BD-E8300 BD-E8500 BD-E8900 BD-HDD Combo user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register 02230D-BD-E8900-XN-ENG.
Safety Information Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" CAUTION: TO REDUCE THE RISK OF ELECTRIC This symbol indicates important instructions inside the product that presents a risk of SHOCK, DO NOT REMOVE COVER (OR BACK) accompanying the product. electric shock or personal injury.
LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 Precautions Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1. Read these instructions. 3. Heed all warnings. 2. 4. 5. 6. 7. 8. Keep these instructions. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth.
Safety Information • Cleaning Discs -- If you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth. -- When cleaning, wipe gently from the inside to the outside of the disc. • Disc Storage `` Do not keep in direct sunlight. `` Keep in a cool ventilated area. `` Keep in a clean protection jacket and store vertically. Handling Cautions • Do not expose this apparatus to dripping or splashing.
01 • If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the product ’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content. • The product outputs 3D signals only through HDMI cable connected to the HDMI OUT port. • As the video resolution in 3D play mode is fixed according to the resolution of the original 3D video, you can not change the resolution to your preference.
Contents Safety Information 2 3 3 3 4 4 5 Warning Precautions Important Safety Instructions Disc Storage & Management Handling Cautions Using the 3D function Copyright Getting Started 8 8 8 8 9 9 10 13 14 14 15 Disc and Format Compatibility Disc types and contents your product can play Disc types your product cannot play Available Recording Time for internal HDD Region Code Logos of Discs the product can play Supported Formats Accessories Front Panel Rear Panel Remote Control Connections 17 18 18 18
46 46 DTV Functions 51 51 52 52 52 53 53 53 54 54 Watching TV Channels Using the Tools Menu Using the PIP (Picture-In-Picture) function Editing Channels Channel List Channel Screen Using the Tools Menu Viewing the Guide Screen Schedule Manager Using the Teletext Service Network Services 62 62 63 64 64 64 Using Smart Hub Smart Hub at a Glance Using the Web Browser BD-LIVE™ Samsung Smart View Dual View Contents 46 46 46 47 47 47 48 48 48 Controlling Music Playback Buttons on the Remote Control used f
Getting Started Disc and Format Compatibility Disc types and contents your product can play Contents VIDEO MUSIC PHOTO VIDEO MUSIC PHOTO Media Blu-ray Disc 3D Blu-ray Disc DVD-VIDEO DVD±RW/±R CD-RW/R CD-RW/R DVD±RW/±R BD-RE/R CD-RW/R DVD±RW/±R BD-RE/R HDD USB Details BD-ROM or BD-RE/R disc recorded in the BD-RE format. DVD-VIDEO, DVD±RW/±R discs that have been recorded and finalized. Media containing DivX, MKV or MP4 contents.
SD 20Mbps 102 Hours 49 Hours 30 Hours (High) DVD-VIDEO 5Mbps 411 Hours 199 Hourss 123 Hours (Normal) 10Mbps 205 Hours 99 Hours 61 Hours (High) ||NOTE | \\ Since the product's Timeshift and other implemented functions require a certain amount of HDD space allocated internally, the total size shown in the "Storage Device Manager" of Settings menu may differ from the HDD's capacity shown in the manual. Region Code Both products and discs are coded by region.
Getting Started Supported Formats Video File Support File Extension *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.vob *.svi *.m2ts *.mts *.divx *.webm Container AVI MKV ASF MP4 3GP VRO VOB PS TS WebM Video Codec Divx 3.11/4.x/ 5.x/6.x MPEG4 SP/ ASP H.
-- Supports WMA 10 PRO (Up to 5.1). -- Does not support WMA lossless audio. -- Does not support QCELP/AMR NB/WB. -- Supports vorbis (Up to 2ch), Supports codec only in webm container. -- Supported ADPCM IMA, MS. (MULAW, ALAW are not supported) ||NOTE | \\ Playback of some MKV or MP4 file may not be supported depending on their video resolution and frame rate. Supported Subtitle File Formats Name MPEG-4 Timed text .smi SubViewer .sub .srt Micro DVD .sub or.txt Advanced SubStation Alpha .
Getting Started • The product supports the PTP protocol. • Do not disconnect a USB device during a "loading" process. • The bigger the image resolution, the longer the image takes to display. • This product cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites. • Your product only supports video that is under 30fps (frame rate). • Your product only supports USB Mass Storage Class (MSC) devices such as thumb drives, flash card readers and USB HDD. (HUB is not supported.
AVCHD (Advanced Video Codec High Definition) 02 Getting Started • This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders. • The AVCHD format is a high definition digital video camera format. • The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format. • Some AVCHD discs use the "x.v.Color" format. This product can play back AVCHD discs that use "x.v.Color" format. • "x.v.
Getting Started Front Panel PLAY/PAUSE BUTTON ENTER BUTTON STOP BUTTON POWER BUTTON EJECT BUTTON DISC SLOT DISPLAY COMMON INTERFACE SLOT USB HOST REMOTE CONTROL SENSOR ||NOTE | \\ To upgrade the product's software through the USB Host jack, you must use a USB memory stick. \\ When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the product or the remote.
Remote Control Press this to operate a TV. Press this to operate BD-HDD Combo. Press numeric buttons to operate options or to access channels directly. Use to enter the disc menu. FUNCTION TV SOURCE POWER RECEIVER BD TV SUBTITLE TTX/MIX INPUT 1 2 3 4 5 6 7 8 DISC MENU 9 TITLE MENU 0 POPUP Press to skip backwards or forwards. Mutes the speakers of your TV. Press this to select a TV channel. TV SOURCE CH LIST HOME GUIDE Press to move to the home screen.
Getting Started Setting the Remote Control to Operate Your TV 1. 2. 3. 4. To determine whether your television is compatible, follow the instructions below. Turn your television on. Point the remote control towards the television. Press the TV button to set the TV mode. Press and hold the TV POWER button, and then enter the two-figure code in the table to the right that corresponds to the brand of your television by pressing the appropriate number buttons.
Connections Connecting to a TV with an Audio/Video cables and RF cable 3. Plug in the product and TV. 4. Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (white and red) terminals on the rear of the product to the VIDEO IN (yellow) / AUDIO IN (white and red) terminals of your TV. Turn on the product and TV. To ANT IN To TV RF cable R Red W White Y Yellow Connections Connect the RF cable as shown. 2. 03 1.
Connections Connecting to a TV 1. Connect the product to your TV using one of the methods illustrated below. 3. Press the input selector on your TV remote control until the signal from the product appears on the TV screen. 2. Turn on the product and TV. -- Do not connect the power cord until you have made all the other connections. -- When you change the connections, turn off all devices before you start.
Connecting to an Audio System Press the input selector of the connected audio system and TV until the video signal from the product appears on your TV and you hear the audio signal through your audio system. Connections 3. You can connect the product to an audio system using one of the three methods illustrated below. Turn on the product, audio system and TV. -- Do not connect the power cord until you have made all the other connections.
Connections Connecting to a Network Router Wireless Network You can connect your product to your network router using one of the methods illustrated below. Wired Network Wireless Router Or Broadband modem (with integrated router) Broadband service Broadband service ||NOTE | \\ If the wireless router supports DHCP, your product can use a DHCP or static IP address to connect to the wireless network.
Settings The Setup Procedure Schedule Manager : Lets you set or edit recording schedules. 4 Settings : Opens the Settings menu. 5 `` To select an option on the Home screen: The Setup Procedure lets you set the OSD and menu languages, configure the connection to your home network, choose the aspect ratio output (screen size and format) that is correct for your TV, and search desired channels. 1. Use the ◄► buttons to move the cursor so that it highlights your choice, and then press v button.
BD TV SUBTITLE INPUT 1 2 3 4 5 6 7 8 Settings 0 DISC MENU 9 TITLE MENU POPUP Buttons on the Remote Control used for the Settings menu TV MUTE TV SOURCE CH LIST 1 HOME GUIDE 3 2 1 2 3 4 4 A B C D SMART HUB SEARCH 3D HOME Button : Press to move2D to the Home screen. DIGITAL SUBTITLE INPUT RETURN Button to the previous menu. PANDORA : Return SUBTITLE SOCIAL REC REC PAUSE v (Enter) / DIRECTION Buttons : • Press ▲▼◄► to move the cursor or select an item.
Settings Menu Functions TV Aspect Ratio Smart Hub Screen Size BD Wise Resolution DTV Smart Resolution Movie Frame (24Fs) Settings 3D Settings Select whether to play a Blu-ray Disc with 3D contents in 3D Mode. • If you move to the Home or Smart Hub Home screen while in 3D mode, the product will switch to 2D automatically. 04 Display Lets you adjust the output of the product to the screen size of your TV. Lets you select the optimal size for the Smart Hub Screen.
Settings Display HDMI Colour Format HDMI Deep Colour Progressive Mode Audio Digital Output PCM Downsampling Lets you set the colour space format for HDMI output to match the capabilities of the connected device (TV, monitor, etc). Lets you output video from the HDMI OUT jack with Deep colour. Deep colour provides more accurate colour reproduction with greater colour depth. Lets you improve picture quality when viewing DVDs. Set Digital output option suitable for your TV or AV Receiver.
Settings Connected Device 04 Choose an equipment that you have connected to this product to hear the sound in addition to your TV. Loudness of DTV Program will be adjusted according to your equipment. AV Receiver : Select this If you use a general AV Receiver / Home Theatre Equipment or a Television to hear sound. AV Receiver (Offset Mode) : Slect this if your case is one of two shown below. -- If you use THX Certified AV Receiver / Home Theatre Equipment.
Settings Channel Aerial Selects an appropriate type of antenna for digital broadcasts. Before your product can begin memorizing the available channels, you must specify the type of signal source that is connected to the this product. Select this to change the country. Enter the desired 4-digit password using the number buttons. Default password is set to 0000.
Network Wi-Fi Direct Soft AP AllShare Settings Device Name BD-Live Settings System Setup Lets you check the current network and Internet status. Lets you connect a Wi-Fi Direct device to the product using a peer-to-pear network, without a wireless router. By Wi-Fi Direct, you may use one device to control other devices. Settings Network Status Configure the network connection so you can enjoy various features such as Internet services or AllShare Wi-Fi functionality, and perform Software Updates.
