OWNER’S INSTRUCTIONS Indoor unit Outdoor unit AM20A1E06A AM20A1E09A UM20A1E3A MULTI-SPLIT TYPE ROOM AIR CONDITIONER (Cool) E DB98-05094A(1)
Safety Precautions The following safety precautions must be taken when using your air conditioner. E-2 1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials over it. 2 NEVER spill liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your air conditioner and contact your installation specialist. 3 Do NOT insert anything between the air flow blades, as the inner fan may be damaged and you may be hurt.
Contents ◆ PREPARING YOUR AIR CONDITIONER ■ Safety Precautions ........................................................................................ ■ View of the Indoor Unit.................................................................................. ■ View of the Outdoor Unit ............................................................................... ■ Remote Control - Buttons and Display.......................................................... ■ Getting Started ..............................
View of the Indoor Unit ❄ The design and shape are subject to change according to the model.
Remote control - Buttons and Display Operating mode (AUTO, COOL, DRY, FAN) Remote control transmission indicator Battery discharge indicator Turbo mode Temperature settings Sleep mode Fan speed (AUTO, LOW, MEDIUM, HIGH) Air flow direction Time/Timer settings Temperature adjustment buttons Mode selection button (AUTO, COOL, DRY, FAN) On/Off button MODE TURBO OFF Off Timer adjustment button Turbo mode button Sleep timer button Air flow swing button Fan speed adjustment button Timer on/off buttons T
Getting Started You have just purchased a multi-split type room air conditioner and it has been installed by your installation specialist. Your Owner’s Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s features. The booklet is organised as follows.
Installing the Remote Control Holder on the Wall The remote control is supplied with a plastic holder that can be fitted to the wall to hold the remote control when you are not using it. To attach the holder to the wall, proceed as follows. 1 With a pencil, mark the positions of the two holes on the wall where the holder is to be installed. 2 Drill the two holes and insert plugs as required for the type of wall on which the holder is being installed. 3 Screw the holder into position.
Setting the Time Your air conditioner contains a clock used to start and stop the unit automatically at a given time. You must set the time when you: ◆ Purchase the air conditioner ◆ Replace the batteries Note Be sure to reset the time when you change clocks from standard todaylight savings time and vice versa. Setting the Time for the First Time 1 Insert the batteries. ◆ Push the battery cover on the rear of the remote control with your thumb and remove it.
Selecting the Automatic Operating Mode You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically. You can adjust the standard temperature but not the fan speed. 1 If necessary, press the Result: ◆ The OPERATION indicator on the indoor unit comes on. ◆ The air conditioner starts up in the mode selected when the unit was last used. ◆ The indoor unit beeps.
Cooling Your Room You must select the Cool mode if you wish to adjust the: ◆ Cooling temperature ◆ Fan speed when cooling 1 If necessary, press the Result: MODE TURBO OFF ◆ The OPERATION indicator on the indoor unit comes on. ◆ The air conditioner starts up in the mode selected when the unit was last used. ◆ The indoor unit beeps. IM IMPORTANT 2 (On/Off) button.
Changing the Room Temperature Quickly The Turbo cooling function is used to cool your room as quickly as possible. Example: You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the (On/Off) button. Result: ◆ The OPERATION indicator on the indoor unit comes on.
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press the Result: MODE TURBO OFF ◆ The OPERATION indicator on the indoor unit comes on. ◆ The air conditioner starts up in the mode selected when the unit was last used. ◆ The indoor unit beeps. IM IMPORTANT 2 (On/Off) button.
Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary, press the Result: (On/Off) button. ◆ The OPERATION indicator on the indoor unit comes on. ◆ The air conditioner starts up in the mode selected when the unit was last used. ◆ The indoor unit beeps. MODE 2 OFF If the indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.
Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the button under the remote control flap one or more times as required. Result: The outer blade is adjusted vertically. RECOMMENDATION When... Cooling Adjust the blade to face... Upwards.
Switching the Unit On and Off Automatically (On/Off Timer) You can set the timer to switch the air conditioner on and/or off automatically at given times. Example: You wish to start cooling your room before you return from work; you decide to: ◆ Switch the air conditioner on at 5:30 p.m. ◆ Switch it off at 11:30 p.m.
Setting the Sleep Timer The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of six hours. Note 1 MODE 2 TURBO OFF If you wish to switch the unit off at a specific time, refer to page 15. If the indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Press the Cooling button . ◆ The indoor unit beeps. ◆ The indication is displayed.
Cancelling the On/Off Timer If you no longer wish to use the On/Off Timer that you have set, you can cancel it at any time. 1 2 To cancel the... Switch-on timer Then press... . indication flashes. Result:The Switch-off timer . Result:The Press the Result: indication flashes. button. ◆ The indoor unit beeps. ◆ The TIMER indicator on the indoor unit switches off if no other timer is currently set. ◆ The air conditioner operates normally.
Operating Recommendation Here is a recommendation that you should follow when using your air conditioner. Topic Recommendation Power failure If a power failure occurs when the air conditioner is operating, the unit is switched off. When the power returns, you must press (On/Off) to restart it. Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges, within which the air conditioner can be used. If the air conditioner is used at... Then...
Cleaning Your Air Conditioner To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. IM IMPORTANT Before cleaning your air conditioner, ensure that you have switched off the breaker used for the unit. 1 Open the front grille by pulling on the tabs on the lower right and left sides of the indoor unit. 2 Lift out the bottom edge of the air filters and pull down to release them.
Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem E-20 Explanation/Solution The air conditioner does not operate at all ◆ Check that the breaker used for the air conditioner is switched on. ◆ Check that the OPERATION indicator on the indoor unit is on; if necessary press (On/Off) on the remote control. ◆ Check whether the TIMER indicator on the indoor unit is switched on.
Operating Your Air Conditioner Without the Remote Control Your air conditioner can be operated directly from the indoor unit if the remote control is lost or broken. 1 Open the front grille by pulling on the tabs on the lower right and left sides of the indoor unit. 2 To switch the air conditioner on, press the ON/OFF switch on the right side of the indoor unit. Result: ◆ The OPERATION indicator on the indoor unit comes on. ◆ The indoor unit beeps.
Installing a Filter (Option) The air conditioner can be fitted with a deodorizing and Bio-Pure filter to remove minute dust particles or odours. The service life of the filter is approximately three months depending on the time during which the air conditioner is used. 1 Remove the vinyl packing from the filter. Note Deodorizing filter Bio-Pure filter E-22 Do not remove the packing from a deodorizing filter until you wish to use the filter, as it will lose its properties.
Technical Specifications Indoor unit AM20A1E06A AM20A1E09A Outdoor unit UM20A1E3A Power Supply 1Ø, 220-240V~, 50Hz E-23
THIS AIR CONDITIONER IS MANUFACTURED BY: ELECTRONICS Printed in Korea
