Service manual

Disassemble and reassemble

1 Indoor unit

Stop operation of the air conditioner and remove the power cable before repairing the unit.

If you disassemble the heat exchanger, you must pump down at first.

No. Part Procedure Remark

Front Panel

1) Stop the operation of the air conditioner

and block the main power.

2) Separate the tape from the front panel.

3) Contract the second finger to the left,

and right handle. And pull the inlet grille

to open.

4) Take the left and right filter out.

5) Loosen one of the right screw and

separate the terminal cover.

6) Loosen three screws of front panel.

7) Pull the upper left, center and right of

discharge softly so that the outside

cover is pulled out.

8) Pull softly the lower part of discharge and

push it up.

Caution

Assemble the front panel and fix the

hooks of left, center and right.

*Taking off the deodorizing filter.

AS07AS(6)MA SM_E_15774 2/12/04 9:18 PM Page 4