BD-C7900 Blu-ray Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
Key features Blu-ray Disc Features Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. Furthermore, a Blu-ray Disc has the same familiar size and look as a DVD. The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below.
Safety Information 02 Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF ELECTRIC The explanation point within the triangle triangle is a warning sign alerting you of SHOCK, DO NOT REMOVE COVER (OR BACK) is a warning sign alerting you of important dangerous voltage inside the product. NO USER SERVICEABLE PARTS INSIDE. REFER instructions accompanying the product. SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information Note to CATV system installer This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Disc Storage & Management Disc Handling Disc Shape • Use discs with regular shapes. If an irregular disc (a disc with a special shape) is used, this player may be damaged. Holding discs • Avoid touching the surface of a disc where data has been recorded. Blu-ray Discs • Do not leave a Blu-ray Disc in the player for long periods of time. Remove the Blu-ray Disc from the player and store it in its case. • Be careful not to leave fingerprints or scratches on the surface of the Blu-ray Disc.
Safety Information • Be sure to remove the disc and turn off the player after use. • Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long periods of time. • To clean a disc, wipe it in a straight line from the inside to the outside of the disc. • Do not expose the player to any liquid. • When the AC plug is connected to a wall outlet, the player will still draw power (standby mode) when it is turned off.
Contents 2 2 Blu-ray Disc Features Blu-ray Disc Player Features Safety Information 3 4 4 5 5 Warning Precautions Important Safety Instructions Disc Storage & Management Disc Handling Getting Started 11 11 11 12 12 14 14 15 15 16 17 18 19 19 20 20 Before using the User Manual Disc Types and Contents that can be played.
Contents Connections 28 28 29 Connecting to an Audio System Case 1 : Connecting to an Audio System (HDMI and 3D Supported Amplifier) - Best Quality (Recommended) Case 2 : Connecting to an Audio System (HDMI Supported Amplifier) - Best Quality (Recommended) Case 3 : Connecting to an Audio System (Dolby Digital, DTS Amplifier) - Better Quality Case 4 : Connecting to an Audio System (2 Channel Amplifier) - Good Quality Connecting to the Network Cable Network Wireless Network 30 31 32 32 33 33 33 35 35 35 35
39 39 43 43 43 43 43 44 44 44 44 44 44 45 45 45 Network Setup Network Settings Network Status BD-LIVE Internet Connection Language Security Parental Rating Change Password General Background Front Display Power On/Off Sound Light Effect Support Software Upgrade Contact Samsung Basic Functions 46 46 46 46 46 46 46 47 47 47 47 47 47 47 48 48 48 48 48 49 49 49 49 50 Playing a Disc Playback Disc Structure Using the Disc menu/Title menu/Popup menu Using the Disc Menu Using the Title Menu Playing the Title Li
Contents Basic Functions 10 51 51 51 52 52 52 53 54 Listening to Music Buttons on the Remote Control used for Music Playback Playing an Audio CD (CD-DA)/MP3 Repeat an Audio CD (CD-DA)/MP3 Playlist Playing back a Picture Playing a JPEG Disc Using the TOOLS button Playing back a USB Storage Device Notes on the USB connection Network Services 55 55 57 60 62 62 62 Using Internet@TV Getting Started with Internet@TV Settings Samsung Apps BD-LIVE™ Software Upgrade Notification Using the AllShare Function Ap
Getting Started 03 Before using the User Manual Term Logo Icon h � Z BD-ROM BD-RE/-R DVD-VIDEO Getting Started Disc Types and Contents that can be played. Definition This indicates a function available on a BD-ROM. This indicates a function available on a BD-RE/-R disc recorded in the BD-RE format. This indicates a function available on a DVD-VIDEO. DVD-RW(V) DVD-R � DVD+RW This indicates a function available on recorded DVD+RW or DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized.