Settings Enable or disable the data service autorun feature, which activates data service automatically. System ||NOTE | \\ This menu can be displayed when the country set to Germany, Austria, Switzerland, France, Spain, Belgium, and Netherlands. Data Service \\ Data Service allows you to use information (text, still images, graphics, documents, software, etc.) transmitted via broadcast media if the channel you are currently watching provides data service.
\\ You can use the Keyboard only when a QWERTY keyboard screen or window appears in the Web Browser and Smart Hub. Mouse settings : Lets you configure a wireless USB mouse connected to the product. You can use the mouse in the product's menu in the same way you use a mouse on your PC. Settings ||NOTE | 04 You can connect a wireless USB keyboard or mouse to the USB port on the front of the product. Keyboard settings : Lets you configure a wireless USB keyboard connected to the product.
Settings System Security This function works in conjunction with Blu-ray Disc/ DVDs that have been assigned an age rating or numeric rating that indicates the maturity level of the content. These numbers help you control the types of Bluray Disc/DVDs that your family can watch. When you access this function, the security screen appears. Enter the your Security password. (The default password is 0000.
System \\ This feature is available only when the product is connected to the network Menu Transparency : Adjust the transparency of the menu box. DivX® Video On Demand Common Interface View DivX® VOD Registration Codes to purchase and play DivX® VOD contents. Show the CI Menu Information screen. CI Menu : This enables the user to select from the CAM provided menu. Select the CI Menu based on the menu PC Card. Application Info.
Settings ||NOTE | System \\ This product works with CI and CI+ CAM. But in case of some local DVB-T association, this product may not have perfect compatibility with all kinds of CAM. \\ If the inserted CAM does not operate properly, pull the CAM CARD out of the product and insert it into the slot again. Common Interface \\ If a popup message appears, please take a step referring the follows.(This is not a product malfunction. Please contact your service provider for more information.) 1. 2. 3. 4.
Networks and the Internet Wired - Manual 1. Select Start in the Network Settings screen, and then press the v button. The Network Status screen appears. The product will verify the network connection. Configuring Your Network Connection Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.
Settings < Getting the Network Settings Values > You can view your Network Settings values on most Windows computers. To view the Network Settings values, follow these steps: • Windows XP 1. 2. 3. 4. ĞĞ Wireless (General) - Automatic After following Steps 1 to 3 in "Configuring Your Network Connection" on page 33. 1. Select Start in the Network Settings screen, and then press the v button. The product searches for and then displays a list of the available networks.
ĞĞ Wireless (General) - Manual 2. 3. 4. 5. 6. 7. 8. 9. Select Start in the Network Settings screen, and then press the v button. The product searches for and then displays a list of the available networks. 1. 2. Select the desired network, and then press the v button. Select Next, and then press the v button again. On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control.
Settings 5. You have three ways to complete the Wi-Fi connection: • Through the Wi-Fi device. • Through the product using PBC. • Through the product using a PIN. Each is covered below. Through the Wi-Fi Device 1. 2. 3. On the Wi-Fi device, follow the procedure on the device for connecting to another Wi-Fi Direct device. See the device's user manual for instructions.
The AllShare Settings screen lists your network connected AllShare devices and their IP addresses. Through this screen, you can allow a device to access the product, deny access, or delete the device from the AllShare list. 1. 2. 3. 4. 5. In the Home screen, select Settings, and then press the v button. Select Network, and then press the v button. Select AllShare Settings, and then press the v button.
Settings 3. 4. 5. When the download is complete, the Upgrade Query window appears with three choices: Upgrade Now, Upgrade Later, or Don't Upgrade. If you select Upgrade Now, the product upgrades the software, turns off, and then turns on automatically. If you do not make a selection in one minute or select Upgrade Later, the product stores the new upgrade software. You can upgrade the software later using the By Downloaded function.
By Downloaded 2. 3. 4. Settings 1. 04 The By Downloaded option lets you upgrade using a file the product downloaded earlier but you decided not to install immediately or a file downloaded by the product in Standby Mode. If upgrade software has been downloaded, you will see the software version number to the right of By Downloaded. Select By Downloaded, and then press the v button. The product displays a message asking if you want to upgrade. Select Yes. The product begins the upgrade.
Media Play Insert a Disc to the Disc tray 1. Place a disc gently into the disc slot with the disc’s label facing up. Playback starts automatically. 2. 3. 4. Select Videos, Photos, or Music, and then press the v button. Depending how the contents are arranged, you will see either folders, individual files, or both. Select the desired files. Press the RETURN button to exit a folder or to return to Home screen screen.
3 4 Contents Type : Lets you select a desired contents. AllShare Play lets you play Videos, Photos, or Music located in your PC or your DLNA compatible devices, Facebook, SugarSync and Family Story on the BD-HDD Combo with network connection. To use AllShare with your PC, you must install AllShare software on your PC. ||NOTE | \\ Once the connection is established, you can not only play the video content but also transfer data between devices using the Allshare feature.
Media Play • Camera : You can play content that is stored in the connected camera. • DLNA : You can play content that is stored in the connected storage device. • Picasa : You can play content that is stored in the Picasa. • SugarSync : You can play content in the Cloud service that you are registered with. • Family Story : You can play content that is stored in Family Story. • Facebook : You can play content that is stored in the facebook. 5. 6. 7. 8. 9.
PC BD-HDD Combo AllShare Play Connection Play back PC's files Playing content located in your Mobile device on the BD-HDD Combo You can view shared files of your Mobile device to your BD-HDD Combo. You can get detailed instructions for using AllShare from the Samsung.com website. Mobile device BD-HDD Combo Use your mobile device to view files stored in your computer, played by BD-HDD Combo. (Only available with Samsung mobile devices supporting AllShare functionality.
Media Play Controlling Video Playback POWER FUNCTION TV SOURCE RECEIVER TTX/MIX You can control the playback of video content located on a Disc, USB, mobile device or PC. Depending BD TV SUBTITLE INPUT on the disc or contents, some of the functions described in this manual may not be available.
Time Search 2. Using the number buttons, enter the time point you want to go to, and then press the v button. ||NOTE | Picture Mode \\ You can also use the ◄► buttons to advance or rewind the movie. The movie advances or rewinds one minute each time you press the ◄ ► buttons. Select to repeat a title, chapter, or specific section. -- Off : Select to return to normal playback. -- Title : Choose to repeat a selected title. -- Chapter : Choose to repeat a specific chapter.
FUNCTION TV SOURCE POWER Media Play RECEIVER BD TV SUBTITLE TTX/MIX INPUT 1 2 3 Controlling Music 4 5 Playback 6 8 of9music content You can control the7playback DISC MENU TITLE MENU located on a Disc, USB, mobile device or PC. POPUP 0 Buttons on the Remote Control used for Music Playback FUNCTION TV SOURCE POWER RECEIVER BD TV MUTE TV SUBTITLE 1 4 1 CH LIST 7 A CH LIST 4 5 6 2 3 5 6 8 0 9 TITLE MENU POPUP DIGITAL SUBTITLE SOCIALHOMEREC D See pages 48~50.
Creating a Playlist from a CD 3. 4. 5. 6. Use the ▲▼ buttons to select Play selection, and then press the v button. The Play selection screen appears. Use the ▲▼ buttons to select a track, and then press the v button. A check appears to the left of the track. Repeat Step 3 to select and check additional tracks. To remove a track from the list, move to the track, and then press the v button again. The check on the track is removed.
Media Play Playing Photo Contents You can play photo contents located on a Disc, USB, mobile device or PC. Using the Tools Menu During playback, press the TOOLS button. Go to Photos List Start Slide Show Select to go to the list of photos on the current media. Select to start the slide show. Slide Show Speed Select to set a slide show's speed. Background Music On Select to listen to music while viewing a slide show.
Monthly Appears on the View function screen. Select to sort and then display all photo or video files on a storage device from the earliest to latest date. Appears on the View function screen. Select to sort all photo or video files on a storage device by the month created. Play selection lets you select specific music, video, and photo files to play. It works essentially the same for all media. The example below is for photos. 1.
Media Play Add to Playlist (continued) • Select the Playlist to which you want to add the tracks or files and then press v button. • Select Create New, and then press the v button. On the keyboard pop-up that appears, create a name for the new playlist. Enter numbers using the numbers on the remote. Enter letters by using the ▲▼◄► buttons to move the cursor, and then pressing the v button. When finished, move to DONE at the bottom of the screen, and then press the v button.
DTV Functions FUNCTION TV SOURCE POWER Watching TV Channels RECEIVER TTX/MIX FUNCTION POWER BD TV SUBTITLETV SOURCE INPUT TV 4 1 7 4 DISC MENU 7 DISC MENU SUBTITLE 5 2 8 5 0 8 INPUT 6 3 9 6 POPUP TITLE MENU 1 9 Picture Mode TITLE MENU 0 POPUP TV MUTE TV MUTE CH LIST CH LIST 1 2 3 HOME GUIDE HOME GUIDE TV SOURCE 3 PROG buttons A B : Press C this D button to change TV SMART HUB SEARCH 2D 3D channels.
DTV Functions Using the PIP (Picture-In-Picture) function You can see another TV channel together with the TV Channel you were already watching. 1. 2. 3. While you are watching a TV channel, press the PIP button on the remote control. The PIP screen will be displayed. Editing Channels Channel List 1. Press the CH LIST button on the remote control to see all channels searched. The Channel List will be displayed. If you do not want to use PIP, press the PIP button again while PIP is enabled.
Channel Screen Using the Tools Menu In the Home screen, select Channel, and then press the v button. Channel All 56 TF1 HD M6HD 801 FTA TV 1 51 Radio Data/Other Free 803 3.10.6.4 TV 805 6.3.5. TV 2 807 6.3.5. TV 4 809 6.7 Per sistent... 811 BBC 813 CANAL+FILM 815 CANAL+Sport a Air b Delete 1 2 3 52 800 Edit Favourites Lock / Unlock France 2 HD 802 NOVA 804 6.10B Bad Rec... 806 6.3.5. TV 3 808 6.3.5.
