Installation manual

13
Remote controller display
• The signal may not be received well of electronic lighting style uorescent lamps such as inverter uorescent lamps
are in the same space.
• If other electrical products operate by the remote controller, call your nearest contact center.
Battery changing time
When the battery is exhausted, ( ) will be displayed in the remote controller display. When the icon appears, change the
batteries. The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for long time, remove the batteries from the remote controller and store it.
Inserting the batteries
1. Push the lever as arrow
indicates on the rear side of the
remote controller and pull up.
2. Insert two AAA batteries.
Check and match the “+” and “-”
signs accordingly. Make sure you
have inserted the batteries in
correct position.
3. Close the cover by place it back to its
original position.
You should hear click sound when the cover is
locked properly.
• Make sure that the water does not get to the remote controller.
Quiet indicator
Set temperature indicator
Turbo indicator
SPi indicator
2
nd
F indicator
Smart Saver indicator
d'light Cool indicator
On Timer indicator
O Timer indicator
indicator
Operation mode
indicator
Fan speed indicator
Auto (Turbo)
Low
Medium
High
Low battery indicator
(Has no this function)
Transmit indicator
Air swing indicator
Time indicator
Australia_AQV24&30T@_IB&IM_EN_03562A(1).indd 13 2013-01-07 오후 4:45:34