BD-E5200 BD-E5300 Blu-ray™ Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
Key features Blu-ray Disc Features Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below. Video highlights The BD-ROM format supports three highly advanced video codecs, including AVC, VC-1 and MPEG-2.
This product satisfies CE regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections. IMPORTANT NOTE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug.
•• Do not use discs printed on by label printers available on the market. •• Do not load warped or cracked discs. •• Before connecting other components to this player, be sure to turn them off. •• Do not move the player while it is playing a disc. The disc can be scratched or damaged and the player’s internal parts can be damaged. •• Do not put a flower vase filled with water or any small metal objects on the player. •• Be careful not to put your hand into the disc tray.
Getting Started Disc types your player cannot play Before using the User Manual Disc Types and Contents your player can play Content Logo VIDEO - MUSIC PHOTO ✎ NOTE Icon Definition h z Indicates a function available on a BD-ROM or BD-RE/-R disc recorded in the BD-RE format. Z � Indicates a function available on a DVD-VIDEO or recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized.
DVD-RW/-R/+R This player can play back a DVD-RW/-R/+R disc recorded and finalized with a DVD video recorder. The ability to play back may depend on recording conditions. DVD+RW •• This player can play back a DVD+RW disc recorded with a DVD Video recorder. The ability to play back may depend on recording conditions. Audio CD (CD-DA) •• This player can play back CD-DA format audio CD-RW/-R discs. •• The player may not be able to play some CD-RW/-R discs due to the condition of the recording.
Video File Support File Extension Container *.avi AVI Video Codec DivX 3.11/4.x/5.1/6.0 MP4v3 H.264 BP/MP/HP *.mkv MKV *.wmv WMV (wmv9) *.mp4 MP4 *.mpg *.mpeg PS VC-1 AP DivX 5.1/6.0 H.264 BP/MP/HP Audio Codec MP3 Dolby Digital DTS WMA PCM MP3 Dolby Digital DTS VC-1 AP WMA VC-1 SM MP4 (mp4v) AAC H.264 BP/MP/HP MPEG1 MPEG2 H.264 BP/MP/HP MP1, 2 Dolby Digital DTS ••Limitations Resolution 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 - Supports up to H.264 Level 4.
Front Panel Rear Panel a b a c bc d e g 1 2 3 4 5 6 7 DISC TRAY REMOTE CONTROL SENSOR f Opens to accept a disc. Detects signals from the remote control. DISPLAY Displays the playing status, time, etc. OPEN/CLOSE BUTTON Opens and closes the disc tray. POWER BUTTON Turns the player on and off. USB HOST You can connect a USB memory flash stick here and use it as storage when the player is connected to BD-LIVE.
Connections Remote Control Tour of the Remote Control Turn the player on and off. Turn the TV on and off. After setup, allows you to set the input source on your TV. TV volume adjustment. Press to eject a disc. Press numeric buttons to operate options. Connecting to a TV with an HDMI Cable - Best Quality 111 Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN terminal of your TV. See page 11. 222 Turn on the player and TV.
B. Connecting to an Audio System •• Please turn the volume down when you turn on the AV receiver. A sudden loud sound may cause damage to the speakers and your ears. •• Please set the audio format according to the capabilities of your AV receiver. •• The position of HDMI input terminals may vary depending on your AV receiver. Please refer to the user manual of your AV receiver.
Connecting to an Audio System Connecting to a TV Case 1 : HDMI cable (not included) HDMI cable (not included) Case 1 : HDMI cable (not included) Network Broadband modem (with integrated router) Or Case 2 : Coaxial cable (not included) Router Broadband service Broadband modem Broadband service Networking with PC for AllShare function ✎ NOTE : You can only connect this unit to a network via a wired connection.
Setup Menu Navigation The Initial Settings Procedure 111 Turn on your TV after connecting the player. When you connect the player to a TV for the first time, the player turns on automatically and the Initial Settings screen appears. Initial Settings I On-Screen Language Select a language for the on-screen displays. English Français Deutsch Español Italiano Nederlands > Move " Select 222 Use the ▲▼ buttons on the remote to select the desired language, and then press the ENTER button.
Display You can configure various display options such as the TV Aspect Ratio, Resolution, etc. TV Aspect Ratio Depending on the type of television you have, you may want to adjust the screen size setting. ••16:9 Original : Select when you connect the player to a 16:9 TV screen. The player will display all content in its original aspect ratio. Content formatted in 4:3 will be displayed with black bars on the left and right. ••16:9 Full : Select when you connect the player to a 16:9 TV screen.