DTV Functions 1. Schedule Manager Press the GUIDE button. The guide screen will be displayed. • Guide Screen Guide 1 52 France 2 HD Channel View - All Today 812 Class News 2 ▲ 813 814 3 815 ▼ 817 Coming Soon Discovery DiscoveryH&L heat No Information 9:05 - 9:35 No Information 1:00 – 2:00 1:00 – 2:00 No Information 2 3 4 5 6 4 5 1:00 – 2:00 3. No Information No Information No Information i Information ƒ Page " Watch 6 Displays the channel screen. Displays view mode.
1 4 5 6 7 8 9 0 ! A B 9 : Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again. Colour buttons (red, green, yellow, blue) : If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colourcoded page is displayed.
Advanced Function Recording \\ Display of HDD Capacity Before recording • Please check the default recording device and available storage size in storage device for recording. (please refer to “Storage Device Manager" on page 28.) • At least 100MB of free space is required for recording. • Recording will stop if the storage's free space becomes less than 50MB. Checking Available Storage Size To check the available storage size in Recorded TV, Select AllShare Play>Recorded TV> HDD in the Home screen.
1. 4. 5. 6. 7. 2 button : Jump to the same scene with Live TV. ◄ button : Jump to - 10 sec from current position. ► button : Jump to + 10 sec from current position. 7 button : Pause the scene while keeping recording progress. 5 button : If you are watching the past scene, the playback point will jump to the same scene with Live TV. If you are watching same scene with Live TV, recording will be stopped.
Advanced Function Timeshift function -- Timeshift automatically stops when selected another menu in the Home menu. (Stops Timeshift and history functions that were operating.) -- Returning to a Digital TV channel will automatically resumes Timeshift, if not accessed any other menu item of the Home menu. You can pause a live TV or start watching the TV programme from the beginning point you started Timeshift function. Start Timeshift with PLAY button 1. 2.
4. 7. 7 button : Pause the scene while keeping Timeshift operation. 5 button : If you are watching the past scene, playback point will jump to the same scene with Live TV. If you are watching the same scene with Live TV, the Timeshift function will be stopped. To stop Timeshift 1. 2. 3. 4. 5. 2. 3. 4. 2. 3. In the Recorded TV screen, select the desired title you want to edit. Press the TOOLS button. Select the Edit, then press the v button.
Advanced Function Splitting a Section of a Title (Partial Delete) Follow Steps 1 through 3 in the ‘Edit the Recorded Title’. 1. Select the Partial Delete, then press the v button. AllShare Play Recorded TV 00:00:00 Part 2 00:00:00 00:00:33 / 00:08:21 + Playback Controls 2. 3. 4. 5. Start End Delete Return Scene Search < Jump > Move " Enter Press the v button at the starting point. The image and starting point time is displayed in the section deletion starting point window.
||NOTE | Viewing DTV with the 3D effect You can experience 3D effect with all live TV programme and recorded TV programme. \\ 2D content is converted into the following 3D formats: -- 1080p 24fps : Output to 1080p 24 fps 3D. -- Others : Output to 720p 3D. -- Photo files : Output to 720p 3D. \\ 2D content that the product can convert to 3D: -- 2D content that supports 3D conversion -- Smart Hub content, DVD Video, BD-ROM, Video files, photo files, DTV programme, and recorded DTV programme.
Network Services You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the product to your network. Smart Hub at a Glance 1 To use network services, you must first: 1. 2. 0 9 Using Smart Hub Using Smart Hub, you can download movies, videos, and music from the Internet, and access various for pay or free-of-charge applications and view them on your TV. Application content includes news, sports, weather forecasts, stock market quotes, maps, photos, and games.
Web Browser at a Glance 1 Samsung Apps : Open Samsung Apps to download various for pay or free-of-charge application services. http://www.google.com/ Network Services 0 08 My Applications : Displays your personal gallery of applications which you can add to, modify, and delete. 9 Using the Web Browser You can access the internet using the Web Browser application which is installed in the Smart Hub screen by default. 1. 2.
Network Services Navigation Help : Displays the remote control buttons you can use to navigate in Web Browser. • GREEN (B) : To display the Control Panel. • YELLOW (C) : To switch the pointer. • BLUE (D) : To use the PIP function. • Tools : To display Tools window. • Exit : To exit the Web Browser. 2 BD-LIVE™ Once the product is connected to your network, you can enjoy various movie-related service contents available on BD-LIVE compliant discs. 1. 2. 3. 4. 5. 6. 7. 8. 9.
Appendix Compliance and Compatibility Notice 02230D-BD-E8900-XN-ENG.indd 65 Appendix English 09 NOT ALL discs are compatible • Subject to the restrictions described below and those noted throughout this Manual, including the Disc Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA); BD-RE/R, DVD-RW/-R; and CD-RW/R. • Discs other than the above cannot and/or is not intended to be played by this product.
Appendix Copy Protection • Because AACS (Advanced Access Content System) is approved as content protection system for Bluray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.
09 Appendix THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Appendix -- DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
09 Appendix -- To the extent that you, the End User, provide any information or original works of authorship to be added to Rovi Databases, you represent and warrant that you are the sole author of such work(s) and further hereby assign to Rovi all rights of copyright therein, including the right to register the copyright in such work(s) as part of the Rovi Database. -- THE ROVITECHNOLOGY AND EACH ITEM OF ROVI DATA ARE LICENCED TO YOU "AS IS.
Appendix Additional Information Note 3D Settings • For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie stops and the 3D mode option is de-activated. To change a 3D option selection when you are playing a 3D movie, press the 5 button once. The Blu-ray menu appears. Press the 5 button again, then select 3D Settings in the Blu-ray menu.
BD-LIVE Internet Connection Settings Appendix Delete BD Data 09 • What is a valid certificate? When the product uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the product. • The Internet connection may be restricted while you are using BD-LIVE contents.
Appendix Resolution according to the output mode Blu-ray Disc/E-contents/Digital Contents playback Setup HDMI / not connected HDMI / connected Contents Type HDMI Mode E-contents/ Digital contents VIDEO Mode VIDEO Mode 1080p 576i/480i - Max. Resolution of TV input Max.
DTV View Auto DTV Smart Resolution "Auto" DTV Smart Resolution "Off" 1080p 1080i 720p 576p/480p 576i/480i HDMI Mode 1080p VIDEO Mode Resolution of Broadcast stream Max Resolution of TV input 1080p HDMI / not connected - Appendix BD Wise HDMI / connected 09 Output Resolution 576i/480i VIDEO Mode 576i/480i - 576i/480i - 1080i 576i/480i 576i/480i 576p/480p 576i/480i 576i/480i 720p - 576i/480i - 576i/480i 576i/480i ||NOTE | \\ DTV smart resolution is activated only when resol
Appendix Digital Output Selection Setup Connection HDMI supported AV receiver Up to PCM 7.1ch Up to PCM Dolby Digital 7.1ch Dolby Digital Up to PCM Plus 7.1ch Audio Stream Up to PCM Dolby TrueHD on Blu-ray 7.1ch Disc Up to PCM DTS 6.1ch DTS-HD High Up to PCM Resolution 7.1ch Audio DTS-HD Up to PCM Master Audio 7.1ch PCM PCM 2ch Up to PCM Audio Stream Dolby Digital 5.1ch on DVD Up to PCM DTS 6.
Any HDMI supported AV receiver Optical Decodes the main feature audio and BONUSVIEW audio stream together into PCM audio and adds Navigation Sound Effects. HDMI supported AV receiver Optical Outputs only the main feature audio stream so that your AV receiver can decode the audio bitstream. You will not hear BONUSVIEW audio or Navigation Sound Effects.
Appendix Troubleshooting Before requesting service, please try the following solutions. PROBLEM SOLUTION No operation can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 6.1m. • Remove the batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall the batteries and try to operate the remote control again.
PROBLEM SOLUTION The picture is noisy or distorted • Make sure that the disc is not dirty or scratched. • Clean the disc. No HDMI output. • Check the connection between the TV and the HDMI jack of the product. • Check if your TV supports 480p, 720p, 1080i, 1080p HDMI input resolution. Abnormal HDMI output screen. • If random noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital Content Protection).
Appendix PROBLEM BD-LIVE SOLUTION I cannot connect to the BD-LIVE server. • Check whether the network connection is successful or not by using the Network Status menu. (See page 27) • Check whether the USB memory device is connected to the product. • The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in Delete BD Data. (See page 27) • Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
Specifications Video Output Audio Output Network HDD Capacity Composite Video (Analogue) Analogue Digital Ethernet Wireless LAN Security WPS(PBC) BD-E8300 BD-E8500 BD-E8900 Appendix HDMI 3.2 Kg 430 (W) X 300 (D) X 59 (H) mm +5°C to +35°C 10 % to 75 % Resolution : 1080p, 1080i, 720p, 576p/480p PCM, Bitstream RCA Terminal, 1.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Area ALBANIA AUSTRIA Contact Centre 42 27 5755 0810 - SAMSUNG (7267864, € 0.
BD-E8300 BD-E8500 BD-E8900 BD-HDD Combo manuel d’utilisation imaginez les possibilités Nous vous remercions d’avoir choisi ce produit Samsung. Pour avoir accès à d’avantage de services, veuillez enregistrer votre produit sur le site www.samsung.com/register 02230D-BD-E8900-XN-FRA.
Consignes de sécurité Avertissement POUR DIMINUER LES RISQUES D'ELECTROCUTION, NE RETIREZ PAS LE COUVERCLE (OU LE CACHE ARRIERE). AUCUN DES ELEMENTS CONTENUS A L'INTERIEUR N'EST REPARABLE PAR L'UTILISATEUR. CONFIEZ L'ENTRETIEN DE CET APPAREIL A UNE PERSONNE QUALIFIEE. ATTENTION Ce symbole signale la présence à l'intérieur du produit d'une tension dangereuse qui peut provoquer des chocs électriques ou des blessures corporelles.
LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 Précautions Consignes de sécurité importantes Lisez attentivement ces consignes avant d'utiliser l'appareil. Veillez à respecter toutes les consignes répertoriées ci-après. Conservez ces instructions à portée de main pour vous y référer ultérieurement. 1. Lisez attentivement ces consignes. 3. Tenez compte de tous les avertissements mentionnés. 2. 4. 5. 6. 7. 8. Conservez-les précieusement.
