APH450PG PH45ZV ENGLISH OWNER’S INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’UTILISATION FRANÇAIS SPLIT-TYPE PACKAGED AIR CONDITIONER (Cool and Heat) ACONDICIONDOR DE AIRE COMPACTO SISTEMA SPLIT (Refrigeración y Calefacción) CLIMATISEUR EMBALLÉ DE TYPE SÉPARÉ (Refroidissement et Chauffage) E S F DB68-00078A(2)
Safety Precautions The following safety precautions must be taken when using your air conditioner. E-2 1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials over it. 2 NEVER spill liquids of any kind into the indoor unit. Should this happen, turn the power switch off and contact your installation specialist. 3 Do NOT insert anything between the air outlet blades as the inner fan may be damaged and you may be hurt.
ENGLISH Contents ◆ PREPARING YOUR AIR CONDITIONER Safety Precautions ............................................................................................. ■ View of the Indoor unit & Outdoor unit ............................................................... ■ Remote Control - Buttons .................................................................................. ■ Control Panel .....................................................................................................
View of the Indoor unit and Outdoor unit AIR FLOW (DIRECTION) ADJUSTING BLADE AIR OUTLET ELECTRIC HEATER (Option) (The electric heater is located inside) CONTROL PANEL AIR FILTER REMOTE CONTROL CASE AIR INLET GRILLE To disassemble the air inlet grille ● Hold the upper part of the air inlet grille, and then pull it lightly forward.
Remote Control - Buttons Operating mode selection - COOL - HEAT - TURBO - FAN Fan speed adjustment buttons On/Off ( ENGLISH Temperature adjustment buttons ) button Air flow swing button Control Panel Fan Speed adjustment Fan Speed display Time/Temperature display Operating Light Remote control Sensor On/Off( ) Button Power Light Time/Temperature Selection Time or Temperature adjustment Operating Mode Selection Auxiliary Heater Switch (option) Timer adjustment E-5
Getting Started You have just purchased a packaged air conditioner and it has been installed by your installation specialist. Your Owner's Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit's features.
Inserting the Remote Control Batteries You must insert or replace the remote control batteries when: Note 1 ENGLISH ◆ You purchase the air conditioner ◆ The remote control does not work correctly Use two LR03(AAA) 1.5V batteries. Do not use old batteries, or different kinds of batteries together. Batteries may be completely discharged after 12 months, even if they have not actually been used.
Setting the Time You can set the time when you purchas the air conditioner. Note 1 Be sure to reset the time when you change clocks from standard todaylight saving time and vice versa. Press the TIME/TEMP. SELECT button. Result: 2 The TIME indicator flashes. To set the current time, press the TIME/TEMP. ▲or ▼ buttons. then ... To ... Increase the time in one-minute intervals Press the (▲) button. Increase the time in ten-minute intervals Hold down the (▲) button.
Operating Preparation 1 Remove a protective cover of the outdoor unit. 2 Turn the power switch on. ENGLISH Look around the indoor and outdoor units. Confirm if any obstacles that may prevent the air flow are present near the air conditioner. ON IMPORTANTE To operate the unit, the power switch is fitted to the wall must be set to ON. Using the Control Panel on the Indoor unit You can operate with indoor unit when you do not wish to or cannot operate the air conditioner with the remote control.
Selecting the Automatic Operating Mode You can start the air conditioner in AUTO mode by pressing the MODE button on the control panel. 1 If necessary, press the ON/OFF( ) button. Result: ◆ The power indicator on the control panel comes on. ◆ The indoor unit beeps twice. ◆ The operation mode previously set is displayed. ◆ The air conditioner starts up in the mode selected when the unit was last used.
Cooling Your Room 1 If necessary, press the ON/OFF( ENGLISH You must select the COOL mode if you wish to adjust the: ◆Cooling temperature ◆Fan speed when cooling ) button. Result: ◆ The power indicator on the control panel comes on. ◆ The indoor unit beeps twice. ◆ The operation mode previously set is displayed. ◆ The air conditioner starts up in the mode selected when the unit was last used.
Heating You Room You must select the Heat mode if you wish to adjust the: ◆ Heating temperature ◆ Fan speed when heating ◆ Auxiliary Heater (option) 1 If necessary, press the ON/OFF( ) button. Result: ◆ The power indicator on the control panel comes on. ◆ The indoor unit beeps twice. ◆ The operation mode previously set is displayed. ◆ The air conditioner starts up in the mode selected when the unit was last used.
Changing the Room Temperature Quickly The turbo function cooling/heating is used to cool or heat your room as quickly as possible. Example : You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. ENGLISH The turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. The turbo function can be controlled by using remote control.
Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary, press the ON/OFF( ) button. Result: ◆ The power indicator on the control panel comes on. ◆ The indoor unit beeps twice. ◆ The operation mode previously set is displayed. ◆ The air conditioner starts up in the mode selected when the unit was last used. 2 If the FAN indicator is not displayed, press the MODE button one or more times until it appears.
Adjusting the Air Flow Direction Horizontally 1 Remote control ENGLISH Depending on the position of the indoor unit, you can adjust the position of the air flow blades on the top of the unit, thus increasing the efficiency of the air conditioner. You can controll by using remote control. Press the AIR SWING button on the remote control. Result: ◆ The blades are moved between right and left. 2 To stop the blades, press the AIR SWING button again.
Setting the Off Timer The Off Timer enables you to set the air conditioner to switch off automatically after a given period of time, by pressing one single button. The unit can be switched off automatically after one hour, two hours, three hours, four hours or five hours. You can controll by using remote control. 1 If necessary, press the ON/OFF( mode. 2 Press the TIMER button.
ally: Operating Recommendations Topic Recommendation Heating performances The heat pump inside the air conditioner absorbs heat from outside air and brings it indoors. If the temperature of the outside air drops, the air conditioner will heat less. If you find that the room is not warm enough, set the Auxiliary Heater switch to the ‘ON’ position (option) or use an additional heating appliance.
Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges, within which the air conditioner can be used. Mode Outdoor Temperature Indoor Temperature Indoor Humidity Heating 0°C to 21°C approx. 28°Cor less Cooling 21°C to 43°C approx. 21°C to 32°C approx. 80% or less If the unit is used for long periods at a high humidity level, water may condense on and drip from the surface of the unit.
Solving Common Problems Problem Explanation / Solution The air conditioner does not operate at all ◆ Check that the power switch is turned ON. ◆ Check that the power light on the control panel is on; if necessary, press ON/OFF( ). ◆ Check whether the timer operation function stops. The air conditioner does not operate with the remote control ◆ Check that there are no obstacles between you and the indoor unit. ◆ Check the remote control batteries.
THIS AIR CONDITIONER IS MANUFACTURED BY: ESTE ACONDICIONADOR DE AIRE ES FABRICADO POR: CE CLIMATISEUR EST FABRIQUÉ PAR: ELECTRONICS Printed in Korea