Samsung Air Purifier User Manual AX350*935** • Thank you for purchasing this Samsung Air Purifier. • Before operating this unit, please read this manual carefully and retain it for future reference. DB68-11173A-01_IB_ACR AX9500A_Small PET_AA_EN_.
Contents Safety Information 4 Safety Information 4 Package Contents 8 Accessories 8 Air Purifier Overview 9 Front of main unit / Rear of main unit 9 Button unit / Display 10 Connecting the power adapter / Removing the power adapter 11 Removing the filters 12 Attaching the filters 14 Attaching the pet mesh filter 16 Using the Air Purifier 19 Turning on/off the air purifier / Changing the operation mode 19 Lock function / Filter replacement reminder 20 Air outlet setting / Checking
The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model's CADR for smoke and the electrical energy it consumes, or CADR/Watt.
Safety Information READ AND SAVE THESE INSTRUCTIONS California Proposition 65 Warning (US) Safety Information WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. These safety precautions are for owner's safety and preventions of property damage. Therefore, please read this manual thoroughly before using your product. WARNING Hazards or unsafe practices that may result in severe personal injury or death.
Safety Information Keep a safe distance from surrounding objects. • Clear space from each side: at least 24 inches and the rear: at least 10 inches • The space is necessary to ensure efficient air intake and proper purification. • Make sure that the inlet and outlet are not covered. Make sure that the power cord is not pressed under the product. • Follow instructions to avoid electric shock or fire.
Safety Information Safety Information FOR USING WARNING If the product is exposed to water, immediately disconnect it from the power source and contact your local Samsung Service Center. • Follow instructions to avoid electric shock or fire. If you notice a noise, burning smell or smoke from the product, immediately stop using it and contact your local Samsung Service Center. • Follow instructions to avoid electric shock or fire. If there is gas leakage (e.g.
• Follow instructions to avoid electric shock, fire, malfunction or injury. Safety Information If any of the electric components inside the air purifier has contacted liquid or water, disconnect the product from the power source and contact your local Samsung Service Center. • Follow instructions to avoid electric shock or fire. Do NOT attempt to repair or modify the product. • Use only the standard rated fuse. CAUTION Keep your air purifier at least 7 feet away from a TV or other audio/visual media.
Package Contents Package Contents Accessories Package Contents Pre-filter PET Deodorization Filter ¹⁾ Dust Collecting Filter ¹⁾ Pet mesh filter (5 ea) ²⁾ User Manual Power adapter ¹⁾ The pet deodorization filter and dust collecting filter cannot be reused by washing them with water. ²⁾ The Pet Mesh Filter can be equipped to capture pet hair. (according to the user's preference) NOTE • Do NOT use types of filters other than those originally supplied with the product.
Air Purifier Overview Air Purifier Overview This image is a representative image. The product design and specifications are subject to change without notice for the purpose of improving quality.
Air Purifier Overview Button unit 01 02 03 Smart PM10 5 Air Purifier Overview 01 Mode button 02 Power button • Short press: Changes the operation mode (Smart, High, Wind-Free, Sleep, Pet) • 3-second press: Resets the filters • 5-second press: Activates/deactivates the AP • Short press: Turns on/off the device • 3-second press: Locks/unlocks the device (When the device is locked/unlocked, the button is shown for 5 seconds on the front display.
Connecting the power adapter To use the air purifier, first connect the power adapter to the main unit. Check the top/bottom of the power adapter, and then connect it to the port on the rear bottom of the product. • Push the power adapter all the way in until it clicks into place. NOTE • The product will not work if you do not push the power adapter all the way in. CAUTION Removing the power adapter Air Purifier Overview • Exercise caution to ensure that the adapter is not damaged.
Air Purifier Overview Removing the filters Before using the consumable filters for the first time or a new filter for replacement, be sure to remove the plastic packaging from the filters. To detach a filter, first be sure to remove the power plug. STEP 1 Opening the rear panel • Hold both upper sides of the rear panel. Gently lift and pull the panel towards yourself to remove it. • Remove the clip wire from the rear of the main unit.
