User manual

44 English
Setup
Wired Network
In the Network Settings menu, press the ▲▼
buttons to select Network Settings, and then
press the ENTER button.
The Internet Protocol Setup screen appears.
Press the ► button, then select Auto or
Manual, and then press the ENTER button.
Setting Up a Wired Connection - Auto
If you selected Auto, the Network Function
acquires and fills in the values for IP Address,
Subnet Mask, etc., automatically.
NOTE
This process can take up to five minutes.
After the Network Function has acquired the
network values, press the RETURN button.
Then, run a Network Test to ensure the player
has connected to your network (See page 47).
If the Network Function does not acquire the
network values or you selected Manual, go to
the directions for Manual Setup.
1.
2.
1.
✎
▪
2.
3.
Setting Up a Wired Connection - Manual
If the Auto Setting does not work, you’ll need to
set the Network Setting values manually.
To view the Network setting values on most
Windows computers, follow these steps:
Right click the Network icon on the bottom
right of the screen.
In the pop-up menu, click Status.
On the dialog that appears, click the Support
tab.
On the Support tab, click the Details button.
The Network settings are displayed.
NOTE
When setting manually, you can only enter numbers
on the remote control.
To enter the Network settings into your player,
follow these steps:
On the Internet Protocol Setup screen, press
the ENTER button.
Press the ▲▼ buttons to select Manual, and
then press the ENTER button.
Press the ▼ button to go to the first entry field
(IP Address).
Use the number buttons on your remote to
enter numbers.
When done with each field, use the ► button
to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
Enter the IP Address, Subnet Mask, and
Gateway values.
1.
2.
3.
4.
✎
▪
1.
2.
3.
4.
5.
6.
Network Setting
Internet Protocol Setup : Auto 
IP Address :
0 0 0
0
Subnet Mask :
0 0 0
0
Gateway :
0 0 0
0
DNS : Auto
DNS Server :
0 0 0
0
> Move " Enter ' Return
Network Setting
Internet Protocol Setup : Manual 
IP Address :
0
0 0 0
Subnet Mask :
0 0 0 0
Gateway :
0 0 0 0
DNS : Manual
DNS Server :
0 0 0 0
> Move " Enter ' Return
BD-C8000-XAA-ENG-2_0703.indd 44BD-C8000-XAA-ENG-2_0703.indd 44 2010-07-03  11:53:402010-07-03  11:53:40