User manual

31
ENGLISH
Power supply and communication cable conguration
f Withdraw a main power cable and a grounding cable through the cable outlet on the right side of the DVM Hydro unit /
Hydro unit HT.
f When connecting external contact signal wire, connect them to the PCB terminal board through the cable outlets in the
right side of the outdoor unit.
f Wires must be installed after putting them in separate cable protection tubes.
f Fix a cable tube at the cable outlet using a CD connector.
Wired remote controller wiring
Main PCB
%7.)ZESPVOJUt0VUEPPSVOJU
communication cable
Cable protection tube
Conduit
Power cable terminal board
Power cable (Fix it to the clamp on
the bottom of the terminal board)
Main PCB
Control kit
Power cable Terminal board
Wired remote controller wiring
DVM Hydro unit HT+Outdoor unit
Communication cable
Cable protection tube
Conduit