Consignes de sécurité • Nettoyage des disques -- En cas d’empreintes de doigt ou de saleté sur le disque, nettoyezle à l'aide d'eau additionnée de détergent doux et d’un chiffon doux. -- Lors de son nettoyage, essuyez le disque du centre vers le bord. • Rangement des disques `` N’exposez pas le disque à la lumière directe du soleil. `` Stockez-le dans un endroit frais et aéré. `` Rangez-le dans une jaquette propre et stockez-le verticalement.
01 • Pour bénéficier du visionnage de contenus en 3D, connectez un appareil 3D (récepteur AV ou téléviseur compatible 3D) au port de sortie HDMI OUT du produit à l'aide d'un câble HDMI haut débit. Veillez à porter des lunettes 3D avant de visionner le contenu 3D. • Le produit émet des signaux 3D uniquement via le câble HDMI connecté au port de sortie HDMI OUT.
Contenus Consignes de sécurité 2 3 3 3 4 4 5 Avertissement Précautions Consignes de sécurité importantes Rangement et gestion des disques Précautions de manipulation Utilisation de la fonction 3D Copyright Mise en route 8 8 8 8 9 9 10 13 14 14 15 Compatibilité des disques et format du contenu Types de disques et contenus pouvant être lus sur ce produit Types de disques ne pouvant pas être lus sur ce produit Durée d'enregistrement disponible pour le disque dur interne Code régional Logos des disques po
46 46 Fonctions de la télévision numérique 51 51 52 52 52 53 53 53 54 54 Regarder les chaînes de télévision Utilisation du menu Outils Utilisation de la fonction PIP (Incrustation d’image) Chaînes modifiées Liste des chaînes Ecran des chaînes Utilisation du menu Outils Affichage de l'écran Guide Gestionnaire prog.
Mise en route Compatibilité des disques et format du contenu Types de disques et contenus pouvant être lus sur ce produit Contenus VIDÉO MUSIQUE PHOTO VIDÉO MUSIQUE PHOTO Support Disque Blu-ray Disque Blu-ray 3D DVD-VIDEO DVD±RW/±R CD-RW/R CD-RW/R DVD±RW/±R BD-RE/R CD-RW/R DVD±RW/±R BD-RE/R Disque dur USB Détails Disque BD-ROM ou BD-RE/R enregistré au format BD-RE. Diques DVD-VIDEO, DVD±RW/±R qui ont été enregistrés et finalisés. Support possédant des contenus DivX, MKV ou MP4.
SD Durée d'enregistrement BD-E8900 BD-E8500 BD-E8300 8Mbps 257 heures 124 heures 77 heures (Normal) 20Mbps 102 heures 49 heures 30 heures (High) 4 DVD VIDÉO 5Mbps 411 heures 199 heures 123 heures (Normal) 10Mbps 205 heures 99 heures 61 heures (High) ||REMARQUE | \\ La fonctionnalité Programmation du produit et d'autres fonctions appliquées nécessitant une certaine quantité d'espace alloué en interne sur le disque dur, la taille totale indiquée dans le « Gestionnaire périph.
Mise en route Formats pris en charge Prise en charge des fichiers vidéo Extension de fichier Conteneur *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.vob *.svi *.m2ts *.mts *.divx *.webm AVI MKV ASF MP4 3GP VRO VOB PS TS WebM Codec vidéo Divx 3.11/4.x/ 5.x/6.x MPEG4 SP/ ASP H.
-- Prend en charge le format WMA 10 PRO (jusqu'à 5.1). -- Ne prend pas en charge le format audio sans perte WMA. -- Ne prend pas en charge les formats QCELP/ AMR NB/WB. -- Prend en charge le format vorbis (jusqu'à 2 chaînes), Prend en charge les codecs uniquement avec le conteneur webm. -- ADPCM IMA, MS.
Mise en route • Le produit prend en charge le protocole PTP. • Ne déconnectez pas le périphérique USB durant un processus de « chargement ». • Plus la résolution de l’image est élevée, plus lent est le délai d'affichage de l'image. • Ce produit ne peut pas lire les fichiers MP3 de type DRM (Gestion des droits numériques) téléchargés depuis des sites commerciaux. • Votre produit ne prend en charge que les vidéos dont la vitesse de défilement des images est inférieure à 30 fps.
AVCHD (Codec vidéo avancé haute définition) 02 Mise en route • Ce produit prend en charge la lecture des disques au format AVCHD. Ces disques sont normalement enregistrés et lus sur des caméscopes. • Le format AVCHD est un format vidéo numérique haute définition. • Le format MPEG-4 AVC/H.264 compresse les images de manière plus efficace que le format de compression d'image conventionnel. • Certains disques AVCHD utilisent le format « x.v.Color ».
Mise en route Panneau avant BOUTON LECTURE/PAUSE BOUTON ENTRÉE BOUTON ARRÊT BOUTON MARCHE/ARRÊT BOUTON D'ÉJECTION LOGEMENT DE DISQUE ÉCRAN LOGEMENT POUR INTERFACE COMMUNE USB HOST CAPTEUR DE LA TÉLÉCOMMANDE ||REMARQUE | \\ Pour mettre à niveau le logiciel du produit via la prise Hôte USB, vous devez utiliser une carte mémoire flash USB.
Télécommande Appuyez sur ce bouton pour faire fonctionner un téléviseur. Appuyez sur ce bouton our faire fonctionner le lecteur BD-HDD Combo. Appuyez sur les boutons numériques pour faire fonctionner les options ou accéder directement aux canaux. Appuyez sur ce bouton pour accéder au menu du disque. FUNCTION TV SOURCE POWER RECEIVER BD TV SUBTITLE TTX/MIX INPUT 1 2 3 4 5 6 7 8 DISC MENU 9 TITLE MENU 0 POPUP Appuyez sur ces boutons pour effectuer un saut vers l'arrière ou l'avant.
Mise en route Réglage de la télécommande pour faire fonctionner le téléviseur 1. 2. 3. 4. Afin de déterminer la compatibilité de votre téléviseur avec la télécommande, veuillez suivre les consignes ci-dessous. Allumez votre téléviseur. Pointez la télécommande en direction du téléviseur. Appuyez sur le bouton TV pour sélectionner le mode TV.
Branchements Connexion à un téléviseur via un câble audio/vidéo et un câble RF 3. Branchez le produit et le téléviseur. 4. Utilisez des câbles audio/vidéo pour connecter les bornes VIDEO OUT (jaune) / AUDIO OUT (rouge et blanc) situées à l'arrière du produit aux bornes VIDEO IN (jaune) / AUDIO IN (rouge et blanche) du téléviseur. Allumez le produit et le téléviseur. Vers ANT IN Vers TV Câble RF R Rouge W Blanc Y Jaune Branchements Connectez le câble RF tel qu'indiqué. 2. 03 1.
Branchements Connexion du lecteur à un téléviseur 1. Connectez le produit à votre téléviseur à l'aide de l'une des méthodes illustrées ci-dessous. 3. Appuyez sur le sélecteur d’entrée de la télécommande de votre téléviseur jusqu’à ce que le signal en provenance du produit s’affiche sur l’écran du téléviseur. 2. Allumez le produit et le téléviseur. -- Ne branchez pas le cordon d'alimentation avant d'avoir effectué toutes les autres connexions.
Connexion à une chaîne hi-fi Appuyez sur le sélecteur d’entrée du système audio connecté et du téléviseur jusqu'à ce que le signal vidéo du produit s'affiche sur le téléviseur et vous écouterez le signal audio sur le système audio. Méthode 1 Connexion à une prise HDMI prise en charge par le récepteur AV Branchements 3. Vous pouvez connecter le produit à une chaîne hi-fi à l'aide de l'une des trois méthodes illustrées ci-dessous. Allumez le produit, le système audio et le téléviseur.
Branchements Connexion à un routeur de réseau Réseau sans fil Vous pouvez connecter votre produit à votre routeur de réseau à l'aide de l'une des méthodes illustrées ci-dessous.
Paramètres • L'écran d'accueil n'apparait pas si vous ne configurez pas les paramètres initiaux. • L'affichage à l'écran (OSD) de cet appareil peut changer après la mise à niveau de la version du logiciel. • Les étapes d'accès peuvent varier selon le menu sélectionné.
BD TV SUBTITLE INPUT 1 2 3 4 5 6 7 8 DISC MENU 9 0 Paramètres TITLE MENU POPUP Boutons de la télécommande utilisés pour le menu des paramètres TV MUTE TV SOURCE CH LIST 1 HOME GUIDE 3 2 4 A 1 3 4 C D SMART HUB SEARCH Bouton HOME : Appuyez sur 2Dce3Dbouton pour DIGITAL SUBTITLE INPUT accéder à l'écran SOCIAL d'accueil. REC REC PAUSE PANDORA 2 B SUBTITLE Bouton RETURN : Permet de revenir au menu précédent.
Fonctions du menu des paramètres Format TV Taille écran Smart Hub BD Wise Résolution Résolution intell. DTV Trame vidéo (24Fs) Vous permet d'ajuster la sortie du produit à la taille de l'écran de votre téléviseur. Paramètres Paramètres 3D Vous pouvez choisir de lire en mode 3D ou non un disque Blu-ray comportant des contenus 3D. • Si vous accédez à l'écran d'accueil ou Smart Hub en mode 3D, le produit passera automatiquement en mode 2D.
Paramètres Affichage Format couleur HDMI Couleur intense HDMI Audio Cette option permet de régler le format de l'espace colorimétrique applicable à la sortie HDMI en réponse aux capacités de l'appareil connecté (téléviseur, moniteur, etc.). Cette option vous permet d'émettre des données vidéo en sortie avec Couleur intense via la prise HDMI OUT. L'option Couleur intense permet une reproduction plus fidèle des couleurs, notamment en termes de profondeur.
Paramètres Périph. connecté 04 Choisissez un équipement que vous avez connecté à ce produit pour écouter le son en plus de celui de votre téléviseur. Le volume du programme DTV sera ajusté en fonction de votre équipement. Récepteur AV : Sélectionnez cette option si vous utilisez un récepteur AV général / un équipement de Home cinéma ou un téléviseur pour écouter le son. Récepteur AV (Mode déc.) : Sélectionnez cette option si votre cas est l'un des deux indiqués cidessous.
