User manual

Setting the On Timer

E-20

If you want to turn on the air conditioner before the timer reaches

the setting time, press the button.

The On timer enables you to switch on the air conditioner automatically

after a given period of time. You can set the period of time from

30 minutes to 24 hours.

Make sure that the air conditioner is turned off. The On timer can be set

only when the air conditioner is turned off.

Press the button one or more times until the required time is displayed.

Possible time is between 0.5 hour and 24 hours inclusive.

Result:

◆ Each time you press the button :

- The time is adjusted by 0.5 hour or 1 hour.

- The indoor unit beeps.

Press the button again.

To Cancel the On Timer

Press the button to complete the setting.

Result:

◆ The remaining time is displayed.

◆ Blinking of the On timer indicator stops.

◆ The air conditioner will turn on automatically when the counter

displayed on the remote control reaches the setting time as

disappearing the On timer setting.

To select an operating mode in advance, press the button until the

desired mode is displayed at the top of the remote control.

Result:

◆ The air conditioner will run in the selected mode when it is

turned on.