Getting Started ✎ NOTE ▪ Some commercial discs and DVD discs purchased ▪ ▪ ▪ ▪ ▪ ▪ ▪ outside your region may not be playable with this player. When these discs are played, either “This disc can not be played.” or ““Cannot read this disc. Please check the regional code of the disc.” will be displayed. Playback may not work for some types of discs, or when specific operations, such as angle change and aspect ratio adjustment, are being performed.
Audio CD (CD-DA) • This player can play back CD-DA format audio CD-RW/-R discs. • The player may not be able to play some CD-RW/-R discs due to the condition of the recording. CD-RW/-R • Use a 700MB (80 minute) CD-RW/-R disc. If possible, do not use a 800MB (90 minute) or above disc, as the disc may not play back. • If the CD-RW/-R disc was not recorded as a closed session, you may experience delays when playing back the beginning of the disc or all recorded files may not play.
Getting Started Region Code Both the player and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this player is displayed on the rear panel of the player. Disc Type Blu-ray Region Code a North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia. b Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.
03 Logos of Discs that can be played 3D Blu-ray Disc DTS-HD Master Audio DivX BD-LIVE Dolby TrueHD NTSC broadcast system in U.S.A, Canada, Korea, Japan Java Getting Started Blu-ray Disc Accessories Check for the supplied accessories below.
Getting Started Front Panel a b c d e f g h 1 DISC TRAY Opens to accept a disc. 3 DISPLAY Displays the playing status, time, etc. REMOTE CONTROL SENSOR Detects signals from the remote control. OPEN/CLOSE BUTTON Opens and closes the disc tray. STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. POWER BUTTON Turns the player on and off. USB HOST A USB memory flash stick can be connected here and used as storage when connected to BD-LIVE.
b Getting Started a 03 Front Panel Display c d 1 2 3 4 IN DISC INDICATOR Lights when a disc is inserted or played back. CURRENT TIME AND STATUS INDICATOR Displays the play time and the current status. 3D DISC INDICATOR Lights when 3D disc is inserted or played back. WIFI INDICATOR Lights when a wireless network is connected.
Getting Started Rear Panel a b c d e g f 1 DIGITAL AUDIO OUT (OPTICAL) Connects to a Receiver. LAN Can be used for network based services (See pages 55~63), BD-LIVE, and software upgrades using a network connection. HDMI OUT 1 Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture or to your receiver for the best quality sound.
03 Remote Control Turn the player on and off. To open and close the disc tray. POWER TV POWER BONUSVIEW SOURCE Turn the TV on and off. (To operate your TV, please refer to page 20) After setup, allows you to set the input source on your TV. Press to use Bonusview function. Press numeric buttons to operate options. Press to switch the Blu-ray Disc/DVD’s subtitle language. SUBTITLE Use this to access various audio functions on a disc (Blu-ray Disc/DVD). AUDIO Press to skip backwards or forwards.
Getting Started Setting the Remote Control You can control certain functions of your TV with this remote control. Button TV POWER TV SOURCE TV VOL (+/–) Function Used to switch the television on and off. Used to select an external source connected to the TV. Used to adjust the volume of the television. TV CH (,/.) Used to select the desired channel. TV MUTE ✎ Used to toggle the sound on and off. NOTE ▪ The functions listed above will not necessarily work on all televisions.
Connections 04 Connecting to a TV 1. Using an HDMI cable, connect the HDMI OUT 1 terminal on the rear of the player to the HDMI IN terminal of your TV. 2. Turn on the player and TV. 3. Press the input selector on your TV remote control until the HDMI signal from the player appears on your TV screen. • If you have set the player's remote control to operate your TV (See page 20), press the TV SOURCE button on the remote control and select HDMI as the external source of the TV.
Connections Case 2 : Connecting to a TV with a DVI Cable - Best Quality (Recommended) 1. Using an HDMI-DVI cable, connect the HDMI OUT 1 terminal on the rear of the player to the DVI IN terminal of your TV. 2. Using an audio cable, connect the AUDIO OUT (red and white) terminals on the rear of the player to the AUDIO IN (red and white) terminals of your TV. 3. Turn on the player and TV. 4.
