Air Purifier User manual AX26*G3100G* • Thank you for purchasing this Samsung air purifier. • Before operating this unit, please read this user manual carefully and retain it for future reference. ACR044-00_ACR AX3100B_AA_EN_.
Contents Safety Information 4 Safety Information 4 Overview 8 Package Contents 8 Removing the filter 9 Attaching the filters 10 Component names 12 Air purifier 12 How to Use 14 Using the functions 14 SmartThings 16 SmartThings app 16 Cleaning 19 Cleaning the product 19 Cleaning the filters 20 Troubleshooting 21 Before Requesting Service 21 2 English ACR044-00_ACR AX3100B_AA_EN_.
The energy efficiency of this ENERGY STAR qualified model is measured based on a ratio between the model's CADR for smoke and the electrical energy it consumes, or CADR/Watt.
Safety Information READ AND SAVE THESE INSTRUCTIONS California Proposition 65 Warning (US) Safety Information WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. These safety precautions are for owner's safety and preventions of property damage. Therefore, please read this manual thoroughly before using your product. WARNING Hazards or unsafe practices that may result in severe personal injury or death.
Safety Information FOR POWER SUPPLY WARNING se a dry cloth to wipe the power plug and the contact area to keep them free from dust, water and other U undesirable substances. • Follow instructions to avoid electric shock or fire. Please contact your local Samsung Service Center if the power plug or cord is damaged. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Safety Information Safety Information In the event of a gas leak in proximity of the air purifier, do not touch it or attempt to unplug it. Immediately ventilate the room and contact your provider or a certified technician for advice. • Do not turn the ventilation fan on. • A spark can cause an explosion or fire. Please contact your local Samsung Service Center when you require repair service. • Follow instructions to avoid malfunction, water leakage, electric shock or fire.
Keep your air purifier at least 7 feet away from a TV or other audio/visual media. • They can be affected by video or audio noise. Operate the air purifier with no obstacles in the vicinity. • At least 24 inches from both sides of the product, at least 10 inches from the product inlet. • The product is designed to intake, purify, and discharge polluted air. If there is any obstacle in the vicinity, the purification capacity may decrease.
Overview Package Contents Accessories Overview Pre-filter x1 1) 2-in-1 filter ¹⁾ (Deodorization Filter+Dust Collecting Filter) x1 User Manual x1 - The 2-in-1 filter is a consumable filter and cannot be reused by washing it with water. - Please remove vinyl from filter before use. NOTE • You can purchase your replacement filter by searching CFX-K1001 on Samsung.com Product specifications The product dimensions are based on the maximum dimensions. They may vary depending on the measurement position.
Removing the filter The product design and specifications are subject to change without prior notice for quality improvement. STEP 1 Opening the front panel • While pressing down on the top of the product with your thumbs, use your other fingers to pull the front panel towards yourself. Overview STEP 2 Remove the pre-filter. STEP 3 R emove the 2-in-1 filter. STEP 4 Remove the vinyl packaging from the filters. English 9 ACR044-00_ACR AX3100B_AA_EN_.
Attaching the filters STEP 1 Place the 2-in-1 filter. • Confirm that the filter attachment direction is correct before attaching it. Overview STEP 2 Insert the pre-filter. • Insert the pre filter into the grooves at the bottom of the product, and insert the clip at the top. STEP 3 Closing the front panel • Insert the front panel into the grooves at the bottom of the product. • Push and close the front panel, ensuring that the 8 latches are inserted.
• • • Tips for using the 2-in-1 filter Overview • • NOTE If you use the air purifier without a filter attached, the function will not be as effective. When using the device for the first time after purchase, you may experience some subtle odour from the unused filters. – This will disappear naturally after using the device for a day or two. Keep the windows and doors closed whenever you can while the product is running.
Component names Air purifier This image is a representative image. The product design and specifications are subject to change without notice for the purpose of improving quality. Main unit 01 06 07 02 03 Component names 04 05 01 02 03 04 Buttons and display Dust sensor Power plug 2-in-1 filter 05 Pre-filter 06 Air outlet 07 Air inlet/Front panel 12 English ACR044-00_ACR AX3100B_AA_EN_.
