Specifications

19
ENGLISH
Cleaning the air conditioner
Cleaning the indoor unit
Cleaning the outdoor unit heat exchanger
Opening the panel

Wipe the surface of the unit with a slightly damp micro fiber cloth
when needed.

When dust accumulates on the heat exchanger, it may decrease cooling
performance. Therefore, clean it regularly.

Spray water to clean the dust.
Tightly grip each side of the front panel and lift the panel up to open.
Then release the panel which should be automatically positioned to hold
the panel open.

To close the panel, slightly lift up the front panel while pushing gently
and lower the panel.
• Do not clean the display using alkaline detergent.
• Do not use sulfuric acid, hydrochloric acid, organic solvents
(such as thinner, kerosene and acetone etc.) to clean the
surface of the product or put any stickers on it.
They may damage the surface of the air conditioner.
• Be careful with the sharp edges on the outdoor unit heat
exchanger.
• If it is difficult to clean the outdoor unit heat exchanger on
your own, contact service center.
• Contact the service center when you clean the indoor unit
heat exchanger because it needs to be disassembled.
• Since the panel of the indoor unit is easily scratched, you
should use a micro fiber cloth to clean the panel.
When you use the micro fiber cloth, slightly dampen the cloth
and remove any debris on the cloth to avoid scratches.
Heat exchanger
(Illustration may differ slightly
depending on the models)
• Make sure the power is turned off and unplugged from
the wall socket when cleaning the air conditioner.