OWNER'S INSTRUCTIONS Indoor unit AS09N8MD AS12NBMD Split-type Room Air Conditioner (Cool) E DB98-16828A(1)
Safety Precautions The following safety precautions must be taken when using your air conditioner . 1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials over it. 2 NEVER spill liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your air conditioner and contact your installation specialist. 3 Do NOT insert anything between the air flow blades, as the inner fan may become damaged and you may be hurt.
ENGLISH Contents PREPARING YOUR AIR CONDITIONER Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . .5 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . .
View of the Unit The design and shape are subject to change according to the model. Indoor Unit AS09(12)N8(B)MD Power Standard Nature Saving Silence Timer Air Inlet Air filter (under the grille) Air flow blades (outlet) On/Off & 5 Way selection button/ Remote Control Sensor Power Standard N ot e Nature Saving Silence Timer For details on the 5 Way, refer to page 8. Outdoor Unit The design and shape are subject to change according to the model.
ENGLISH Remote Control - Buttons and Display Remote control transmission indicator Operating mode ( AUTO, DRY, COOL, FAN) Temperature setting Turbo mode Sleep mode Fan speed Mode selection button (AUTO, COOL, DRY, FAN) Temperature adjustment buttons Turbo/Sleep mode selection button Air flow direction Fan speed adjustment button Swing button On Timer setting On Timer button Off Timer setting Off Timer button Battery discharge indicator 5 Way selection button On/Off & Timer Set/Cancel button
Getting Started You have just purchased a split type air conditioner and it has been installed by your installation specialist. Your Owner’s Instructions contains valuable information on using your air conditioner. Please take the time to read it as it will help you take full advantage of the unit’s features. The booklet is organized as follows.
ENGLISH Inserting the Remote Control Batteries You must insert or replace the remote control batteries when : You purchase the air conditioner The remote control does not work correctly N ot e Use two AAA, LR03 1.5V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used.
5 Way Function You can select the 5 Way function with operating mode of the air conditioner for more comfortable circumstances. You can use the 5 Way function with the indoor unit as well as the remote control. Thus, you can use this function even though you have lost your remote control. Using with the indoor unit 1 Nature (ON/OFF) button one time and then select the desired AS09(12)N8(B)MD Power Standard Press the mode. Saving Silence To obtain a(n)... Timer Then select...
ENGLISH Selecting the Automatic Operating Mode You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically. You can adjust the standard temperature but not the fan speed. 1 If necessary, press the Result: IMPORTANT 2 The 5 Way indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps.
Cooling Your Room You must select the Cool mode if you wish to adjust the: Cooling temperature Fan speed when cooling 1 If necessary, press the Result: IMPORTANT (On/Off) button. The 5 Way indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps.
ENGLISH Changing the Room Temperature Quickly The Turbo cooling function is used to cool your room as quickly as possible. Ex a m p l e : You have just come home and find that the r oom is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the Result: 2 Press the Result: 3 button.
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press the Result: IMPORTANT 2 (On/Off) button. The 5 Way indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps.
ENGLISH Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary, press the Result: 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: N ot e 3 (On/Off) button. The 5 Way indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps.
Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the SWING button one or more times as required. Result: The outer blade is adjusted vertically. RECOMMENDATION 2 Adjust the blade to face... Cooling Upwards.
ENGLISH Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. 1 To set the operating time, press the ON TIMER button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hour inclusive. 2 Press the Result: 3 (Set/Cancel) button to complete the setting. The remaining time is displayed. Blinking of the timer indicator stops.
Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. 1 To set the operating time, press the OFF TIMER button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hour inclusive. 2 Press the (Set/Cancel) button to complete the setting. Result: The remaining time is displayed. Blinking of the timer indicator stops.
ENGLISH Setting the Sleep Timer The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of six hours. N ot e If you wish to switch the unit off at a specific time, refer to page 16. 1 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. 2 Press the button one or more times until remote control. Result: Cooling appears on the The indoor unit beeps.
Operating Recommendations Here is a recommendation that you should follow when using your air conditioner. E-18 Topic Recommendation Power failure If a power failure occurs when the air conditioner is operating, the unit is switched off. When the power returns,the air conditioner starts up again automatically.
ENGLISH Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. If the air conditioner is used at... Then... High temperatures The automatic protection feature may be triggered and the air conditioner stopped. Low temperatures A water leak or some other malfunction may occur if the heat exchanger freezes.
Solving Common Problems Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem E-20 Explanation/Solution The air conditioner does not operate at all Check that the breaker used for the air conditioner is switched on. Check that the 5 Way indicator on the indoor unit is on; if necessary press the (On/Off) button on the remote control. Check whether the TIMER indicator on the indoor unit is switched on.
Model Indoor unit AS09N8MD AS12NBMD ENGLISH Technical Specifications Power Supply 220V~, 50Hz E-21
THIS AIR CONDITIONER IS MANUFACTURED BY: ELECTRONICS Made by Samsung