1. Using Component video cables, connect the COMPONENT OUT terminals on the rear of the player to the COMPONENT IN terminals of your TV. 2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player to the AUDIO IN (red and white) terminals of your TV. 3. Turn on the player and TV. 4. Press the input selector on your TV remote control until the “COMPONENT” signal from the player appears on the TV screen.
Connections Case 4 : Connecting to a TV with Video cables - Good Quality 1. Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white) terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of your TV. 2. Turn on the player and TV. 3. Press the input selector on your TV remote control until the “VIDEO” signal from the player appears on the TV screen.
04 Connecting to an Audio System Case 1 : Connecting to an Audio System (HDMI and 3D Supported Amplifier) - Best Quality (Recommended) 1. Using an HDMI cable, connect the HDMI OUT 1 terminal on the rear of the player to the HDMI IN terminal of your amplifier. 2. Using an HDMI cable, connect the HDMI OUT terminal of the amplifier to the HDMI IN terminal of your TV. 3. Turn on the player, TV, and amplifier. 4.
Connections Case 2 : Connecting to an Audio System (HDMI Supported Amplifier) - Best Quality (Recommended) 1. Using an HDMI cable, connect the HDMI OUT 1 terminal on the rear of the player to the HDMI IN terminal of your TV. 2. Using an HDMI cable, connect the HDMI OUT 2 terminal on the rear of the player to the HDMI IN terminal of your amplifier. 3. Turn on the player, TV, and amplifier. 4. Press the input select button of the amplifier to select the external input and hear sound from the player.
1. Using an optical cable, connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the player to the DIGITAL AUDIO IN (OPTICAL) terminal of your amplifier. 1. Using audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player to the AUDIO IN (red and white) terminals of your amplifier. 3. Turn on the player, TV, and amplifier. 3. Turn on the player, TV, and amplifier. 2.
Connections Connecting to the Network This player lets you view network based services (See pages 55~63) such as Internet@TV and BD-LIVE, as well as receive software upgrades through a network connection. We recommend using an AP (Access Point) or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Cable Network 1.
04 Wireless Network Connections You can connect your player to your network with a Wireless IP sharer. A wireless AP/IP router is required to make a wireless network connection. To set the network options, see pages 39~43. Broadband service Wireless IP sharer Networking with PC for AllShare function (See pages 62~63) ✎ NOTE ▪ To use a wireless network, your player must be connected to a wireless IP sharer.
Setup Before Starting (Initial Settings) 1. Turn on your TV after connecting the player. (When the player is connected to TV for the first time, the player will turn on automatically and display the Initial Settings screen.) Initial Settings I On-Screen Language Select a language for the on-screen displays. English 5. Press the ◄► buttons to select the desired Network Settings : Wired, Wireless or PBC (WPS), and then press the ENTER button.
If the player is left in the stop mode more than 5 minutes without being used, a screen saver appears on your TV. If the player is left in the screen saver mode for more than 25 minutes, the power AUDIO automaticallySUBTITLE turns off. 1. Press the POWER button. The Home Menu will appear. • Home Menu You Tube internet radio service Please activate Internet@TV to enjoy a variety of Internet Services.
Setup Display You can configure various display options such as the TV Aspect, Resolution, etc. 3D Select whether to play a Blu-ray Disc with 3D contents in 3D Mode. TV Screen Size Lets you enter the actual screen size of your TV so that the player can adjust the image according to the screen size and display an optimal 3D image. (The maximum allowed screen size is 116 inches for this player.
