User Guide
48
Chapter 3.
Using the computer
Using the Touch Screen
(For touch screen models only)
Replacing the pen tip
If the pen tip is damaged, you can replace the pen tip as follows:
1
Hold the pen tip by inserting it into the hole of the ring and
remove the tip by pulling it out.
2
Insert the new pen tip into the S Pen.
Take care so that the pen tip does not spring out when taking
it out.
Screen Calibration
When you use the touch screen for the rst time or the pointer
on the screen does not precisely match the points you touch,
calibrate the touch screen using the Tablet PC Settings menu.
The calibration process for the touch screen may dier depending
on the operating system and may not be available in some
operating systems. The following descriptions assume the
Windows 8 operating system.
1
Click Charms menu on the Desktop > Settings
검색
공유
시작
장치
설정
>
Control Panel > Hardware and Sound > Tablet PC
Settings > Calibrate.