Digital Surround AV Receiver System AV-R700 Instruction Manual ELECTRONICS AH68-01597B
Safety Warnings CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. PREPARATION CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN Precautions This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit.
Features Contents √√ What is AV receiver? √√ Let's find out difference between general amplifier and AV receiver! General Amplifier AV Receiver 2 channels (left speaker and right speaker) Multiple Channel (5.
Description HEADPHONE Jack POWER STANDBY Indicator POWER button INPUT button SURROUND button EXTERNAL AUDIO INPUT CONNECTOR EXTERNAL VIDEO INPUT CONNECTOR REMOTE CONTROL Sensor VOLUME CONTROL EXTERNAL OPTICAL DIGITAL AUDIO INPUT CONNECTOR SELECTION button TUNING ( , ) button SAT VIDEO INPUT AM ANTENNA 5.
Description POWER button TV/VIDEO, FUNCTION button SLEEP button TUNER button NEO : 6 button DISPLAY button MODE button PREPARATION [ Remote Control ] Insert Remote Batteries TV Indicator VCR Indicator AV RECEIVER Indicator DVD Indicator MODE button MO/ST button SUBWOOFER button SFE MODE button EX/ES button EFFECT button 1 Remove the battery cover on the back of the remote by pressing down and sliding the cover in the direction of the arrow. 2 Insert two 1.
Connecting the Speakers Before moving or installing the product, be sure to turn off the power and disconnect the power cord. PASSIVE SUBWOOFER POWER AMPLIFIER FRONT (R) FRONT (L) REAR (R) REAR (L) ACTIVE SUBWOOFER (BUILT-IN POWER AMPLIFIER) CONNECTIONS MAIN UNIT AV-R700 SL SR SB CENTER Position of AV Receiver Rear Speakers • Place AV Receiver on the dedicated stand or chest of living room or under the TV stand properly.
Connecting External Components Connecting Video Component Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting External Component Connecting Audio Component/ 5.1 Channel Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the FM and AM Antennas If AM reception is poor, connect an outdoor AM antenna(not supplied). DIGITAL OUT AUDIO OUT R FM Antenna (supplied) L Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. FM antenna connection 1.
Before Using AV Receiver To Select the Function Turning On/Off REMOTE CONTROL MAIN UNIT Method 1 Press the FUNCTION button. Press the FUNCTION button. 1 Connect the power plug to the outlet. the POWER ( ) button of the main unit. 2 Press This unit will be turned on or off. • Each time you press the this button, 5.1CH MULTI CH ➝ CD ➝ DVD ➝ SAT ➝ VCR ➝ AUX ➝ FM ➝ AM will be selected in turn.
Setting the Speaker Before moving or installing the product, be sure to turn off the power and disconnect the power cord.Signal outputs and frequency response from the speaker will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. √ REMOTE CONTROL SPK SEL. button to select the speaker you want. 1 Press Each time you press this button, F.SPK ➝ C.SPK ➝ S.SPK ➝ SB SPK ➝ • SW SPK ➝ CROVR ➝ SPK MODE OFF will be selected in turn.
Setting the Speaker √ REMOTE CONTROL 1 Press the SPEAKER DISTANCE button to select the speaker you want. MAIN UNIT • Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.B ➝ S.L ➝ S.W ➝ DISTANCE OFF will be selected in turn. 2 Press …† button to set the speaker distance. and hold SURROUND button for about 5 seconds 1 Press “SETUP MODE” appears on the display and enters into Setup Mode. 2 Press INPUT button 2 times. • For F.L, CEN, F.R, S.
Setting DRC (Dynamic Range Compression) Test Tone You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. Use test tine to check speaker connection status or defect of speaker or adjust the level. To Automatically Output Test Tone √ REMOTE CONTROL 1 Press TEST TONE button. √ • Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.B ➝ S.L ➝ S.W.
Test Tone Use test tone to check speaker connection status or defect of speaker or adjust the level. To Automatically Output Test Tone To Manually Output Test Tone √ MAIN UNIT MAIN UNIT and hold SURROUND button for about 5 seconds. 1 Press “SETUP MODE” appears on the display and enters into Setup Mode. 2 Press INPUT button 4 times. “TEST-T AUTO” appears in the display. 3 Press SURROUND button. and hold SURROUND button for about 5 seconds.
Setting Speaker Level You can set the balance and level of speakers √ Remote Control SPK LEVEL button to select the speaker you want. 1 Press Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.B ➝ S.L ➝ S.W ➝ • Remote Control SPK LEVEL OFF will be selected in turn. …† button to set the speaker level you want. 2 Press You can adjust it from -10 to +10dB by 1 step. 1 Press and hold SURROUND for about 5 seconds. • • “SETUP MODE” appears on the display and enters into Setup Mode.
Dolby Pro Logic llx Mode You can experience surround sound regardless of type of stereo mix by making existing Dolby Surround mix sound similar to discrete 5.1 Channel Surround. REMOTE CONTROL MODE button. 1 Press Each time you press this button, MUSIC ➝ CINEMA ➝ MATRIX ➝ GAME ➝ • PROLOGIC will be selected in turn. MAIN UNIT 1 Press SURROUND button briefly to select “DPL llx” Mode. • Each time you press this button, DPL ll x ➝ NEO:6 ➝ SFE ➝ STEREO will be selected in turn. , ) button.
