User manual

English - 21
SETTING UP
DISASSEMBLING THE FLEX
DOOR
1. Take out the Flex Zone (1) by lifting it up.
(1)
(1)
2. Take off the cover (2) with the harness using a
fl at head screwdriver (-).
(2)
(2)
3. Press the locking tab and separate the Wire
Connector.
4. Remove 1 hex head bolt from each side with a
socket wrench (10mm).
5. Lift up the Flex door from the rails.
RE-ASSEMBLING THE FLEX
DOOR
To reattach the fl ex door after you have moved the
fridge to its fi nal location, assemble parts in reverse
order.
When reassembling the Flex Door, be
sure to reconnect the wire harness. If the
wire harness is not reconnected, the Flex
Room does not work.
CAUTION
DA68-03030C-01.indb 21DA68-03030C-01.indb 21 2015. 5. 7.  8:282015. 5. 7.  8:28