✎ NOTE ▪▪ If the TV you connected to the player does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after selecting ‘Yes’, please wait for 15 seconds to return to the previous resolution. Do you want to change the resolution?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
Setup Connection Definition for Blu-ray Disc Bitstream (Unprocessed) PCM Any HDMI supported AV receiver Coaxial Decodes the main feature audio and BONUSVIEW audio stream together into PCM audio and adds Navigation Sound Effects.
Network Please contact your ISP to find out if your IP address is static or dynamic. If it is dynamic - and most are - we recommend using the Auto procedure for network setup. This is easiest and will work in the majority of cases. If it is static, you must use the manual set up procedure. Network setup directions start below. ✎ NOTE ▪▪ This unit can only be connected to a Network via a wired connection.
System Initial Settings By using the Initial Settings function, you can set the language, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual (page 12). Anynet+(HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung players that have the Anynet+ feature. To operate this function, connect this player to an Anynet+ Samsung TV with an HDMI cable.
General Time Zone You can specify the time zone that is applicable to your area. Support Software Upgrade The Software Upgrade menu allows you to upgrade the player’s software for performance improvements or additional services. By Online To upgrade By Online, follow these steps: 111 Select By Online, and then press the ENTER button. The Connecting to Server message appears. 222 A popup message will appear if an update is available.
Basic Functions Playing a Video Playback 111 Press the OPEN/CLOSE ( ) button to open the disc tray. 222 Place a disc gently into the tray with the disc’s label facing up. 333 Press the OPEN/CLOSE ( ) button to close the disc tray. 444 Press the PLAY ( ) button. Playback related buttons PLAY ( STOP ( PAUSE ( ) Starts playback. Stops playback. •• If you press the button once : The stop position is memorized. •• If you press the button twice : The stop position is not memorized. ) ) Pauses playback.
Slow Motion Play/Step Motion Play Slow Motion Play hzZyx •• In pause mode, press the SEARCH ( ) button. Each time you press the SEARCH ( ) button, the playback speed will change as follows: * 1/8 * 1/4 * 1/2 •• To return to normal speed playback, press the PLAY ( ) button. ✎ NOTE ▪▪ The player does not play sound in Slow mode. Step Motion Play hzZyx •• In pause mode, press the PAUSE ( ) button. Each time you press the PAUSE ( ) button, a new frame appears.
Changing the Camera Angle Setting BONUSVIEW h hZ When a Blu-ray Disc/DVD contains multiple angles of a particular scene, you can use the ANGLE function. 111 During playback, press the TOOLS button. 222 Press the ▲▼ buttons to select Angle. 333 Press the ◄► buttons to select the desired Angle. Selecting the Picture Settings hzZy This function enables you to adjust video quality when the player is connected to a TV. 111 During playback, press the TOOLS button.
666 To go to the Music List, press the STOP ( ) or RETURN button. 777 To go to the Playlist, press the ENTER button. ✎ NOTE ▪▪ You can create a playlist with up to 99 tracks on Audio CDs (CD-DA). Playing back Pictures Playing JPEG files ✎ NOTE G 111 Insert a JPEG disc into the disc tray. 222 Press the ◄► buttons to select Photos, and then press the ENTER button. 333 Press the ▲▼◄► buttons to select the folder you want to play, and then press the ENTER button.
Appendix Network Services You can enjoy various network services such as BD-LIVE by connecting the player to your network. Read the following instructions before using any network service. 111 Connecting the player to the network (pages 10 and 11). 222 Configuring the network settings (page 16). BD-LIVE™ Once the player is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc.
PROBLEM Forgot password SOLUTION •• Press the PLAY/PAUSE ( ) button (on front panel) for more than 5 seconds with no disc inside. All settings including the password will revert to the factory settings. Don’t use this unless absolutely necessary. •• When the factory default settings are restored, all stored user BD data is deleted. PROBLEM SOLUTION I cannot connect to the BDLIVE server. •• Check whether the network connection is successful or not by using the Network Status menu.
Specifications General USB HDMI Audio Output Network Weight 1.3 Kg Dimensions 360 (W) X 193 (D) X 41 (H) mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % to 75 % Type A USB 2.0 DC output 5V 500mA Max. Video 1080p, 1080i, 720p, 576p/480p Audio PCM, Bitstream Digital Audio Output Coaxial Ethernet 100BASE - TX Terminal -- It is not supported when the network speed is below or equal to 10Mbps.
Compliance and Compatibility Notice NOT ALL discs are compatible •• Subject to the restrictions described below and those noted throughout this Manual, including the Disc Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs. •• Discs other than the above cannot and/or is not intended to be played by this player.
License •• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. •• Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.