Specifications

17
ENGLISH
Using the Auto Clean function
Auto clean function will prevent mold from growing by eliminating the moisture inside of the indoor unit. Your indoor unit
evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air.
The sensor in the indoor unit, which measures temperature and humidity in a room, keeps the room temperature in the most
comfortable level by controlling the temperature and the fan speed automatically.
Press the Auto Clean button.
Press the d'light Cool button on the remote controller while the air conditioner is
operating in Cool mode.

d'light Cool indicator and air swing indicator appears automatically on the remote
controller display.

The air conditioner will set the fan speed to auto and adjust the temperature
automatically according to the room temperature and humidity.
• The Auto clean indicator appears only on the indoor unit display as
(Clean).
• When the air conditioner is turned on, the Auto clean function runs after
stopping the air conditioner operation.
• d'light Cool function is only available in Cool mode.
• When d'light Cool function is activated, temperature sets automatically and
will appear on the remote controller display.
• If you press the Mode button while the d'light Cool function is on, it will cancel
the function.
• If using a multi system, this function will work only when the d'light Cool
function is set on all operated indoor units.
Using the d'light Cool function
When the air conditioner is turned off,

The Auto clean indicator on the indoor unit display appears and the Auto clean function
runs.
When the air conditioner is turned on,

After stopping the air conditioner operation , the Auto clean indicator on the indoor
unit display appears and the Auto clean function runs.
Press the d'light Cool button once again.Cancel
Press the Auto clean button once again. Cancel
※

Auto Clean time can vary, depending on the previously used mode.
Auto(cool), Cool, Dry mode : approximately 30 minutes.
Auto(heat), Heat, Fan mode : approximately 15 minutes.