STEP 4 Remove the dust collecting filter. PET Deodorization Filter emove the plastic packaging from the pet STEP 5 R deodorization filter and dust collecting filter. Air Purifier Overview Dust Collecting Filter English 13 DB68-11173A-01_IB_ACR AX9500A_Small PET_AA_EN_.
Air Purifier Overview Attaching the filters When attaching the filters, refer to the order of inserting filters shown in the label attached to the inside of the filter unit. STEP 1 Attaching the dust collecting filter 2 1 • Put (②) the corner of the filter behind the clip (①) at the bottom of the main unit to fasten the filter. • Confirm that the filter attachment direction is correct before attaching it.
STEP 4 Closing the rear panel 1 2 • Attach the clip wire (①) to the rear of the main unit. • Insert the tabs on the panel into the slots (②) at the bottom of the main unit, and then press the top center of the panel to fasten it. STEP 5 Turning off the filter replacement reminder after replacing filters ] button for more than NOTE • The filter replacement reminder displays “Filter Reset needed” on the front display and plays an audible alarm.
Air Purifier Overview Attaching the pet mesh filter * The Pet Mesh Filter can be equipped to capture pet hair. (according to the user's preference) STEP 1 Opening the rear panel • Hold both upper sides of the rear panel, and pull the panel towards yourself. • Remove the clip wire from the rear of the main unit. Air Purifier Overview STEP 2 Remove the pre-filter STEP 3 T aking the new pet mesh filter out of the plastic packaging • Use scissors to cut off the top of the zipper bag.
STEP 5 Attaching the pre-filter • Insert the tabs on the filter into the slots at the bottom of the main unit. STEP 6 Closing the rear panel 1 Air Purifier Overview 2 • Attach the clip wire (①) to the rear of the main unit. • Insert the tabs on the panel into the slots (②) at the bottom of the main unit, and then press the top center of the panel to fasten it. English 17 DB68-11173A-01_IB_ACR AX9500A_Small PET_AA_EN_.
Air Purifier Overview Using the filters Air Purifier Overview • When using the device for the first time after purchase, you may experience some subtle odour from the unused filters. – This will disappear naturally after using the device for a day or two. • The filter cleaning and replacement cycles may vary depending on the environment in which the device is used. • The filter replacement reminder lamp illuminates when the maximum filter use duration is reached, based on the device uptime.
Using the Air Purifier If you hear a chime sound when you connect the power plug, it means that the power is connected properly. Turning on/off the air purifier • The device turns on with a chime sound, and starts operation in Smart mode. – Immediately after the device starts operation, a welcome message, app linkage reminder and 'sensor ready' indicator are displayed for 3 seconds each in sequential order. After that, the air quality colour, PM levels and operation mode are displayed.
Using the Air Purifier Lock function Use this function to lock all buttons to prevent the buttons from being pressed by mistake or by children during operation of the device. • To lock all buttons, press and hold the [ ] button for more than 3 seconds. A chime sound is played, the 'lock' icon is shown on the front display for 5 seconds and then all buttons are locked. • When the Lock function is on, all buttons are disabled and cannot be selected.
Air outlet setting While in Smart mode with high fan speed, change the number of air outlets if necessary. 5-second press Fan speed Mode High Medium Low 3 outlets Smart High fan speed 1 outlet / 3 outlets 3 outlets 1 outlet 1 outlet 1 outlet Smart PM10 125 Example of GAS level indication Smart GAS NOTE • When the fan speed is Medium or Low while in Smart mode, the number of air outlets does not change automatically.
Using the Air Purifier NOTE Using the Air Purifier • PM concentrations can be affected by the environmental conditions in which the device is used (e.g., there is a construction site or road nearby, the device is used near a fabric sofa, a vacuum cleaner is used or bedding/clothes are arranged around the device).