• 16:9 Normal • 16:9 Wide The player plays 4:3 source movies in 4:3 Pillar-box (black bars on sides of picture) on your wide scren TV if you select 16:9 normal. Select to view a movie with an aspect ratio of 16:9 (wide screen) in full 16:9 wide screen on your widescreen TV. • 4:3 Letter Box • 4:3 Pan-Scan If you have a TV with a 4:3 ratio screen, select when you want to see full 16:9 ratio images supplied by a Blu-ray Disc/DVD. Black bars will appear at the top and bottom of the screen.
Setup Resolution according to the output mode • Blu-ray Disc playback Output Setup HDMI connected HDMI not connected HDMI Mode Component/VIDEO Mode Component Mode VIDEO Mode 1080p@60F 480i - - Auto Optimal Resolution 1080p/1080i, Movie Frame(24Fs) on 1080p@24F 480i - - 1080i, Movie Frame(24Fs) off 1080i 480i 1080i 480i 480p 480p 480i 480p 480i 1080p, Movie Frame(24Fs) off 720p 480i 720p 480i - • DVD playback Output Setup HDMI connected Component/VIDEO Mode 1080p@60F
Movie Frame (24Fs) Setting the Movie Frame (24Fs) feature to On allows you to adjust the player's HDMI output to 24 frames per second for improved picture quality. You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. This menu can only be selected in 1080i or 1080p HDMI output resolution modes. • On : Movie Frame (24Fs) functions is on. • Off : Movie Frame (24Fs) functions is off.
Setup Digital Output Selection Setup Connection PCM Dolby Digital Dolby Digital Audio Stream Plus on Blu-ray Dolby TrueHD Disc DTS DTS-HD HRA DTS-HD MA PCM Audio Stream Dolby Digital on DVD DTS Definition for Blu-ray Disc Bitstream (Re-encode) PCM Any HDMI Receiver Up to 7.1ch Up to 5.1ch Optical HDMI Receiver or Optical HDMI Receiver PCM 2ch DTS re-encoded Dolby Digital PCM 2ch English DTS re-encoded PCM Dolby Digital Plus Optical PCM 2ch Dolby Digital Up to 7.
Dynamic Range Control You can listen at low volumes but still hear dialog clearly. This is only active when a Dolby Digital signal is detected. • Auto : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack. • Off : Turn Dynamic Range Control off. • On : Choose to listen to a movie at a lower volume without losing clarity of dialog. Downmixing Mode Select whether to downmix the multi-channel audio into fewer channels.
Setup System Initial Settings By adjusting the Initial Settings, you can set the language, TV aspect ratio and Network Settings, etc. For more information on the settings, refer to the corresponding section in this user manual. (See pages 30~45) Internet@TV Screen Size Set the Internet@TV Screen to the optimal size. • Size 1 : Display smaller application icons. You may see some black on the sides of the screen. • Size 2 : Display normal application icons. The image may be too large for your TV screen.
DivX(R) Deactivation Select to get a new DivX(R) registration code. Settings Display Audio System Network Language Security General Support Settings Clock Clock Mode : Auto Clock Set Time Zone \ : GMT + 0:00 DST : Off > Move " Enter ' Return • Clock Mode : You can set it to Auto or Manual. If you select Manual, the Clock Set menu is activated and DST is deactivated. • Clock Set : You can specify the current time and date manually.
Setup Wired Network Setting Up a Wired Connection - Manual 1. In the Network Settings menu, press the ▲▼ buttons to select Network Setting, and then press the ENTER button. The Internet Protocol Setup screen appears. 2. Press the ► button, then select Auto or Manual, and then press the ENTER button. Setting Up a Wired Connection - Auto 1. If you selected Auto, the Network Function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically.
Wireless Network You can setup the wireless connection three ways: • Using PBC (WPS) • Using the Auto Network Search function. • Manually. Each method is described below. Setting Up the Wireless Network Connection - PBC (WPS) The easiest way to set up the wireless network connection is using the PBC (WPS) function. If your wireless router has a PBC (WPS) button, follow these steps: 1. In the Network Settings menu, press the ▲▼ buttons to select Network Setting, and then press the ENTER button.
