Features of your new air conditioner Contents Cool Summer Offer On those hot sweltering summer days and long restless nights, there is no better escape from the heat than the cool comforts of home. Your new air conditioner brings an end to exhausting hot summer days and lets you rest. Beat the heat with your own air conditioner this summer.
Safety precautions Before using your new air conditioner, please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance. Important safety symbols and precautions: WARNING Hazards or unsafe practices that may result in severe personal injury or death. CAUTION Hazards or unsafe practices that may result in minor personal injury or property damage. Follow directions. Unplug the power plug from the wall socket.
Safety precautions FOR POWER SUPPLY WARNING Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis. Unplug the power plug and clean it with a dry cloth. Failing to do so may result in electric shock or fire. Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor.
FOR USING WARNING ENGLISH Do not place an object near the outdoor unit that allows children to climb onto the machine. This may result in children seriously injuring themselves. Do not use this air conditioner for long periods of time in badly ventilated locations or near infirm people. Since this may be dangerous due to a lack of oxygen, Open a window at least once an hour.
Checking before use Operation ranges The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use. Mode Indoor temperature Outdoor temperature Indoor humidity Cooling 16˚C~32˚C -10˚C~46˚C Relative humidity 80% or less Heating 27˚C or less -15˚C~24˚C - Dry 18˚C~32˚C -10˚C~46˚C - If the air conditioner operates in cooling mode for long period of time in high humidity area, dew may be formed.
Checking the name of the parts Your air conditioner may slightly look different from illustration shown above depending on your model.
Checking the remote controller • Point the remote controller towards the remote controller receiver of the indoor unit. • When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit indicator( ) appears on the remote controller display. Remote controller buttons Before using the functions of the remote controller, you should set the current time. (Refer to p.14) Remote controller display Power Turn on/off the air conditioner.
Remote controller display On Timer indicator Off Timer indicator indicator ENGLISH Operation mode indicator Low battery indicator Transmit indicator Quiet indicator Turbo indicator SPi indicator Smart Saver indicator d'light Cool indicator 2ndF indicator Set temperature indicator Air swing indicator Fan speed indicator Time indicator Auto (Turbo) Low Medium High • Make sure that the water does not get to the remote controller.
Basic function Basic operation is an operation mode that can be selected by pressing the Mode button. Auto In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature detected by the room temperature. • If using a multi system, in Auto operation, the system selects a temperature setting and an appropriate operation mode (COOL or HEAT) based on the room temperature at the start of the operation.
Press the button to turn on the air conditioner. Press the button to set the operating mode. ENGLISH • Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat. Press the button to set the desired fan speed. Auto (Auto) Cool (Auto), Dry (Auto) Fan Heat Press the (Low), (Auto), (Low), (Med), (Low), (Med), (High) (High) (Med), (High) button to adjust the temperature.
Adjusting the air flow direction Air flow can be directed to your desired position. Vertical air flow Air flow blades move up and down. Press the Air swing button on the remote controller. Air swing indicator will be on the remote controller display and air flow blades move up and down continuously to circulate the air. Press the Air swing button on the remote controller again, to keep the air flow direction in a constant position. Horizontal air flow Air flow blades move left and right.
mode Before using good' sleep mode, set the current time.(For setting current time, refer to the page 14.) For a comfortable sleep, the air conditioner will operate it Fall asleep Sound sleep Wake up from mode. When the air conditioner is on and in cool/heat mode button on the remote controller. indicator appears and Off timer indicator starts blinking on the remote controller display. 2. Press the button to set the time.
Setting the Current time Before using the functions of the air-conditioner, set the current time. 1. Press 2ndF button 2ndF indicator appears on the remote controller display. 2. Press Time Set button to set the current time AM or PM indicator will blink and you can set the time by pressing Temp hr. + or – button for hour and Fan min. button for minute. 3. Press Time Set button again to active it.
Setting Off timer 3. Press the Set/Cancel button to active it. On timer indicator stops blinking and reserved time will be displayed for 3 seconds. If you don’t press Set/Cancel button within 10 seconds after selecting the time the air conditioner will return to previous status. Check On timer or Off timer indicator and indicator on the indoor unit. ENGLISH Cancel Press the Set/Cancel button once again.
Using the Smart Saver function This function will set the temperature range limit to help you save energy while the air conditioner is operating in Cool mode. Press the Smart Saver button on the remote controller while the air conditioner is operating in Cool mode. Smart Saver indicator and air swing indicator appears automatically on the remote controller display. The air flow blades move up and down. If the current set temperature is lower than 24°C, it will automatically raise to 24°C.
Using the Auto Clean function Auto clean function will prevent mold from growing by eliminating the moisture inside of the indoor unit. Your indoor unit evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air. ENGLISH Press the Auto Clean button. When the air conditioner is turned off, T he Auto clean indicator on the indoor unit display appears and the Auto clean function runs.
Using the Quiet function AA You can reduce the noise generated from an indoor unit. Press the Quiet button on the remote controller while the air conditioner is operating in Cool/Heat mode. Quiet indicator appears on the remote controller display. The indoor unit will operate more quietly. Cancel Press the Quiet button once again. • If using a multi system, this function will work only when the Quiet function is set on all operated indoor units.
Cleaning the air conditioner • Make sure the power is turned off and unplugged from the wall socket when cleaning the air conditioner. ENGLISH Cleaning the indoor unit Wipe the surface of the unit with a slightly damp micro fiber cloth when needed. • Contact the service center when you clean the indoor unit heat exchanger because it needs to be disassembled. • Since the panel of the indoor unit is easily scratched, you should use a micro fiber cloth to clean the panel.
Cleaning the air conditioner Removing the Full HD filter Grab the handle and lift it up. Then, pull the Full HD filter towards you and slide it down. Full HD filter Cleaning the Full HD filter Washable foam based Full HD filter captures large particles from the air. The filter is cleaned with a vacuum or by hand washing. Open the panel and put the Full HD filter out. Clean the Full HD filter with a vacuum cleaner or soft brush. If dust is too heavy, rinse it with running water.
Maintaining the air conditioner If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition. 2. Before using the air conditioner again, dry the inner components of the air conditioner again by running in Fan mode for 3 to 4 hours. This helps remove odors which may have generated from dampness. Periodical checks Refer to the following chart to maintain the air conditioner properly.
Troubleshooting Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses. PROBLEM SOLUTION The air conditioner does not work at all. • Check power status and then operate the air conditioner again. • Plug in or switch on the circuit breaker and then operate the air conditioner again. • Check if you have set the Off Timer. Operate the air conditioner again by pressing the Power button. The temperature adjustment is not working.
SOLUTION Error is indicated. , • If error indicator such as All blink, , , , , , , , contact nearest contact center. , , , , , , , , , , , , , , , appears on the indoor unit display, ENGLISH PROBLEM Noise is generated. • Depending on the status of the air conditioner usage, noise can be heard when refrigerant flow movement changes. It is normal. Smoke is generated from the outdoor unit.
QUESTIONS OR COMMENTS? COUNTRY ALBANIA AUSTRIA CALL 42 27 5755 0810 - SAMSUNG (7267864, € 0.
AQV09K Series AQV12K Series AQV18K Series AQV09Y Series AQV12Y Series AQV18Y Series Air Conditioner user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.