BD-E5300 Blu-ray™ Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
Key features Blu-ray Disc Features Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below. Video highlights The BD-ROM format supports three highly advanced video codecs, including AVC, VC-1 and MPEG-2.
CLASS 1 LASER product This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. DANGER : •• VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR) CAUTION : •• CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
•• Do not use discs printed on by label printers available on the market. •• Do not load warped or cracked discs. •• Before connecting other components to this player, be sure to turn them off. •• Do not move the player while it is playing a disc. The disc can be scratched or damaged and the player’s internal parts can be damaged. •• Do not put a flower vase filled with water or any small metal objects on the player. •• Be careful not to put your hand into the disc tray.
Getting Started Disc types your player cannot play Before using the User Manual Disc Types and Contents your player can play Content Logo VIDEO - MUSIC PHOTO ✎ NOTE Icon Definition h z Indicates a function available on a BD-ROM or BD-RE/-R disc recorded in the BD-RE format. Z � Indicates a function available on a DVD-VIDEO or recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized.
DVD-RW/-R/+R This player can play back a DVD-RW/-R/+R disc recorded and finalized with a DVD video recorder. The ability to play back may depend on recording conditions. DVD+RW •• This player can play back a DVD+RW disc recorded with a DVD Video recorder. The ability to play back may depend on recording conditions. Audio CD (CD-DA) •• This player can play back CD-DA format audio CD-RW/-R discs. •• The player may not be able to play some CD-RW/-R discs due to the condition of the recording.
Video File Support File Extension Container *.avi AVI *.mkv MKV *.wmv WMV (wmv9) *.mp4 MP4 *.mpg *.mpeg PS ••Limitations Video Codec MP4v3 H.264 BP/MP/HP VC-1 AP H.264 BP/MP/HP VC-1 AP Audio Codec MP3 Dolby Digital DTS WMA PCM MP3 Dolby Digital DTS WMA VC-1 SM MP4 (mp4v) AAC H.264 BP/MP/HP MPEG1 MPEG2 H.264 BP/MP/HP MP1, 2 Dolby Digital DTS Resolution 1920x1080 1920x1080 1920x1080 1920x1080 - Supports up to H.264 Level 4.1 and AVCHD - Does not support H.
Front Panel Rear Panel a b a c bc d e g 1 2 3 4 5 6 7 DISC TRAY REMOTE CONTROL SENSOR f Opens to accept a disc. Detects signals from the remote control. DISPLAY Displays the playing status, time, etc. OPEN/CLOSE BUTTON Opens and closes the disc tray. POWER BUTTON Turns the player on and off. USB HOST You can connect a USB memory flash stick here and use it as storage when the player is connected to BD-LIVE. You can also use the USB Host for software upgrades and MP3/JPEG/MKV/MP4 playback.
Connections Remote Control Tour of the Remote Control Turn the player on and off. Turn the TV on and off. After setup, allows you to set the input source on your TV. Press to eject a disc. TV volume adjustment. Press numeric buttons to operate options. Use to enter the disc menu. Use to enter the popup menu/title menu. Press to skip backwards or forwards. Press to search a disc backwards or forwards. Press to pause a disc. Press to stop a disc. Press to use Netflix. Press to play a disc.
B. Connecting to an Audio System •• Please turn the volume down when you turn on the AV receiver. A sudden loud sound may cause damage to the speakers and your ears. •• Please set the audio format according to the capabilities of your AV receiver. •• The position of HDMI input terminals may vary depending on your AV receiver. Please refer to the user manual of your AV receiver.
Connecting to an Audio System Connecting to a TV Option 1 : HDMI cable (not included) HDMI cable (not included) Option 1 : HDMI cable (not included) Network Broadband modem (with integrated router) Or Option 2 : Coaxial cable (not included) Router Broadband service Broadband modem Broadband service Networking with PC for AllShare function ✎ NOTE : You can only connect this unit to a network via a wired connection.
Setup Menu Navigation The Initial Settings Procedure 111 Turn on your TV after connecting the player, and then turn on the player. When you turn on the player for the first time, the player displays the Language screen. Initial Settings I On-Screen Language Select a language for the on-screen displays. English ✎ NOTE Français Deutsch Español Italiano Nederlands > Move " Select 222 Use the ▲▼ buttons on the remote to select the desired language, and then press the ENTER button.
