2 Click Run.
Recovering/Backing up the Computer (Optional) Computer Recovery Function in Windows 8 1 Click the Charms menu > Settings > Change PC Settings > General. 2 Click the Start button for PC Recovery or Remove All Items and Reinstall Windows. PC Recovery If your PC does not work properly, you can restore your PC while keeping your media files such as your photo, video and music files, etc. as well as your personal documents.
Reinstalling Windows (Optional) You can reinstall Windows using the SYSTEM RECOVERY MEDIA for Windows when Windows is no longer working properly. (For models supplied with a SYSTEM RECOVERY MEDIA.) These descriptions are for Windows 7/8 and Windows Vista and for supported models only. •• A SYSTEM RECOVERY MEDIA may not be supplied depending on your computer model. Chapter 5.
Reinstalling Windows (Optional) 4 The following window appears, select an installation option. If you click Custom, the procedures from Step 5 continue sequentially. If you click Upgrade, the procedures from Step 6 continue sequentially. Chapter 5. Troubleshooting 5 •• Upgrade Select this option to Upgrade Windows while maintaining current files, configurations and programs.
Reinstalling Windows (Optional) Chapter 5. Troubleshooting Reinstalling when Windows does not start When Windows does not start, boot up with the SYSTEM RECOVERY MEDIA and from there you can reinstall Windows. 1 Insert the SYSTEM RECOVERY MEDIA into the DVD drive and restart the computer. 2 If the Press any key to boot from CD or DVD... message appears while booting, press any key on the keyboard. 3 4 For Windows 7/8, this screen may not appear depending on the version.
Q&A Chapter 5. Troubleshooting You can look for potential problems that may occur with the system and view the relevant solutions. Also, you may look up any reference(s) required while operating the computer. than the actual capacity because some programs occupy a certain area of the HDD outside of Windows.
Q&A Chapter 5. Troubleshooting 104 Windows 8 Related Q1 A I cannot find the Start button on the Desktop. There's no Start button in Windows 8. Q4 A You can use the Control Panel, PC-running menu(s), etc. by activating the Charms menu. Q2 A A Currently, there is no way to set the Desktop to appear by default. Press the Windows key + D key simultaneously to reveal the Desktop when the Start screen appears. This is currently the only workaround. I cannot find the computer's Shutdown button.
Q&A Q7 A How can I change the screen settings, environment settings, type size, color, and so on? Click Charms menu > Settings > Change PC Settings > Personalization. You can set the OS settings such as the screen design, etc. To configure your computer in detail, click the Charms menu in Desktop > Settings > Control Panel. You can configure your computer in the same way as existing Windows systems. Q8 A Active X does not run in Internet Explorer on the Start screen.
Chapter 6.
Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal injury and damage to your system.
Important Safety Information Chapter 6 Appendix 108 Care During Use The Instruction On Safety Operation of NotePC •• Do not walk on the power cord or allow anything to rest on it. 1. When installing and operating devices please refer to safety requirements in the user guide. •• Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. •• Some products have a replaceable CMOS battery on the system board.
Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas.
Replacement Parts and Accessories Connect and Disconnect the AC adapter The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not unplug the power cord by pulling the cable only. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment.
Regulatory Compliance Statements Wireless Guidance (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
Regulatory Compliance Statements • Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. • Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information.
Regulatory Compliance Statements Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network.
Regulatory Compliance Statements If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices.
Regulatory Compliance Statements Health and safety information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Chapter 6 Appendix 115 SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Regulatory Compliance Statements FCC Part 68 (If fitted with a modem device.) This equipment complies with part of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. This equipment uses the following USOC jacks : RJ11C An FCC compliant telephone cord and modular plug is provided with this equipment.
Regulatory Compliance Statements Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada.
Regulatory Compliance Statements When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands.
