Instruction manual

Page 5 of 100 Report No. 255837
TRF No. IEC60335_2_40F
Summary of testing:
5. This test report replaces the previous test report no. 241841 by following;
- Revision on the critical component list.
Refer to the Table 24.1 in main test report.
6. Heat exchanger of this appliance was tested and evaluated with the refrigerant R410A only in this test
report.
7. The appliance shall be provided with a certified supply cord and interconnection cords complying with the
national regulations of the countries in which the appliance is to be sold. The supply cord and
interconnection cords were evaluated just for the reference in this test report.
8. Information about other standards/ documents considered;
1) ISO 5149 (1993, edition:1);
Mechanical refrigerating systems used for cooling and heating – Safety requirements
2) ISO 13253 (2011, edition:2);
Ducted air-conditioners and air-to-air heat pumps -- Testing and rating for performance
3) ISO 15042 (2011, edition:1);
Multiple split-system air-conditioners and air-to-air heat pumps -- Testing and rating for performance
Summary of compliance with National Differences:
1) All CENELEC members as listed in the following standards;
EN 60335-2-40:2003 +A11:2004 +A12: 2005 +A1:2006 +A2:2009
EN 60335-1:2002 +A11:2004 +A1:2004 +A12:2006 +A2:2006 +A13:2008 +A14:2010 +A15:2011
EN 62233:2008
2) All CB members as listed in the IECEE Online Bulletin. All National differences listed in the CB Bulletin are
covered by the National Differences and Group Differences for Europe (Common Modifications, Special
National Conditions).
3) The product fulfils the requirements of the following standards;
IEC 60335-2-40: 2002 (Fourth edition) +A1:2005 +A2:2005
IEC 60335-1:2001 (Fourth ed.) (incl. Corr.1:2002) +A1:2004 +A2:2006 (incl. Corr. 1:2006)
EN 60335-2-40:2003 +A11:2004 +A12: 2005 +A1:2006 +A2:2009
EN 60335-1:2002 +A11:2004 +A1:2004 +A12:2006 +A2:2006 +A13:2008 +A14:2010 +A15:2011
EN 62233:2008