Display Settings You can configure various display options such as the TV Aspect Ratio, Resolution, etc. TV Aspect Ratio Depending on the type of television you have, you may want to adjust the screen size setting. ••16:9 Original : Select when you connect the player to a 16:9 TV screen. The player will display all content in its original aspect ratio. Content formatted in 4:3 will be displayed with black bars on the left and right. ••16:9 Full : Select when you connect the player to a 16:9 TV screen.
✎ NOTE ▪▪ If the TV you connected to the player does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after selecting ‘Yes’, please wait for 15 seconds to return to the previous resolution. Do you want to change the resolution?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
Setup Connection Definition for Blu-ray Disc Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) Decodes the main feature audio and Outputs only the main BONUSVIEW feature audio stream audio stream so that your AV receiver together into can decode the audio PCM audio and bitstream. adds Navigation You will not hear Sound Effects, BONUSVIEW audio or then re-encodes Navigation Sound Effects. the PCM audio into DTS bitstream.
Network Setup Please contact your ISP to find out if your IP address is static or dynamic. If it is dynamic - and most are - we recommend using the Auto procedure for network setup. This is easiest and will work in the majority of cases. If it is static, you must use the manual set up procedure. Network setup directions start below. ✎ NOTE ▪▪ This unit can only be connected to a Network via a wired connection.
System Settings Initial Settings By using the Initial Settings function, you can set the language, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual (page 12). Anynet+(HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung players that have the Anynet+ feature. To operate this function, connect this player to an Anynet+ Samsung TV with an HDMI cable.
YouTube Lock Restrict the use of the YouTube service unless the 4 digit PIN is entered. •• Off : Turn Off YouTube lock. •• On : Turn On YouTube lock. Change PIN Change the 4-digit password used to access security functions. To change the PIN, follow these steps: 111 Select Change PIN, and then press the ENTER button. The Enter old PIN screen appears. 222 Enter the old PIN. If you never changed the PIN, enter the default PIN: 0000. The Enter new PIN screen appears.
If there is a new software version available, the player notifies you with a popup message. 111 To upgrade the firmware, select Yes in the Pop-up. The player turns off automatically, then restarts, and begins the download. (Never turn on the player manually here.) 222 The update progress popup appears. 333 When the update is complete, the player turns off again automatically. 444 Press the POWER button to turn on the player. ✎ NOTE ▪▪ The update is complete when the player turns off after restarting.
Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching for a Desired Scene hzZyx •• During playback, press the SEARCH ( ) button.
Selecting the Subtitle Language hZx You can also operate this function by pressing the SUBTITLE button on the remote control. 111 During playback, press the TOOLS button. 222 Press the ▲▼ buttons to select Subtitle. 333 Press the ◄► buttons to select the desired subtitle language. ✎ NOTE ▪▪ Depending on the Blu-ray Disc / DVD, you may be able to select the desired subtitle in the Disc Menu. Press the DISC MENU button.
Repeat Modes : Off Tracks on a disc are Audio CD played in the order (CD-DA)/MP3 in which they were recorded on the disc. ( ) Track Audio CD (CD-DA) Current track is repeated. ( ) One MP3 Current track is repeated. ( ) All Audio CD All tracks are (CD-DA)/MP3 repeated. ( The random option Audio CD plays a disc’s tracks ) Shuffle (CD-DA)/MP3 in random order. Playlist 111 Insert an Audio CD (CD-DA) or an MP3 Disc into the disc tray.
Playing back a USB Storage Device PANDORA HD Movies You can use the USB connection to play multimedia files (MP3, JPEG, etc) located on a USB storage device. 111 Move to the Home menu. 222 In Stop mode, connect the USB storage device to the USB port on the front panel of the player. The message “Do you want to access the device?” will be displayed. 333 Press the ◄► button to select Yes, then press the ENTER button. 444 If you have a disc in the Blu-ray player, press the RED (A) or BLUE (D) button.
Appendix PROBLEM Troubleshooting •• Press the PLAY/PAUSE ( ) button (on front panel) for more than 5 seconds with no disc inside. All settings including the password will revert to the factory settings. Don’t use this unless absolutely necessary. •• When the factory default settings are restored, all stored user BD data is deleted. If you experience other problems.
Specifications PROBLEM SOLUTION I cannot connect to the BDLIVE server. •• Check whether the network connection is successful or not by using the Network Status menu. •• Check whether the USB memory device is connected to the player. •• The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. •• Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
Compliance and Compatibility Notice NOT ALL discs are compatible •• Subject to the restrictions described below and those noted throughout this Manual, including the Disc Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs. •• Discs other than the above cannot and/or is not intended to be played by this player.
License •• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. •• Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area ` North America Contact Center Web Site Canada Mexico U.S.A 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.