Display and buttons 01 07 Current mode Sleep mode indicator Air quality indicator Lock icon Wi-Fi icon 03 04 05 06 09 06 07 08 09 Component names 01 02 03 04 05 08 02 2-in-1 filter replacement reminder Power/Lock button Fan speed button Sleep mode / Filter reset button NOTE • Air quality is shown through the dust sensor. • Air quality indicator colours (Polluted) red → yellow → green → blue (clean) English 13 ACR044-00_ACR AX3100B_AA_EN_.
Using the functions If you hear a chime sound when you connect the power plug, the power supply has been connected properly. Turning on/off the air purifier • Press the Power button to start operation of the air purifier. • When you first turn on the air purifier after connecting the power cord, a chime sound is played and cleaning operation (fan speed: Auto) starts. • When the power has been turned off and then on again, the product operates in its previous operation mode.
2-in-1 filter replacement reminder • If the filter replacement reminder blinks during operation of the air purifier, replace the 2-in-1 filter, and then press and hold the Sleep button for more than 3 seconds to turn off the reminder. • The reminder should also be turned off by pressing and holding the Sleep button for more than 3 seconds when you have replaced the filter for any reason before the replacement reminder lights up.
SmartThings SmartThings app To use the SmartThings app, connect the product to the network in the sequence described below. The images shown may differ depending on your smartphone model, OS version and manufacturer. You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE, 5G or more wireless networks.
2 Registering your Samsung account • Select manually: Air purifier > Samsung • Scan: Samsung Air purifier • A Samsung account is required to use the SmartThings app. To create your Samsung account and log in to your account, follow the instructions displayed on the SmartThings app. You do not need to install an additional app. NOTE • If you already have a Samsung account, log in to the account.
SmartThings app NOTE • For the security protocols for wireless/wired access points, WPA-PSK and WPA2-PSK are recommended. For the authentication methods, AES is recommended. New Wi-Fi authentication specifications and Wi-Fi nonstandard authentication methods are not supported. • The product supports the IEEE802,11 b/g/n (2,4 GHz) communication protocol. (Samsung recommends IEEE802,11n.
Cleaning the product Be sure to disconnect the power plug from the socket before cleaning the product. Cleaning the air purifier exterior • Dampen a soft cloth with lukewarm water and wring it out, and then wipe the product exterior with it. • Use cotton swabs to wipe the grooves on the front panel. • If it is hard to remove dust on the front panel, remove the panel and wash it with water. CAUTION • Do NOT wipe the product with an alkaline detergent or disinfectant.
Cleaning the filters Cleaning and drying the filters NOTE • For details on how to detach/attach the filters, see pages 9 and 10. Cleaning the pre-filter • If accumulated dust is visually observed, first use a vacuum cleaner to remove the larger dust and then rinse the filter with lukewarm water. – Cleaning interval: 2 weeks (when the product is used 24 hours every day) CAUTION • When washing the pre-filters, do not rub with a brush or any other similar tool. The superfine fibres may become damaged.
Troubleshooting Before Requesting Service If an issue occurs in the product, check the following before you contact the Service Center for assistance. Operation issue The device will not operate • Check the power supply and turn on the air purifier again. • Confirm that the power plug is plugged in properly, and then turn on the air purifier again. If it still does not operate, try a different power outlet.
Before Requesting Service Pollution level Dust sensor lens The pollution level indicator stays red. (The pollution level indicator does not seem to work) • Check the sensors for any foreign substances and clean them if necessary. • In winter season, installing and operating the product for the first time shortly after delivery may cause the air quality indicator to illuminate red.
Memo Troubleshooting English 23 ACR044-00_ACR AX3100B_AA_EN_.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A - Consumer Electronics - Mobile Phones 1-800-SAMSUNG (726-7864) 1-844-SAM-PAYS (726-7297) www.samsung.com/us/support CANADA 1-800-SAMSUNG(726-7864) 1-844-SAM-PAYS (726-7297) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) ACR044-00_ACR AX3100B_AA_EN_.