Cleaning and Maintenance Be sure to disconnect the power plug from the socket before cleaning the product. Cleaning the air purifier exterior • Dampen a soft cloth with lukewarm water and wring it out, and then wipe the product exterior with it. • Use cotton swabs to wipe the grooves on the rear panel. • If it is hard to remove dust on the front or rear panel, remove the panel and wash it with water. CAUTION • Do NOT wipe the product with an alkaline detergent or disinfectant.
Cleaning and Maintenance 2 LL PU 1 STEP 4 Attaching the front mesh • Attach the front mesh to the front panel as follows: – Insert the tabs on the front mesh into the slots (①) at the bottom of the panel, and then push the areas numbered ② at the top of the mesh. LL PU STEP 5 Attaching the front panel 1 2 • Attach the clip wire (①) to the front of the main unit. • Insert the tabs on the panel into the slots (②) at the bottom of the main unit, and then press the top center of the panel to fasten it.
Cleaning and drying the filters NOTE • For details on how to detach/attach the filters, see pages 12 and 16. Cleaning the pet mesh filter ¹⁾ and pre-filter • If accumulated dust is visually observed, first use a vacuum cleaner to remove the larger dust and then rinse the filter with lukewarm water. – Cleaning interval: 2 weeks (when the product is used 24 hours every day) CAUTION • When washing the pre-filters, do not rub with a brush or any other similar tool. The superfine fibres may become damaged.
SmartThings app To use the SmartThings app, connect the product to the network in the sequence described below. The images shown may differ depending on your smartphone model, OS version and manufacturer. You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE, 5G or more wireless networks.
2 Registering your Samsung account • A Samsung account is required to use the SmartThings app. To create your Samsung account and log in to your account, follow the instructions displayed on the SmartThings app. You do not need to install an additional app. • Select manually: Air purifier > Samsung • Scan: [Air purifier] Samsung By device type Air purifier Select Select NOTE • If you already have a Samsung account, log in to the account.
SmartThings app NOTE • For the security protocols for wireless/wired access points, WPA-PSK and WPA2-PSK are recommended. For the authentication methods, AES is recommended. New Wi-Fi authentication specifications and Wi-Fi non-standard authentication methods are not supported. • The product supports the IEEE802.11 b/g/n (2.4 GHz) communication protocol. (Samsung recommends IEEE802.11n.
Before Requesting Service If an issue occurs in the product, check the following before you contact the Service Center for assistance. Operation issue The device will not operate • Check the power supply and turn on the air purifier again. • Confirm that the power plug is plugged in properly, and then turn on the air purifier again. If it still does not operate, try a different power outlet. • Confirm that the front panel is closed properly.
Before Requesting Service Odours • An air purifier sucks in and circulates indoor air. If you use it in a closed space for a prolonged period of time, odours generated in your home can saturate the filters. – Remove the pet mesh filter, pet deodorization filter and dust collecting filter, and smell them at close range to check whether they are saturated with odours. If saturated, wash or replace them. You will be charged for replacing the filters regardless of the remaining warranty term.
Air quality The fan speed does not change when the air quality level changes • Switch the product to Smart mode. While in High (fan speed), Sleep or Wind-Free mode, the fan speed does not change automatically. – The fan speed also does not change automatically when you switch the product to Smart Sleep mode after turning on Sleep mode using the SmartThings app while in Smart mode. Turn off Sleep mode. The PM10, PM2.5, PM1.0 levels do not change from Good (05).
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A - Consumer Electronics - Mobile Phones 1-800-SAMSUNG (726-7864) 1-844-SAM-PAYS (726-7297) www.samsung.com/us/support CANADA 1-800-SAMSUNG(726-7864) 1-844-SAM-PAYS (726-7297) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) DB68-11173A-01_IB_ACR AX9500A_Small PET_AA_EN_.