Paramètres Canal Antenne Cette option vous permet de sélectionner un type approprié d'antenne pour les besoins de la diffusion numérique. Avant de mettre en mémoire les chaînes disponibles sur le produit, vous devez spécifier le type de signal source connecté à ce produit. Sélectionnez cette option pour modifier le pays sélectionné. Entrez le mot de passe à 4 chiffres souhaité à l’aide des boutons numériques. Par défaut, le mot de passe est réglé sur 0000.
Réseau Wi-Fi Direct Soft AP Paramètres AllShare Nom du Périph. Système Vous permet de vérifier le réseau actuel et l'état d'Internet. Vous permet de connecter un périphérique Wi-Fi Direct à l'appareil en utilisant un réseau peer-to-peer, sans qu'un routeur sans fil soit nécessaire. Avec Wi-Fi Direct, vous pouvez utiliser un seul périphérique pour contrôler tous les autres périphériques.
Paramètres Permet d'activer ou de désactiver la fonction d'exécution automatique du service de données, qui active le service de données automatiquement. Système Service de diffusion de données Anynet+ (HDMI-CEC) Gestionnaire périph. stockage ||REMARQUE | \\ Ce menu peut être affiché lorsque le pays est défini sur Allemagne, Autriche, Suisse, France, Espagne, Belgique et Pays-Bas. \\ Service de données vous permet d'utiliser des informations (texte, images figées, graphiques, documents, logiciel, etc.
Gest. périph. Paramètres ||REMARQUE | \\ Vous ne pouvez utiliser le clavier que si une fenêtre ou un écran QWERTY s’affiche dans le navigateur Web et le Smart Hub. Paramètres souris : Vous permet de configurer une souris USB sans fil branchée sur l'appareil. Vous pouvez utiliser la souris dans le menu de l'appareil de la même manière que vous utilisez une souris sur votre PC. 04 Vous pouvez brancher une souris ou un clavier USB sans fil sur le port USB à l'avant de l'appareil.
Paramètres Système Sécurité Cette fonction opère en conjonction avec les disques Bluray et les DVD auxquels une classification par catégorie d’âge ou une classification numérique a été attribuée indiquant le niveau de maturité du contenu. Ces numéros vous aident à contrôler les types de disques Blu-ray et/ ou les DVD que vous pouvez regarder en famille sans souci. Lorsque vous accédez à cette fonction, l’écran de sécurité apparaît. Entrez votre mot de passe de sécurité.
Système Interface commune Affichez les codes d'enregistrement DivX® VOD pour acheter et lire des contenus DivX® VOD. Affiche l'écran d'informations relatives au menu CI. CI Menu : Cette option permet à l'utilisateur de sélectionner un élément dans le menu CAM fourni. Sélectionnez l'option dans CI Menu en fonction du menu Carte PC. Infos application.
Paramètres ||REMARQUE | System Interface commune \\ Cet appareil fonctionne avec les cartes CI et CI+ CAM. Toutefois, en cas d'association locale DVB-T, cet appareil peut ne pas être parfaitement compatible avec tous les types de cartes CAM. \\ Si la carte CAM insérée ne fonctionne pas correctement, retirez la carte CAM CARD de l'appareil et insérez-la à nouveau dans la fente. \\ Si un message contextuel apparaît, prenez la mesure appropriée en fonction des informations suivantes sur ce message.
Réseaux et Internet 1. 2. 3. 4. Sur l'écran d'accueil, sélectionnez Paramètres, puis appuyez sur le bouton v. Sélectionnez Réseau, puis appuyez sur le bouton v. Selectionnez Paramètres réseau, puis appuyez sur le bouton v. Accédez aux instructions pour les réseaux câblés qui commencent ci-dessous ou les instructions pour les réseaux sans fil qui commencent à la page 34. Réseau câblé ĞĞ Wired (Câblé) - Automatique Après avoir suivi les étapes 1 à 3 ci-dessus : 1.
Paramètres < Obtenir des valeurs de réglages du réseau > Vous pouvez aussi visualiser vos valeurs de Réglages réseau sur la plupart des ordinateurs Windows. Pour visualiser les valeurs des Réglages réseau, suivez ces étapes : ĞĞ Sans fil (Général) - Automatique Après les étapes 1 à 3 dans "Configuration de votre connexion au réseau" à la page 33. 1. Sélectionnez Démarrer sur l'écran Network Settings, puis appuyez sur le bouton v. Le produit recherche et affiche la liste des réseaux disponibles.
ĞĞ Sans fil (Général) - Manuel 2. 3. 4. 5. 6. 7. 8. 9. Sélectionnez Démarrer sur l'écran Réglages réseau, puis appuyez sur le bouton v. Le produit recherche et affiche la liste des réseaux disponibles. Sélectionnez le réseau désiré, puis appuyez sur le bouton v. Sélectionnez Suivant, puis appuyez sur le bouton v à nouveau. Sur l'écran Sécurité, entrez le code de sécurité ou la phrase de passe correspondant à votre réseau.
Paramètres 5. Vous avez trois façons de terminer la connexion Wi-Fi : • Via le périphérique Wi-Fi. • Via le produit utilisant PBC. • Via le produit utilisant un PIN. Chacune est exposée ci-dessous. Via le périphérique Wi-Fi 1. 2. 3. Sur le périphérique Wi-Fi, suivez la procédure sur le périphérique pour connecter un autre périphérique Wi-Fi Direct. Reportez-vous au manuel d'utilisation du périphérique pour les instructions.
L'écran Réglages AllShare liste les périphériques AllShare connectés à votre réseau et leur adresse IP. Dans cet écran, vous pouvez permettre à un périphérique d'accéder à votre produit, de refuser l'accès ou de supprimer le périphérique de la liste AllShare. 1. 2. 3. 4. 5. Sur l'écran d'accueil, sélectionnez Paramètres, puis appuyez sur le bouton v. Sélectionnez Réseau, puis appuyez sur le bouton v. Sélectionnez Paramètres AllShare, puis appuyez sur le bouton v.
Paramètres 3. 4. 5. 6. Lorsque le téléchargement est terminé, la fenêtre Demande de mise à niveau apparaît, proposant trois choix : Mettre à niveau maintenant, Mettre à niveau plus tard ou Ne pas mettre à niveau. Si vous sélectionnez Mettre à niveau maintenant, le produit procèdera à la mise à niveau du logiciel, puis s’éteindra et se rallumera automatiquement.
Par téléch. 2. 3. 4. Paramètres 1. 04 L’option Par télécharg. vous permet d’effectuer la mise à niveau à l’aide d’un fichier précédemment téléchargé sur le produit mais que vous n’aviez pas souhaité installer immédiatement ou d’un fichier téléchargé par le produit en Mode Veille. Lorsque le logiciel de mise à niveau a été téléchargé, le numéro de version du logiciel s'affiche à droite de l'option Par télécharg. Sélectionnez Par téléch., puis appuyez sur le bouton v.
Media Play Insérez un disque dans le tiroir 1. Placez délicatement un disque dans le tiroir, face imprimée dirigée vers le haut. La lecture commence automatiquement. 2. 3. 4. Sélectionnez Vidéos, Photos ou Musique, puis appuyez sur le bouton v. En fonction de la manière dont le contenu est classé, vous verrez soit des dossiers, des fichiers individuels ou les deux. Sélectionnez les fichiers désirés. Appuyez sur le bouton RETURN pour quitter un dossier ou pour revenir à l'écran d'accueil.
3 4 AllShare Play vous permet de lire des Vidéos, Photos ou de la Musique situées sur votre ordinateur ou vos périphériques compatibles DLNA, Facebook, SugarSync et Family Story sur le lecteur BD-HDD Combo avec une connexion au réseau. ||REMARQUE | \\ Une fois la connexion établie, vous pouvez lire la vidéo mais également transférer des données entre les périphériques à l'aide de la fonction Allshare. Pour plus d'informations, reportez-vous aux pages 48 à 50. 1. 2. 3.
Media Play • Caméra : Vous pouvez lire le contenu stocké sur votre caméra connectée. • DLNA : Vous pouvez lire le contenu stocké sur votre périphérique de stockage connecté. • Picasa : Vous pouvez lire le contenu stocké sur votre compte Picasa. • SugarSync : Vous pouvez lire le contenu dans le service Cloud avec lequel vous êtes enregistré. • Family Story : Vous pouvez lire le contenu stocké sur votre compte Family Story. • Facebook : Vous pouvez lire le contenu stocké sur votre compte Facebook. 5. 6. 7.
Ordinateur BD-HDD Combo Connexion AllShare Play Lecture des fichiers de l'ordinateur Lecture du contenu situé sur votre Smart Phone sur le lecteur BD-HDD Combo Vous pouvez visualiser les fichiers partagés de votre ordinateur sur le lecteur BD-HDD Combo. Vous pouvez obtenir des instructions détaillées pour l'utilisation de AllShare sur le site Web Samsung.com. Périphérique mobile Utilisez votre Smart Phone pour visualiser les fichiers stockés dans votre ordinateur, lus par le lecteur BD-HDD Combo.
Media Play Commande de la lecture vidéo POWER FUNCTION TV SOURCE RECEIVER TTX/MIX Vous pouvez commander la lecture du contenu vidéo stocké sur un DVD, un périphérique USB, un BD TV SUBTITLE INPUT périphérique mobile ou un ordinateur. En fonction du disque ou du contenu, certaines fonctions décrites 1 2 ne pas 3 être disponibles.
Recher. temps 2. Servez-vous des boutons numériques pour entrer le point temporel de destination, puis appuyez sur le bouton v. ||REMARQUE | \\ Vous pouvez également vous servir des boutons ◄► pour avancer dans le film ou le rembobiner. Le film effectue respectivement une avance ou un retour d'une minute à chaque fois que vous appuyez sur les boutons ◄►. Sélectionnez cette option pour répéter un titre, un chapitre ou une section spécifique.
POWER Media Play RECEIVER BD TV FUNCTION TV SOURCE SUBTITLE TTX/MIX INPUT 1 2 3 Commande de l'écoute de musique 4 5 6 Vous pouvez commander la lecture du contenu 7un DVD, 8 un9périphérique USB, musical stocké sur DISC MENU TITLE MENU un périphérique mobile ou ordinateur.