Setup 5. In the list of networks, press the ▲▼ buttons to select a network, and then press the ENTER button. 6. If the PIN/Security pop-up appears, go to Step 7. If the Network Connecting Screen appears, go to Step 11. 7. Press the ▲▼ buttons to select PIN or Security. For most home networks, you would select Security (for Security Key). 8. On the Security screen, enter your network’s Pass Phrase.
8. Press the ▼ button to go to the first DNS entry field. Enter the numbers as above. 9. When done, press the ▲ button to return to Access Point Selection. Select the network, and then press the ENTER button. ▪ When the player uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transferred data to check if the disc is valid and sends the certificate back to the player. The Internet connection may be restricted while you are using BD-LIVE contents. 10.
Setup Settings Display Audio System Network Language Security General Support Parental Rating Change Password Off 8 (Adult) 7 6 5 4 3 2 | Change Password Change the 4-digit password used to access security functions. If you forgot your password 1. Remove the disc. 2. Press and hold the STOP ( ) button on the front panel for 5 seconds or more. All settings will revert to the factory settings. ✎ NOTE ▪ When the factory default settings are restored, all stored user BD data is deleted.
The Software Upgrade menu allows you to upgrade software for performance improvements or additional services. You can check the current software version, upgrade using the Internet and set the Auto upgrade notification. If the player is properly connected to the network by cable or wirelessly, the player automatically connects to Samsung's website each time it is turned on and downloads update files if any valid upgrade exists.
Basic Functions Playing a Disc Playback Using the Disc menu/Title menu/ Popup menu 1. Press the OPEN/CLOSE ( open the disc tray. ) button to 3. Press the OPEN/CLOSE ( close the disc tray. ) button to 2. Place a disc gently into the tray with the disc’s label facing up. 4. Press the PLAY ( ) button. Playback related buttons PLAY ( ) STOP ( ) PAUSE ( Stops playback. • If you press the button once, the stop position is memorized.
1. During playback, press the POPUP MENU button on the remote control. 2. Press the ▲▼◄► buttons or ENTER button to select the desired menu. ✎ NOTE ▪ Depending on the disc, the menu items may differ or this menu may not be available. Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching for a Desired Scene hzZyx • During playback, press the SEARCH ( ) button.
Basic Functions Repeat Playback Repeat the Title or Chapter hzZy Repeat the disc title or chapter. Depending on the disc, the Repeat function may not be available. 1. During playback, press the REPEAT button on the remote control. 2. Press the ▲▼ buttons to select Chapter or Title, then press the ENTER button. Repeat > Chapter 4. Press the ENTER button at the point where you want repeat play to stop (B). 5. To return to normal play, press the REPEAT button again. 6. Press the ENTER button.
You can also operate this function by pressing the AUDIO button on the remote control. 1. During playback, press the TOOLS button. ▪ ▪ 2. Press the ▲▼ buttons to select Audio. ▪ ✎ NOTE ▪ The ◄► indicator will not be displayed on the ▪ 3. Press the ◄► buttons to select the desired audio language. ▪ ▪ ▪ ▪ ▪ screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings. Information about the main feature/BONUSVIEW mode is also displayed if the Blu-ray Disc has a BONUSVIEW section.
Basic Functions Listening to Music • Dynamic : Choose this setting to increase Sharpness. • Normal : Choose this setting for most viewing applications. • Movie : This is the best setting for watching movies. • User : You can adjust the sharpness and noise reduction functions respectively. Setting BONUSVIEW ow Buttons on the Remote Control used for Music Playback h You can also operate this function by pressing the BONUSVIEW button on the remote control. ! 9 3.
NUMBER buttons : During the Playlist playback, press the desired track number. The selected track is played. Playing an Audio CD (CD-DA)/MP3 1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc tray. • Audio CDs (CD-DA) play automatically. • To start an MP3 disc, press the ◄► buttons to select Music, then press the ENTER button.