Dolby Pro Logic llx Effect This function works only in Dolby PRO LOGIC IIX MUSIC Mode. REMOTE CONTROL MODE button to select ‘MUSIC’ Mode. 1 Press EFFECT button. 2 Press Each time you press this button, C-WIDTH ➝ DIMENSION ➝ PANORAMA will be • selected in turn. MAIN UNIT 1 Press and hold SURROUND button for about 5 seconds. • “SETUP MODE” appears on the display and enters into Setup Mode.Press • 3 3 Press …† button to select Dolby Pro Logic IIx effect you want. Press SURROUND button.
NEO:6 Mode You can play back 2 channel sound in 6.1 channel of 360 degree surround when enjoying music or movie. REMOTE CONTROL NEO:6 MODE button. 1 Press Each time you press this button, MUSIC ➝ CINEMA will be selected in turn. • MAIN UNIT SURROUND button briefly to select “NEO:6” Mode. 1 Press Each time you press this button, DPL ll x ➝ NEO:6 ➝ SFE ➝ STEREO will be • selected in turn. SELECT( , ) button. 2 Press Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
SFE Mode Refer to the unique sound existing at specific place and you can feel live sound as if you are listening at actual site. REMOTE CONTROL SEF MODE button. 1 Press Each time you press this button, LIVE ➝ ROCK ➝ CLASSIC ➝ JAZZ ➝ MIDNIGHT • ➝ HALL ➝ CINEMA ➝ CHURCH will be selected in turn. MAIN UNIT SURROUND button briefly to select ‘SFE’ Mode. Each 1 Press time you press this button, DPL II x ➝ NEO:6 ➝ SFE ➝ STEREO will be selected in turn. , ) button.
EX/ES Mode This mode enable you to listen 6.1 channel surround to the source encoded to Dolby Digital-EX, DTS-ES such as DVD. This function works when Dolby Digital 5.1 channel source is inputted, and does not work when LPCM and Dolby Digital 2 channel source are entered. REMOTE CONTROL Press EX/ES button. • Each time you press this button, EX/ES AUTO ➝ EX/ES ON ➝ EX/ES OFF will be selected in turn. MAIN UNIT Method and hold SURROUND button for about 5 seconds.
Stereo Mode You can select this mode when you listen to the sound at Front-Left speaker, Front-Right speaker and subwoofer. For Surround Mode and Input Signal Surround Mode DOLBY (MUSIC, CINEMA, MATRIX, GAME, PROLOGIC) NEO:6 (MUSIC, CINEMA) Press STEREO button. • “STEREO” appears in the display and Stereo Mode is selected. MAIN UNIT Press SURROUND button briefly to select ‘STEREO’. • Each time you press this button, DPL ll x ➝ NEO:6 ➝ SFE ➝ STEREO will be selected in turn.
Listening to Radio Presetting Radio Stations You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation. You can preset to 30 stations including FM and AM broadcasting. REMOTE CONTROL Ex) If you preset FM 89.1 station in 2ch TUNER button. 1 Press Each time you press this button, FM ➝ AM will be selected in turn. • Select button and then TUNING/CH( 2 Press select 89.1.
About RDS broadcasting PTY (Program Type) indication and PTY-SEARCH function Using the RDS (Radio Data System) to receive FM stations RDS allows FM stations to send an additional signal along with their regular program signals. For example,the stations send their station names,as well as information about what type of program they broadcast, such as sports or music,etc. When tuned to an FM station which provides the RDS service,the RDS indicator lights up on the display. • Description on RDS function 1.
Convenient Functions Reset Function Sleep Timer Function You can set the time that this unit will shut itself off. REMOTE CONTROL Press the SLEEP button. • SLEEP : OFF ➝ 15 ➝ 30 ➝ 45 ➝ 60 ➝ 90 ➝ 120MIN will be selected in turn. REMOTE CONTROL 1 Press the MUTE button. • MUTE appears on the display. 2 Press “0” button five times and then press ENTER button. …,† buttons to select “YES”. 3 Press The unit automatically back on in 5 seconds. Caution! To Check Sleep Timer Press SLEEP button.
Operating TV with Remote Control TV Brand Code List 1 2 3 4 Brand Press MODE button to make the TV indicator on the remote control flash. Press POWER( TV. ) button to turn on the Point the remote control toward the TV. While holding down POWER( ) button, enter the code corresponding to your brand of TV. • If the code matches the TV's code, the TV will be turned off. • If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.
Operating VCR (DVD) with Remote Control VCR Brand Code List Brand 1 Press MODE button to make VCR indicator on the remote control flash. • If you operate DVD, press Device Select button to make DVD indicator on the remote control flash. 2 3 4 Press POWER( VCR (DVD). ) button to turn on the Point the remote control toward the VCR (DVD). While holding down POWER( ) button, enter the code corresponding to your brand of VCR (DVD).
Before Calling for Service Check Symptom Can't turn it on. It does not work when the button is pressed. • Is the power code plugged into the outlet? • Isn’t the air too dry to cause electrostatics? Symptom Remedy • Is the rear center speaker connected • Connect the power plug to the outlet. • Disconnect the power plug and connect it again. Check There is no sound from rear center speaker properly? component connected properly? • Does the Mute function work? Sound is not produced.
Memo Specifications GENERAL FM TUNER AM TUNER AMPLIFIER FREQUENCY RESPONSE VIDEO OUTPUT Power Supply Standby Power Consumption Power Consumption Weight Dimensions (W x H x D) Operating Temperature Range Operating Humidity Range Frequency Response Usable Sensitivity S/N Ratio Distortion Stereo Separation Tuner Output Level Frequency Response S/N Ratio Usable Sensitivity Distortion Rated Output Front Speaker(Left+Right) Center Speaker Rear Speaker(Left+Right) Rear Center Speaker Input Sensitivity/Impe