2. 3. 4. 5. 6. Lorsque l'écran Lecture est affiché, appuyez sur le bouton TOOLS. Le menu Outils s’affiche. Servez-vous des boutons ▲▼ pour sélectionner Lire sélection, puis appuyez sur le bouton v. L'écran Lire sélection s'affiche. Servez-vous des boutons ▲▼ pour sélectionner une piste, puis appuyez sur le bouton v. Une coche s'affiche à gauche de la piste sélectionnée. Répétez l'étape 3 pour sélectionner et vérifier les pistes supplémentaires.
Media Play Lecture des contenus photo Vous pouvez lire les contenus photo stockés sur un DVD, un périphérique USB, un périphérique mobile ou un ordinateur. Utilisation du menu Outils Pendant la lecture, appuyez sur le bouton TOOLS. Sélectionnez cette option pour accéder Liste des photos à la liste de photos stockées sur le support actuellement sélectionné. Lancer le diaporama Vit. diaporama Effet du diaporama Musique de fond activ. Sélectionnez cette option pour démarrer le diaporama.
Apparaît dans l'écran de la fonction Afficher. Sélectionnez cette option pour Date+ancienne trier puis afficher tous les fichiers photo ou vidéo sur un périphérique de stockage, depuis le plus ancien jusqu'au plus récent. Mensuel Apparaît dans l'écran de la fonction Afficher. Sélectionnez cette option pour trier tous les fichiers photo et vidéo stockés sur un périphérique de stockage selon leur mois de création.
Media Play Aj. Liste lect. (suite) Supprimer (Liste lect) • Sélectionnez la liste de lecture à laquelle vous souhaitez ajouter les pistes ou les fichiers, puis appuyez sur le bouton v. • Sélectionnez l'option Créer nouv, puis appuyez sur le bouton v. Sur le clavier contextuel qui s'affiche, créez un nom pour la nouvelle liste de lecture. Entrez les chiffres à l'aide des boutons numériques de la télécommande.
Fonctions de la télévision numérique FUNCTION TV SOURCE POWER Regarder les chaînes de télévision RECEIVER TTX/MIX FUNCTION POWER BD TV SUBTITLETV SOURCE INPUT 5 2 8 5 0 8 DISC MENU 7 DISC MENU 6 3 9 6 POPUP TITLE MENU 1 9 Mode Image TITLE MENU 0 POPUP TV MUTE 2 TV SOURCE TV MUTE CH LIST CH LIST 1 2 3 HOME GUIDE HOME GUIDE TV SOURCE Langue audio 3 Boutons NUMÉRIQUES : Pour aller directement sur une chaîne de télévision, appuyez sur le numéro de la chaîne désirée.
Fonctions de la télévision numérique Utilisation de la fonction PIP (Incrustation d’image) Vous pouvez regarder une autre chaîne de télévision avec la chaîne que vous regardez actuellement. 1. 2. 3. Lorsque vous regardez la télévision, appuyez sur le bouton PIP de la télécommande. L'écran PIP s'affiche. Si vous ne souhaitez pas utiliser la fonction PIP, appuyez sur le bouton PIP à nouveau lorsque cette fonction PIP est activée. Vous pouvez effectuer divers réglages pour PIP en utilisant le menu Outils.
Ecran des chaînes Utilisation du menu Outils Canal Tous 51 56 TF1 HD M6HD 801 FTA TV 1 Radio Données/autres Gratuit 803 3.10.6.4 TV 805 6.3.5. TV 2 807 6.3.5. TV 4 809 6.7 Per sistent... 811 BBC 813 CANAL+FILM 815 CANAL+Sport a Hertzien b Supprimer 1 2 3 Lorsque la chaîne est affichée, appuyez sur les boutons TOOLS. Sur l'écran d'accueil, sélectionnez Canal, puis appuyez sur le bouton v. 52 800 Modif. favoris Verrouil./Déverr France 2 HD 802 NOVA 804 6.
Fonctions de la télévision numérique 1. Gestionnaire prog. Appuyez sur le bouton GUIDE. L'écran guide s'affiche. • Écran Guide Guide 1 52 France 2 HD Vue chaînes - Tous Today 812 Class News 2 ▲ 813 814 3 815 ▼ 817 Coming Soon Discovery DiscoveryH&L heat Aucune information 9:05 - 9:35 Aucune information 2 3 4 5 6 4 5 1:00 – 2:00 1:00 – 2:00 Aucune information 1:00 – 2:00 3.
1 4 5 6 7 8 9 0 ! A B 1 : permet d'afficher la page secondaire disponible. 2 : permet d'afficher la page Teletext suivante. 3 : permet d'afficher la page Teletext précédente. 6 : permet d'afficher la page d'index (contenus) à tout moment en cours de visionnage de télétexte. D E 9 : permet de maintenir l'affichage sur la page en cours, dans le cas où il existe plusieurs pages secondaires qui s'affichent automatiquement à la suite de la première page.
Fonction avancée Enregistrement \\ Affichage de la capacité du disque dur Avant l'enregistrement • Veuillez vérifier le périphérique d'enregistrement par défaut et la capacité de stockage disponible pour l'enregistrement. (veuillez vous reportez à "Gestionnaire périph. stockage" à la page 28) • Au moins 100 Mo d'espace libre nécessaire pour l'enregistrement. • L'enregistrement s'arrête si l'espace libre de stockage devient inférieur à 50 Mo.
1. 4. 5. 6. 7. Bouton 2 : permet d'effectuer un saut pour accéder directement à la même scène sous TV direct. Bouton ◄ : permet d'effectuer un saut de lecture arrière à -10 sec de la position actuelle. Bouton ► : permet d'effectuer un saut de lecture avant à +10 sec de la position actuelle. Bouton 7 : permet de mettre en pause la scène tout en poursuivant l’enregistrement.
Fonction avancée Fonction Décalage -- La programmation s'arrête automatiquement lorsqu'un autre menu est sélectionné dans le menu Accueil. (Arrête les fonctions de programmation et d'historique en cours.) -- Si vous repassez à une chaîne Télévision numérique, cela relancera automatiquement la programmation, si vous n'avez pas accédé à un autre élément du menu (Home).
4. 7. Pour arrêter Timeshift 1. 2. 3. 4. 5. Si la barre de Timeshift n’est pas en mode pause ou anciens programmes, appuyez sur le bouton 5. Le message « Arrêter Timeshift? » s'affiche. Sélectionnez le bouton OK et appuyez sur le bouton v pour arrêter Timeshift. Si la barre Timeshift est en mode pause ou anciens programmes, le mode Timeshift sera remplacé par Direct TV dès que vous appuyez sur le bouton 5. Appuyez sur le bouton 5 à nouveau, le même message que dans l’image ci-dessus s’affiche.
Fonction avancée Fractionnement de la section d’un titre (suppression partielle) Suivez les étapes 1 à 3 de la section « Édition du titre enregistré ». 1. Sélectionnez Suppr part., puis appuyez sur le bouton v. AllShare Play TV enreg. | Suppr part. | Sans titre Partie 1 00:00:00 Partie 2 00:00:00 00:00:33 / 00:08:21 + Commandes lecture 2. 3. 4. 5. Démarrer Fin Supprimer Retour Rech. scène < Passer > Dépl. " Enter Appuyez sur le bouton v au point de départ.
||REMARQUE | La fonction Profond 3D vous permet de régler la profondeur 3D des conversions 2D en 3D. Les valeurs varient de 1 à 10. Plus le réglage est élevé, plus la profondeur 3D est importante. 1. 2. 3. Lorsque vous visionnez des contenus convertis en 3D, appuyez sur le bouton TOOLS. Appuyez sur les boutons ▲▼ pour sélectionner Prof. 3D, puis appuyez sur le bouton v. Réglez l'option Profond 3D à l'aide des boutons ◄►.
Services réseau Vous pouvez profiter de différents services réseau tels que Smart Hub or BD-LIVE en connectant le produit au réseau. Smart Hub d'un coup d'œil 1 Lisez les instructions qui suivent avant de recourir à un service réseau. 1. 2. Connectez votre produit au réseau. (Voir page 20) Configurez les paramètres du réseau. (Voir pages 33 à 36) 1. Rendez-vous sur www.samsung.com. 3.
9 Le navigateur Web d’un coup d’œil 1 Samsung Apps : cette option vous permet de télécharger des services d'applications payants ou gratuits. 08 http://www.google.com/ Services réseau 0 Mes applications : affiche votre galerie personnelle des applications que vous souhaitez ajouter, modifier et supprimer. Utilisation du navigateur Web Vous pouvez accéder à Internet en utilisant l'application de navigateur Web qui est installée sur l'écran Smart Hub par défaut. 1. 2.
Services réseau 2 Aide à la navigation : affiche les boutons de la télécommande que vous pouvez utiliser pour naviguer dans de navigateur Web. • VERT (B) : pour afficher le panneau de commande. • JAUNE (C) : pour commuter le pointeur. • BLEU (D) : Pour utiliser la fonction PIP. • Tools : pour afficher la fenêtre Outils. • Exit : Pour quitter le navigateur Web.
Annexes Avis de conformité et de compatibilité 02230D-BD-E8900-XN-FRA.indd 65 Annexes Français 09 TOUS les disques ne sont PAS compatibles. • Selon les restrictions décrites ci-dessous ou mentionnées tout au long de ce manuel, y compris dans la section Types et caractéristiques de disque, les types de disque pouvant être lus sont comme suit : disques BD-ROM préenregistrés disponibles dans le commerce, DVD VIDÉO et CD audio (CD-DA) ; disques BD-RE/R, DVD-RW/-R et disques CD-RW/R.
Annexes Protection contre la copie • La norme de distribution de contenu et de gestion numérique des droits AACS (Advanced Access Content System) ayant été approuvée pour le format de disque Blu-ray tout comme le système de brouillage du contenu CSS (Content Scramble System) l'a été pour le format DVD, il existe certaines restrictions qui sont imposées, notamment en matière de lecture et de sortie du signal analogique, sur les contenus protégés par le système AACS.
09 Annexes LES CONTENUS ET SERVICES DE TIERS SONT FOURNIS « EN L'ÉTAT ». SAMSUNG N'OFFRE AUCUNE GARANTIE, NI EXPRESSE NI IMPLICITE, QUANT AUX CONTENUS ET SERVICES AINSI FOURNIS, QUELQUE QU'EN SOIT LA FINALITÉ. SAMSUNG REJETTE EXPLICITEMENT LES GARANTIES IMPLICITES, Y COMPRIS MAIS SANS Y ÊTRE LIMITÉ, LES GARANTIES QUANT À LA QUALITÉ MARCHANDE OU L’ADAPTABILITÉ À UN USAGE PARTICULIER.
