Digital Camera User Manual

91
The flash does not fire.

Flash off mode has been selected.

Disengage flash off mode.

The camera mode can't use the flash .

Refer to the FLASH instructions (p.35).
Incorrect date and time is displayed.

The date and time have been set incorrectly or the camera has
adopted the default settings.

Reset the date and time.
The camera buttons do not operate.

The camera has malfunctioned.

Remove/re-insert battery and switch the camera on.
A card error has occurred while the memory card is in the camera.

The memory card format is incorrect.

Re-format the memory card. (p.58)
The images don't play back.

Incorrect file name (Violation of DCF format).

Do not change the image file name.
Color of image is different to the original scene.

White balance or effect setting is incorrect.

Select the appropriate White balance and effect.
Images are too bright.

Exposure is excessive.

Reset exposure compensation.
Before contacting a service center
No image on external screen.

The external screen has not been connected properly to
the camera.

Check the connection cables.

There are incorrect files on the memory card.

Insert a memory card that has correct files.
The [Removable Disk] file does not appear in my computer’s file system.

The cable connection is incorrect.

Check the connection.

The camera is off.

Turn the camera on.

The operating system is not Windows XP, Vista, 7 / Mac OS 10.4.
Alternatively the PC does not support USB.

Install Windows XP, Vista, 7 on a PC or Mac OS 10.4 or later
on a computer that supports USB.
A part of the LCD screen does not occasionally turn on or a spot appears.

Although the LCD screen is manufactured with high precision
technology, the precision pixels
occasionally do not light or red,
white, and
blue spots appear.
ĺ
This phenomenon does not affect the quality of the recorded
image and it is not a malfunction.
A vertical line appears on the LCD screen when taking a picture of a
bright object.

If a subject
is reflecting a very bright light, a gray, black, red, or
purple vertical line may appear.
ĺ
This is a phenomenon called smear and it does not affect the
quality of the recorded image. This is not a malfunction.