Basic Functions Playing back a Picture 3. Press the ▲▼◄► buttons to move to the desired track, then press the YELLOW (C) button to check the desired track. Repeat this procedure to select additional tracks. Music Playing a JPEG Disc 1. Insert a JPEG disc into the disc tray. 3 files selected 1/2 Page TRACK 003 TRACK 001 TRACK 002 TRACK 003 TRACK 004 2. Press the ◄► buttons to select Photos and then press the ENTER button. 00:04:27 00:05:57 00:03:41 00:04:07 3.
6. Press the ◄► buttons to select the desired Videos, Music, or Photos, and then press the ENTER button. Go to Step 7. 4-1. Press the BLUE (D) button, the screen below appears. Go to Step 5-1. function, the photo file should exist in the same storage media with the music file. However, the sound quality can be affected by the bit rate of the MP3 file, the size of the photo, and the encoding method.
Basic Functions Notes on the USB connection • • • • • • • • • • • Supported devices: USB storage media, MP3 players, digital cameras, and USB card readers. Does not support folders or file names longer than 128 characters. Some USB devices and digital cameras may not be compatible with the product. Supports the FAT16, FAT32, and NTFS file systems. Supports the PTP protocol. Connect USB devices directly to the product's USB port.
Network Services Internet@TV at a Glance 2 Check the following instructions before using any network service. Recommended 1. Connect the player to the network. (See pages 28~29) My Applications 2. Configure the network settings. (See pages 39~43) Using Internet@TV Samsung Apps 6 1 2 You can also initiate this function by pressing the INTERNET@ button on the remote control. 3 Getting Started with Internet@TV 1. Move to the Home menu.
Network Services Using the Keypad ▪ Through your remote, you can use the On-Screen Keypad in several Internet@TV applications to enter text. 1 2 4 1 5 7 T9 9 tuv wxyz 0 Shift 3 6 mno 8 pqrs 2 def jkl .,– ab b Input Method ▪ ▪ 3 abc .,– ▪ Delete Ab AB 1 6 / Language ▪ ▪ 4 5 The current keypad. Use to enter characters. 1 2 Press the SUBTITLE button on the remote control to shift the input mode. : ab, Ab, AB, numbers or icons. 3 Displays the current input mode.
4. The Internet Privacy Policy screen appears. Use the ◄► buttons to move to Agree, and then press the ENTER button. 5. The Service Update screen appears and installs a number of services and applications. When done, it closes. The applications and services downloaded are listed on the Internet@TV screen. ✎ NOTE ▪ Internet@TV may close momentarily during the ▪ installation process. A number of screens appear after installation. You can press Enter to close them or let them close on their own. 6.
Network Services Reset Resets Internet@TV to the factory default settings, removes all downloaded applications and services, erases all user settings, and then automatically begins the start-up procedure. ✎ NOTE ▪ If you forgot your password, press the STOP ( ) button on the front panel of the product for more than 5 seconds with no disc inserted. Don’t use this unless absolutely necessary. Works the same as Reset.
5. When you are done, press the RETURN button. 9. When you are done, press the RETURN button. 4. If you pressed the ENTER button, repeat Steps 1 and 2 to associate another service site. Manager On this screen you can access the following functions: • Service Site : Register login information for service sites. • Change Password : Change account password. • Delete : Delete an account. Instructions for • using these functions are below. Service Site 1. On the Settings screen, select Internet@TV ID.
Network Services Service Manager Properties Lock/Unlock Samsung Apps Lock, unlock, and delete services and applications installed in Internet@TV. When a service or application is locked, you must enter the Service Password to access it. 1. On the Settings screen, select Service Manager, and then press the ENTER button. 2. On the Servioe Manager screen, use the ▲▼ arrow buttons to select an application or service. 3. Use the ◄► buttons to select Lock/Unlock, and then press Enter.