Annexes -- Les appareils DivX Certified® peuvent lire des vidéos DivX® jusqu'à une résolution HD de 1080p, y compris les programmes d’appel. DivX®, DivX Certified® et les logos qui leur sont associés sont des marques déposées de Rovi Corporation et ses filiales dont l’utilisation fait l’objet d’une licence.
09 Annexes -- Par extension, vous, l'utilisateur final, fournissez toute information ou travaux originaux de composition à ajouter à Rovi Databases, vous représentez et garantissez que vous êtes le seul auteur de tels travaux et qu'en plus vous attribuez tous les droits de propriété à Rovi, y compris le droit d'enregistrer les droits d'auteur de tels travaux en tant que partie de Rovi Database. -- LA LICENCE ROVITECHNOLOGY ET CHAQUE ELEMENT DE ROVI DATA VOUS EST ACCORDEE "EN L'ETAT".
Annexes Informations complémentaires Remarque Paramètres 3D • Sur certains disques 3D, pour arrêter un film en cours de lecture 3D, appuyez une seule fois sur le bouton 5. La lecture du film est alors interrompue et l'option du mode 3D désactivée. Pour changer la sélection de l'option 3D lorsque vous lisez un film en 3D, appuyez sur le bouton 5 une seule fois. Le menu Blu-ray apparaît. Appuyez à nouveau sur le bouton 5, puis sélectionnez Réglages 3D dans le menu Blu-ray.
Connexion internet BD-Live 09 Annexes • Qu'est-ce qu'un certificat valide ?Lorsque le produit utilise le service BD-LIVE pour transmettre les données de disque ainsi qu'une demande de certification du disque au serveur, celui-ci utilise les données transmises pour vérifier la validité du disque avant de renvoyer le certificat vers le produit. • La connexion Internet peut être limitée lorsque vous utilisez les contenus de BD-LIVE.
Annexes Résolution selon le mode de sortie Lecture du disque Blu-ray/des e-contenus/des contenus numériques HDMI / connecté Type de contenu Configuration Mode HDMI Disque Blu-ray Résolution du disque Blu-ray BD Wise E-contents/ Contenus numériques Mode VIDÉO Mode VIDÉO 1080p 576i/480i - 576i/480i - 1080p 576i/480i - 1080i 576i/480i 576i/480i 576p/480p 576i/480i 576i/480i Résolution optimale de Résolution optimale de l'entrée du téléviseur l'entrée du téléviseur Auto 1080p 1080p
Visionnage sur télévision numérique DTV Smart Résolution « Auto.
Annexes Sélections des sorties numériques Configuration Connexion PCM Récepteur AV prenant en charge l'interface HDMI Jusqu'à PCM 7,1 ca Jusqu'à Dolby Digital PCM 7,1 ca Dolby Digital Jusqu'à Plus PCM 7,1 ca Flux de Jusqu'à données audio Dolby TrueHD PCM 7,1 ca sur disque Jusqu'à Blu-ray DTS PCM 6,1 ca DTS-HD High Jusqu'à Resolution PCM 7,1 ca Audio DTS-HD Jusqu'à Master Audio PCM 7,1 ca PCM PCM 2 ca Flux de Jusqu'à Dolby Digital données audio PCM 5,1 ca sur DVD Jusqu'à DTS PCM 6,1 ca PCM Dolby Digital
Résolution pour disque Blu-ray Aucune Récepteur AV prenant en charge l'interface HDMI Optique Décode la principale fonction audio et le flux de données audio BONUSVIEW en données PCM et ajoute des effets sonores de navigation. Bitstream (non traités) Récepteur AV prenant en charge l'interface HDMI Optique Émet uniquement le flux de données audio de la fonction principale, de sorte que le récepteur AV puisse décoder les trains de bits audio.
Annexes Dépannage Avant de requérir une réparation, essayez d'abord les points suivants. PROBLÈME SOLUTION La télécommande ne permet d'exécuter aucune opération. • Vérifiez les piles de la télécommande. Vous devez peut-être les remplacer. • Utilisez la télécommande à une distance maximale de 6,1 m du lecteur. • Retirez les piles et appuyez sur un ou plusieurs boutons pendant plusieurs minutes afin de procéder au drainage du microprocesseur de la télécommande pour la réinitialiser.
PROBLÈME SOLUTION L'image est bruyante ou déformée. • Assurez-vous que le disque n'est ni sale ni rayé. • Nettoyez le disque. Aucune sortie HDMI. • Vérifiez la connexion entre le téléviseur et la prise HDMI du produit. • Vérifiez que votre téléviseur prend en charge les résolutions d'entrée HDMI 480p, 720p, 1080i, 1080p. Écran de sortie HDMI anormal.
Annexes PROBLÈME BD-LIVE SOLUTION Je n'arrive pas à me connecter au serveur BD-LIVE. • Vérifiez si la connexion réseau a été établie ou pas en utilisant le menu État réseau. (Voir page 27) • Vérifiez si le périphérique de mémoire USB est connecté au produit. • Le périphérique de mémoire doit avoir au moins 1 Go d'espace libre pour héberger le service BD-LIVE. Vous pouvez vérifier la capacité disponible sous Gestion données Blu-ray.
Caractéristiques techniques Sortie vidéo Sortie audio Réseau Capacité du lecteur de disque dur Vidéo composite (analogique) Analogique Digital Ethernet LAN sans fil Sécurité WPS(PBC) BD-E8300 BD-E8500 BD-E8900 Annexes HDMI 3,2 Kg 430 (L) x 300 (P) x 59 (H) mm 09 Général Poids Dimensions Plage de températures de fonctionnement Plage de taux d'humidité Vidéo Audio +5°C à +35°C 10 % à 75 % Résolution : 1080p, 1080i, 720p, 576p/480p PCM, Bitstream Borne RCA, 1,0 Vp-p (charge 75 ohm) Résolution : 576i
FRANCE Cher Client, Nous vous remercions d’avoir acheté un produit SAMSUNG. Au cas où vous auriez besoin de notre service après-vente, nous vous invitons à retourner ce produit au revendeur qui en a effectué la vente.
Cet appareil est distribué par : Pour toute information ou tout renseignement complémentaire sur nos produits, notre service consommateurs est à votre disposition au : Vous pouvez également vous connecter à notre site Internet : http://www.samsung.com Cet appareil est garanti un an pièces et main d’oeuvre pour la France (métropolitaine) La facture d’achat faisant office de bon de garantie.
BD-E8300 BD-E8500 BD-E8900 BD-HDD Combo Bedienungsanleitung erleben sie die möglichkeiten Danke für den Kauf dieses Samsung Produkts. Registrieren Sie Ihr Produkt unter folgendem Link, und profitieren Sie von unserem umfassenden Kundenservice: www.samsung.com/register 02230D-BD-E8900-XN-GER.
Sicherheitsinformation Warnung ABDECKUNG ODER RÜCKWAND NICHT ÖFFNEN! STROMSCHLAGGEFAHR! TEILE IM GERÄTEINNEREN KÖNNEN VOM BENUTZER NICHT GEWARTET WERDEN. LASSEN SIE REPARATUREN NUR VON QUALIFIZIERTEM FACHPERSONAL DURCHFÜHREN. ACHTUNG Dieses Symbol weist auf eine „gefährliche Netzspannung“ im Inneren des Geräts hin. Es besteht die Gefahr von Stromschlägen und Verletzungen.
LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 10. 11. 12. Vorsichtsmaßnahmen Wichtige Sicherheitshinweise Lesen Sie diese Bedienungsanleitung sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen. Befolgen Sie alle folgenden Sicherheitshinweise. Halten Sie sie diese Bedienungsanleitung zur späteren Einsichtnahme griffbereit. 1. Lesen Sie diese Anweisungen. 3. Beachten Sie alle Warnhinweise. 2. 4. 5. 6. 7. 8. Bewahren Sie diese Anweisungen auf.
Sicherheitsinformation • Reinigung der Disks -- Wenn sich Fingerabdrücke oder Schmutz auf der Disk befinden, mit Seifenwasser und einem weichen Tuch reinigen. -- Beim Reinigen vorsichtig von innen in Richtung des Randes der Disk wischen. • Disk-Lagerung `` Setzen Sie die Disk keiner direkten Sonneneinstrahlung aus. `` Bewahren Sie die Disk an einem kühlen, gut belüfteten Ort auf. `` Bewahren Sie die Disk in einer sauberen Schutzhülle auf und lagern Sie sie senkrecht.
01 • Wenn Sie 3D-Inhalte genießen möchten, schließen Sie das 3D-Gerät (3D-fähiger AV-Receiver oder Fernsehgerät) über ein Hochgeschwindigkeits-HDMI-Kabel an den HDMI OUT Anschluss des Geräts an. Setzen Sie eine 3D-Brille auf, bevor Sie den 3D-Inhalt wiedergeben. • Das Gerät gibt 3D-Signale nur über an den HDMI OUT-Anschluss angeschlossene HDMIKabel wieder.
Inhalt Sicherheitsinformation 2 3 3 3 4 4 5 Warnung Vorsichtsmaßnahmen Wichtige Sicherheitshinweise Lagerung und Handhabung der Disks Vorsichtsmaßnahmen für den Betrieb 3D-Funktion verwenden Copyright Erste Schritte 8 8 8 8 9 9 10 13 14 14 15 Kompatible Disks und Formate Disktypen und Inhalte, die von Ihrem Gerät wiedergegeben werden können Disktypen, die von Ihrem Gerät nicht wiedergegeben werden können Verfügbare Aufnahmezeit für die interne Festplatte Regionalcode Logos der vom Gerät wiedergegebene
46 46 47 47 47 48 48 48 DTV Funktionen 51 51 52 52 52 53 53 53 54 54 Wiedergabe von Fernsehprogrammen Extras Menü verwenden PIP (Picture-In-Picture) Funktion verwenden Kanäle bearbeiten Kanalliste Sender Bildschirm Extras Menü verwenden Aufrufen des Programmführer Bildschirms Zeitplan-Manager Teletext Dienst verwenden Netzwerkdienste 62 62 63 64 64 64 Smart Hub verwenden Smart Hub Übersicht Webbrowser verwenden BD-LIVE™ Samsung Smart View Dual View Inhalt 46 46 46 Steuern der Musikwiedergabe Taste
Erste Schritte Kompatible Disks und Formate Disktypen und Inhalte, die von Ihrem Gerät wiedergegeben werden können Inhalt VIDEO MUSIK FOTO VIDEO MUSIK FOTO Medium Blu-ray Disc 3D Blu-ray Disc DVD-VIDEO DVD±RW/±R CD-RW/R CD-RW/R DVD±RW/±R BD-RE/R CD-RW/R DVD±RW/±R BD-RE/R HDD USB Details BD-ROM oder BD-RE/R Disk, aufgezeichnet im BD-RE Format. DVD-VIDEO, DVD±RW/±R Disks, die aufgenommen und abgeschlossen wurden. Medien mit DivX, MKV oder MP4 Inhalten.
