User manual

E-15

ENGLISH

Airing Your Room

To control the direction of the air flow, refer to pages 18~19.

If the atmosphere in your room is stale, you can air the room using

the Fan feature.

If necessary, press the button.

Result:

◆ The air conditioner starts up in the Cool mode.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to

prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

lt will start up normally after three minutes.

IMPORTANT

If the is not displayed at the top of the remote control, press the button

on the remote control one or more times until it appears.

Result: ◆ The indoor unit beeps each time you press the button.

◆ The air conditioner runs in the Fan mode.

You can change modes at any time.

Select the fan speed by pressing the button one or more times until

the required setting is displayed:

Result:

◆ Each time you press the button, the indoor unit beeps.

To adjust the temperature, press the button. The temperature

will be adjusted and the mode will be changed with the Cool mode.

Low

Medium

High