OWNER’S INSTRUCTIONS AW0691L AW0891L AW1091L AW1291L AW1891L Window-type Room Air Conditioner (Cool) E F DB98-09672A(1)
Safety Precautions The following safety precautions must be taken when installing and using your air conditioner. 1 The air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring, earthing and safety regulations. Depending on national regulations and your specific installation, you may need to install: ◆ A circuit breaker For further information on electrical requirements, contact a professional electrician.
Contents ◆ PREPARING YOUR AIR CONDITIONER ■ ■ ■ ■ ■ Safety Precautions ......................................................................................... Description of Each Component .................................................................... Remote Control - Buttons and display ............................................................ Getting Started ............................................................................................... Inserting the Remote Control Batteries ..
Description of Each Component ❄ The design and shape are subject to change, depending on the model. Air outlet Inner air flow blades (right/left orientation) Air outlet Outer air flow blades (up/down orientation) Ventilation lever Air inlet (Outside) Air inlet (Inside) Air filter (Inside) Power plug (The type of power plug may differ, depending on the local power supply.
Remote Control - Buttons and display Remote control transmission indicator Operating mode ( Cool, Dry, Mode selection button (Cool, Fan, Dry) Fan) Temperature setting Sleep mode Temperature adjustment buttons Sleep timer setting button Energy Saving mode Fan speed adjustment button Fan speed On Timer setting Off Timer setting Energy Saving button Timer setting button Timer Set/Cancel button Battery discharge indicator On/Off button E-5
Getting Started You have just purchased a Samsung window-type room air conditioner which should be installed following your installation manual. Your Owner’s Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit’s features. The booklet is organized as follows.
Inserting the Remote Control Batteries You must insert or replace the remote control batteries when : ◆ You purchase the air conditioner ◆ The remote control does not work correctly ➢ ◆ Use two AAA, LR03 1.5V batteries. ◆ Do not use old batteries or different kinds of batteries together. ◆ Batteries may be completely discharged after 12 months, even if they have not actually been used.
Using the Control Panel on the Unit This chapter indicates how to operate and program your air conditioner with the control panel on the unit.
Cooling Your Room You must select the Cool mode if you wish to lower the temperature in your room. You can also set the Fan speed. 1 Press the Result: (On/Off) button. ◆ The air conditioner starts up in the mode selected when the unit was last used. ◆ The unit beeps twice. ☛ 2 The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: ◆ Plugged in ◆ Stopped It will start up normally after three minutes.
Ventilating Your Room If the air in your room is stale, you can ventilate the room using the Fan feature. 1 If you wish to discharge stale air, push the ventilation lever on the front of the unit to the right and open position ( Result: ). ◆ The air inside the room circulates and stale air is discharged outside. Otherwise, push the ventilation lever to the left and closed position ( Result: 2 ◆ The air simply circulates inside the room. If necessary, press the Result: ). (On/Off) button.
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. You can operate the Dry mode only by using the control panel. 1 If necessary, press the Result: ☛ 2 ➢ ◆ The unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: ◆ Plugged in ◆ Stopped It will start up normally after three minutes.
Using the W i re l e s s Remote C o n t ro l This chapter indicates how to operate and program your air conditioner with the wireless remote control.
Cooling Your Room You must select the Cool mode if you wish to adjust the: ◆ Cooling temperature ◆ Fan speed when cooling 1 If necessary, press the Result: ☛ (On/Off) button. ◆ The air conditioner starts up in the mode selected when the unit was last used. ◆ The unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: ◆ Plugged in ◆ Stopped lt will start up normally after three minutes.
Ventilating Your Room If the air in your room is stale, you can ventilate the room using the Fan feature. 1 If you wish to discharge stale air, push the ventilation lever on the front of the unit to the right and open position ( Result: ). ◆ The air inside the room circulates and stale air is discharged outside. Otherwise, push the ventilation lever to the left and closed position ( Result: 2 ◆ The air simply circulates inside the room. If necessary, press the Result: ). (On/Off) button.
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary, press the Result: (On/Off) button. ◆ The air conditioner starts up in the mode selected when the unit was last used. ◆ The unit beeps.
Setting the On Timer Remote Control The On Timer enables you to switch on the air conditioner automatically after a given time. You can select the On timer only when the air conditioner is off. You can select the On timer only when the air conditioner operates in the Cool mode. 1 Check that the air conditioner has been switched off; if necessary, press the (On/Off) button. 2 To set the operating time, press the button one or more times until the required time is displayed.
Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given time. You can select the Off timer only when the air conditioner is on. You can select the Off timer only when the air conditioner operates in the Cool mode. 1 Check that the air conditioner has been switched on; if necessary, press the (On/Off) button. 2 To set the operating time, press the button one or more times until the required time is displayed.
Setting the Sleep Timer The Sleep Timer can be used when you are cooling to switch the air conditioner off automatically after a period of 8 hours. ➢ Remote Control If you wish to switch the unit off at a specific time, refer to page 17. 1 Make sure that you have selected the Cool mode. 2 Press the Result: Control Panel Cooling button on the remote control. ◆ ◆ ◆ ◆ Each time you press a button, the unit beeps. The indicator on the remote control is displayed.
Selecting Energy Saving Mode If you wish to save energy when using your air conditioner, select the energy saving mode. 1 To select the energy saving mode, press the button on the remote control one or more times until the Energy Saving indicator lights up. Result: ➢ 2 Remote Control ◆ The E-saver indicator lights up on the control panel. ◆ The fan and compressor cycle on and off together. ◆ The fan will continue to run for a short time after the compressor cycles off.
Adjusting the Air Flow Direction Horizontally Depending on the position of the unit in your room, you can adjust the orientation of the inner air flow blades on the unit. Adjust the air flow blades to the desired position by pushing them side to side. Adjusting the Air Flow Direction Vertically Again depending on the position of the unit in your room, you can adjust the orientation of the outer air flow blades on the right-hand side of the unit. RECOMMENDATION 1 Adjust the blades to face...
Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. Mode Indoor Temperature Outdoor Temperature Indoor Humidity Cooling 21°C to 32°C approx. 21°C to 43°C approx. 80% or less If the air conditioner is used at... Then... Higher temperature The automatic protection feature may be triggered and the air conditioner stopped.
Cleaning Your Air Conditioner Be sure to clean the air filter periodically to maintain the air conditioner in the best condition for a long period of time. ☛ 1 Open the front grille by pulling the tabs on both sides of the grille. Then lift it up slightly to open the front grille completely. 2 Grab the tabs on the filter and pull it up and out. 3 Remove all dust on the air filter with a vacuum cleaner or brush. 4 When you have finished, insert the air filter back into its original position.
Solving Common Problems Before contacting an authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem Explanation / Solution The air conditioner does not operate at all ◆ Check that the circuit breaker used for the air conditioner has not been triggered. ◆ Check that the power cable is plugged into a wall socket and the socket is switched on, if necessary.
YOUR SAMSUNG ROOM AIR CONDITIONER WARRANTY Limited Warranty to Original Purchaser Samsung will repair or replace, at our option, this product if found defective within the warranty period beginning from the original date of purchase. This Samsung Product is warranted by SAMSUNG ELECTRONICS CANADA Inc. against manufacturing defects in materials or workmanship for the period specified.
