User manual
18
Setting the On/O timer
When the air conditioner is on;
1. Press the Timer button to select (Off).
- (Off) indicator starts to blink and you can set the time.
2. Press the < or > button to set the time.
- You can set the time in 0.5 hour unit from 0.5 ~ 3 hours and 1 hour unit from
3~24 hours.
- Time can be set from minimum 0.5 hours to maximum 24 hours.
3. Press the SET button to complete the Off timer setting.
- (Off) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator ( ) will be displayed on the indoor
unit display.
- Off timer setting will be cancelled if you don't press the SET button within
10seconds after setting the time. Therefore check for the (Off) indicator on
the remote controller display and the Timer indicator ( ) on the indoor unit
display.
Cancel
Press the Timer button Select (Off) Press the < or > button Set
the time to Press the SET button.
Combining On Timer and O Timer
When the air conditioner is o When the air conditioner is on
When set time on On timer is shorter than Off timer
Ex) On timer: 3 hours, Off timer: 5 hours
- The air conditioner will turn on after 3 hours from
the moment you have set the timer and the air
conditioner will remain on for 2 hours and then turn off
automatically.
When set time on On timer is longer than Off timer
Ex) On timer: 3 hours, Off timer: 1 hour
- The air conditioner will turn off after 1 hour from the
moment you have set the timer and turn on after 2 hours
from the moment it was turned off.
• Set time for the On timer and the Off timer should be different from each other.
• When the On timer or the Off timer is set, setting can be cancelled by pressing the Power
button.
NOTE
PAC MIRAGE HPCO-AR-PH_IBIM_05321A-01_EN.indd 18 2015-03-03 오후 4:39:35