Regulatory Compliance Statements Son utilisation est soumise aux deux conditions suivantes : 1) ce dispositif ne peut pas provoquer d’interférences nuisibles et 2 2) ce dispositif doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer des anomalies dans le système. Afin de prévenir des interférences de radio au service autorisé, ce dispositif est prévu pour être utilisé à l’intérieur et éloigné des fenêtres pour fournir une protection maximum.
Regulatory Compliance Statements To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself. Contact the appropriate inspection authority or an electrician, as appropriate. The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
Regulatory Compliance Statements Brazil Chapter 6 Appendix 121 European Directives Este produto esta homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolucao 242/2000, e atende aos requisitos tecnicos aplicados.
Regulatory Compliance Statements European Radio Approval Information (for products fitted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz band, may be present (embedded) in your notebook system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Regulatory Compliance Statements Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente Samsung déclare que l’appareil Notebook PC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Regulatory Compliance Statements Íslenska [Icelandic] Hér með lýsir Samsung yfir því að Notebook PC er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Samsung erklærer herved at utstyret Notebook Norsk PC er i samsvar med de grunnleggende krav og [Norwegian] øvrige relevante krav i direktiv 1999/5/EF. Türkiye [Türkçe] Bu belge ile, Samsung bu Notebook PC’nin 1999/5/EC Yönetmeliğinin temel gerekliliklerine ve ilgili hükümlerine uygun olduğunu beyan eder.
Regulatory Compliance Statements Chapter 6 Appendix The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows: France General 2.400 - 2.454 GHz (channels 1 to 7) for outdoor use. European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz.
Regulatory Compliance Statements European Telecommunication Information (for products fitted with EU-approved modems) Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999/5/ EC.
WEEE Symbol Information Correct disposal of this product (Waste Electrical & Electronic Equipment) Chapter 6 Appendix 127 Correct disposal of batteries in this product Pb (Applicable in countries with separate collection systems) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
Samsung Packaging Take-Back Program In partnering with select recyclers, Samsung offers packaging take-back at no cost to you. Simply call the following number for the locations nearest you. CRT Processing, LLC (877) 278-0799 Kathy Severson – Logistics contact Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
Product Specifications The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalogue.
Product Specifications Registered Trademarks Chapter 6 Appendix ENERGY STAR® Partner As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Samsung is a registered trademark of Samsung Co., Ltd. Intel, Core™ i5/i3 are registered trademarks of the Intel Corporation. Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation.
Glossary Chapter 6 Appendix 131 The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup DHCP (Dynamic Host Configuration Protocol) A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. This refers to automatically allocating IP addresses to the users on the network by the network administrators.
Glossary Chapter 6 Appendix 132 DVD (Digital Versatile Disk) Icon DVD was developed to replace CD (compact disk). Although the shape and size of the disc are the same as that of a CD, the capacity of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD video is digital unlike VHS (analog) video and supports MPEG2 compression and digital audio. To play a DVD, a DVD drive is required. This refers to a small image that represents a file that users can use.
Glossary Chapter 6 Appendix 133 Network Protocol A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. The biggest network is the Internet, a worldwide network. A protocol is a set of rules used by computers to communicate with each other across a network.
Glossary Chapter 6 Appendix Shared Folder USB (Universal Serial Bus) A folder that can be used by other users on the network. This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS/2. Sleep Mode A power mode that enables computers to save power consumption when they are not being used. When a computer is in Sleep Mode, the data on the computer memory is not saved to the hard disk.
Index Chapter 6 Appendix A AP O 67 B Overview T 21 P BIOS Setup 85 Password Booting Priority 91 Product Specifications C 57 Click 51 D Recovery 88 129 93 6 Double-Click 51 Scroll 51 Drag 51 Supervisor Password 88 Support Center 82 SW Update 81 M Multi Card Slot 59 User Password 22 89 V Volume Control S Safety Precautions Touch button U R CD Drive 135 62 W Wired Network 64 Wireless Network 67