1. Use the ◄► buttons to move to the category list on the left. 2. Use the ▲▼ to highlight a category. In a few seconds, the Samsung Apps screen displays the applications in that category. 3. Use the ► button to move to the displayed applications. 4. Use the ▲▼◄► buttons to select an application, and then press the ENTER button. The Application Details screen appears describing the sevice or application. 5. Press the ENTER button. If the applications is free, it downloads.
Network Services BD-LIVE™ Using the AllShare Function Once the player is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc. AllShare lets you play music, video, and photo files located in your PC on your TV using the player. To use AllShare, you must connect the player to your PC via the network (See pages 28~29) and install the SAMSUNG PC Share Manager on the PC. To install and use Share Manager, follow these steps. 1.
AllShare Program at a Glance SAMSUNG PC Share Manager Share Server Help You Tube Please activate Internet@TV internet radio service to enjoy a variety of Internet Services. My Computer C: Document and settings Admin Name Folder 1 Size Folder 2 Folder 3 a Change Device d View Devices ✎ NOTE ▪ Depending on the performance of the external ▪ ▪ ▪ ▪ ▪ Shared Folder Kind File Folder Folder 1 Full Path C: Document and settin..
Appendix Troubleshooting Before requesting service, please check the following. PROBLEM SOLUTION No operation can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again.
SOLUTION 08 • Press the STOP ( ) button (on the front panel) for more than 5 seconds with no disc inside. All settings including the password will revert to the factory settings. Don't use this unless absolutely necessary. • When the factory default settings are restored, all the stored user BD data is deleted. If you experience other problems. • Go to the contents and find the section of the user manual that contains the explanations regarding the current problem, and follow the procedure once again.
Appendix PROBLEM BD-LIVE SOLUTION I cannot connect to the BD-LIVE server. • Check whether the network connection is successful or not by using Network Test menu. (See page 43) • Check whether a USB memory device is connected to the player or not. • The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 38) • Please check whether the BD-LIVE Internet Connection menu is set to Allow (All).
B BD Wise BD Data Management BD-LIVE BONUSVIEW Background Music C Component Cable Network Camera Angle 15 29 37 38 49 62~63 33 38 43, 62 50 52 23 28 49 D Digital Output 35~36 Dynamic Range Control 37 Downmixing Mode 37 DTS Neo:6 37 DST (Daylight Saving Time) 39 DivX 36 Disc Menu 46 Disc Structure 46 H HDMI 21, 37 HDMI Supported Amplifier 25 HDMI Deep Color 35 HDMI Audio Output 37 I Internet@TV Initial Settings JPEG M Movie Frame (24F) MP3 N Network Setup O Optimal Resolution P PCM Downs
Appendix Specifications Power Requirements AC 120V, 60Hz Weight 4 Ibs Power Consumption General Dimensions Operating Temperature Range Operating Humidity Range BD (Blu-ray Disc) DVD (Digital Versatile Disc) Disc CD : 5 inches (COMPACT DISC) CD : 3 1/2 inches (COMPACT DISC) Composite Video Video Output Video/Audio Component Video 17 (W) × 7.9 (D) × 1.7 (H) inches +41°F to +95°F 10 % to 75 % Reading Speed : 4.917m/sec Reading Speed : 3.49 ~ 4.06 m/sec. Approx.
08 Compliance and Compatibility Notice Copy Protection • Because AACS (Advanced Access Content System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
Appendix • Many Blu-ray Disc/DVD discs are encoded with copy protection. Because of this, you should only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected Blu-ray Disc/DVD discs. • This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. • Under the U.S.
08 License Appendix • Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. • Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc. Product includes software.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area ` North America Contact Center Web Site Canada Mexico U.S.A 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT IN THE US 1-800-SAMSUNG (7267864) www.samsung.com WRITE Samsung Electronics America, Inc.