Use and Care Manual

19
English
Cleaning
Cleaning the air purifier exterior
• Dampen a soft cloth with lukewarm water and wring it out, and then wipe the product exterior with it.
• Use cotton swabs to wipe the grooves on the front panel.
• If it is hard to remove dust on the front panel, remove the panel and wash it with water.
CAUTION
• Do NOT wipe the product with an alkaline detergent or disinfectant.
• Do NOT wipe the product surface with sulphuric acid, hydrochloric acid or organic solvent (e.g., thinner, kerosene,
acetone). Do NOT attach a sticker to the surface. The product surface may become damaged.
Cleaning the sensor unit
Dust
sensor
lens
• Use a cotton swap to carefully wipe the dust sensor lens.
If sensor is contaminated with either dust or other foreign
material, a high PM concentration may be detected.
CAUTION
• Do NOT put dust into the sensor inlet.
Be sure to disconnect the power plug from the socket before cleaning the product.
Cleaning the product
Cleaning
ACR044-00_ACR AX3100B_AA_EN_.indd 19ACR044-00_ACR AX3100B_AA_EN_.indd 19 2022-03-21 오전 9:24:142022-03-21 오전 9:24:14