User manual

Selecting Energy Saving Mode

If your wish to save energy when using your air conditioner,

select the Energy saving mode with the Energy saving button.

If necessary, press the button.

Result:

◆ The air conditioner starts up in the Cool mode.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to

prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

lt will start up normally after three minutes.

IMPORTANT

Press the button.

Result:

◆ The indoor unit beeps.

◆ The air conditioner runs in the Energy saving mode.

- If the selected temperature is lower than 25°C,

it will slowly rise up to 26°C.

- If the selected temperature is higher than 26°C,

it will slowly rise.

◆ The outer air flow blade moves up and down.

To adjust the temperature, press the button one or more times until

the required temperature is displayed. Possible temperatures are between

C and 30

C inclusive.

To select the fan speed, press the button one or more times until the

required setting is displayed.

To control the direction of the air flow, refer to pages 18~19.

E-16

You can adjust the temperature only when the air conditioner

runs in the Cool mode.

You can adjust the fan speed only when the air conditioner

runs in the Cool mode.