HD SD 8Mbps (Normal) 20Mbps (High) 5Mbps (Normal) 10Mbps (High) 257 Std. 124 Std. 77 Std. 102 Std. 49 Std. 30 Std. 411 Std. 199 Std. 123 Std. 205 Std. 99 Std. 61 Std. ||HINWEIS | \\ Da die Timeshift und andere Funktionen des Geräts eine gewisse Menge an Speicherplatz auf der Festplatte benötigen, kann der vom "Speichergeräte Manager" im Einstellungen Menü angezeigte Gesamtspeicherplatz von der in der Bedienungsanleitung angegebenen Festplattenkapazität abweichen.
Erste Schritte Unterstützte Formate Unterstützte Videodatei Dateierweiterung *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.vob *.svi *.m2ts *.mts *.divx *.webm Container AVI MKV ASF MP4 3GP VRO VOB PS TS WebM Video Codec Divx 3.11/4.x/ 5.x/6.x MPEG4 SP/ ASP H.
-- Unterstützt WMA 10 PRO (Bis 5.1). -- Verlustfreies WMA Audio wird nicht unterstützt. -- QCELP / AMR NB/WB wird nicht unterstützt. -- Unterstützt Vorbis (bis 2 Kanäle), Unterstützt den Codec nur im Webm Container. -- Unterstützung von ADPCM IMA, MS. (MULAW, ALAW werden nicht unterstützt). ||HINWEIS | \\ Einige MKV- und MP4-Diskformate können möglicherweise nicht wiedergegeben werden. Dies hängt von deren Videoauflösung und der Bildfrequenz ab.
Erste Schritte • Das Gerät unterstützt das PTP-Protokoll. • Das USB-Gerät nicht während eines Ladevorgangs entfernen. • Je größer die Bildauflösung, desto länger dauert die Anzeige des Bildes. • Das Gerät kann keine MP3-Dateien mit DRM (Digital Rights Management) abspielen, die von kommerziellen Webseiten heruntergeladenen wurden. • Ihr Gerät unterstützt nur Videos mit einer Bildfrequenz von unter 30fps.
AVCHD (Advanced Video Codec Höchauflösung) 02 • Dieses Gerät kann Disks im AVCHD Format wiedergeben. Diese Disks werden normalerweise aufgezeichnet und in Camcordern verwendet. • Das AVCHD-Format ist ein hochauflösendes digitales Videokameraformat. • Das MPEG-4 AVC/H.264 Format komprimiert Bilder effizienter als das herkömmliche Bildkomprimierungsformat. • Einige AVCHD-Disks verwenden das „x.v.Color” Format. Dieses Gerät kann AVCHD-Disks wiedergeben, die „x.v.Color" verwenden. • „x.v.
Erste Schritte Vorderseite TASTE WIEDERGABE/ANHALTEN ENTER-TASTE STOPP TASTE NETZSCHALTER AUSWERFEN TASTE DISK-EINSCHUB ANZEIGE COMMON INTERFACE STECKPLATZ USB-HOST FERNBEDIENUNGSSENSOR ||HINWEIS | \\ Um die Firmware des Geräts über den USB-Anschluss zu aktualisieren, muss ein USB-Speicherstick verwendet werden. \\ Wenn das Gerät das Menü der Blu-ray-Disk anzeigt, kann der Film nicht über die Wiedergabe Taste am Gerät oder der Fernbedienung gestartet werden.
Fernbedienung Drücken, um ein Fernsehgerät zu betreiben. Drücken, um den BD-HDD Combo zu bedienen. Drücken Sie die Nummerntasten, um Optionen auszuführen oder um auf Kanäle direkt zuzugreifen. Zugriff auf das Disk-Menü. FUNCTION TV SOURCE POWER RECEIVER BD TV SUBTITLE TTX/MIX INPUT 1 2 3 4 5 6 7 8 DISC MENU 9 TITLE MENU 0 POPUP Drücken, um vorwärts- oder rückwärts zu springen. Stummschalten der TV-Lautsprecher. Drücken, um einen Fernsehkanal zu wählen.
Erste Schritte Die Fernbedienung für die Bedienung Ihres Fernsehgeräts einrichten 1. 2. 3. 4. Folgen Sie den nachstehenden Anweisungen, um festzustellen, ob Ihr Fernsehgerät kompatibel ist. Schalten Sie das Fernsehgerät ein. Richten Sie die Fernbedienung auf das Fernsehgerät. Drücken Sie die TV Taste um den TV-Modus einzustellen.
Anschlüsse Anschluss an ein Fernsehgerät über Audio/Videokabel und ein RF-Kabel Zu ANT IN Zum TV Antennenkabel R Rot W Weiß Y Gelb Anschlüsse 3. 4. Schließen Sie das RF-Kabel wie dargestellt an. Schließen Sie die Video/Audio Kabel an den VIDEO OUT (gelb) und AUDIO OUT (weiß und rot) Ausgang auf der Rückseite des Geräts und an die VIDEO IN (gelb) / AUDIO IN (weiß und rot) Anschlüsse Ihres Fernsehgeräts an. Schließen Sie das Gerät und das Fernsehgerät an die Stromversorgung an.
Anschlüsse Anschluss an ein Fernsehgerät 1. Schließen Sie Ihr Gerät mit einer der unten dargestellten Methoden an Ihr Fernsehgerät an. 3. Den Eingangswahlschalter auf der Fernbedienung Ihres Fernsehgeräts betätigen, bis das Signal des Geräts auf dem Bildschirm erscheint. 2. Schalten Sie das Gerät und das Fernsehgerät ein. -- Schließen Sie das Netzkabel erst an, wenn Sie alle anderen Verbindungen hergestellt haben. -- Wenn Sie die Anschlüsse ändern möchten, schalten Sie zuerst alle Geräte aus.
Anschluss an ein Audiosystem Drücken Sie den Eingangswahlschalter des angeschlossenen Audio-Systems und des Fernsehgerät solange, bis das Videosignal des Geräts auf dem Fernsehbildschirm erscheint und Sie den Ton über das Audio-System hören. Anschlüsse 3. Sie können das Gerät mit einer der drei im Folgenden dargestellten Methoden an ein Audio-System anschließen. Schalten Sie das Gerät, das Audio-System und das Fernsehgerät ein.
Anschlüsse Anschließen an einen Netzwerk Router WLAN-Netzwerk Sie können das Gerät mit Hilfe einer der im Folgenden beschriebenen Methoden mit Ihrem Netzwerk Router verbinden. Kabelnetzwerk Oder Wireless Router Breitbandmodem (mit integriertem Router) BreitbandDienste BreitbandDienste ||HINWEIS | \\ Wenn der WLAN-Router DHCP unterstützt, kann Ihr Gerät eine DHCP oder statische IP-Adresse für die Verbindung mit dem drahtlosen Netzwerk verwenden.
Einstellungen Die Einrichten Prozedur 3 5 Mit der Einrichten Prozedur können Sie die Sprache der Bildschirmanzeige und der Menüs einstellen, die Verbindung mit dem Heimnetzwerk konfigurieren, das zu Ihrem Fernsehgerät passende Bildschirmformat (Bildschirmgröße und Format) auswählen und die gewünschten Sender suchen. ||HINWEIS | \\ Wenn das Gerät zum ersten Mal mit dem Fernseher verbunden wird, schaltet sich das Gerät automatisch ein. Dieser Vorgang ist normal.
BD TV SUBTITLE INPUT 1 2 3 4 5 6 7 8 DISC MENU 9 TITLE MENU 0 POPUP Einstellungen Im Einstellungen Menü verwendete Fernbedienungstasten TV MUTE TV SOURCE CH LIST 1 HOME GUIDE 3 2 4 A 1 2 3 4 B C D HOME Taste : Drücken, um zum DIGITAL SUBTITLE INPUT Home-Menü zu SOCIAL REC REC PAUSE wechseln. SMART HUB SEARCH PANDORA 2D 3D SUBTITLE RETURN Taste : Rückkehr zum vorherigen Menü.
Einstellungen Menü Funktionen TV-Format Smart Hub Bildschirmgröße BD Wise Auflösung DTV-Smart-Auflösung Mit dieser Funktion kann die Bildausgabe des Geräts an die Bildschirmgröße Ihres Fernsehgeräts angepasst werden. Einstellungen 3D-Einstell. Sie können auswählen, ob eine Blu-ray Disk mit 3D-Inhalten im 3D-Modus wiedergeben soll. • Wenn Sie zum Home oder Smart Hub Home Bildschirm wechseln, während Sie sich im 3D Modus befinden, wird automatisch in den 2D Modus umgeschaltet.
Einstellungen Anzeige HDMI-Farbformat HDMI-Deep Color Progressiver Modus Audio Digital-Ausgang PCM-Downsampling Hier kann das Farbraumformat für die HDMI-Wiedergabe an die Möglichkeiten des angeschlossenen Geräts (Fernsehgerät, Bildschirm, usw.) angepasst werden. Mit dieser Option können Videos über die HDMI OUT Buchse mit der Deep Colour Farbtiefe wiedergeben werden. Deep Colour bietet genauere Farbwiedergabe mit größerer Farbentiefe.
||HINWEIS | \\ Für Benutzer, bei denen das Fernsehgerät das einzige tonerzeugende Gerät ist: -- Wenn das Fernsehgerät den Dolby Digital Bitstream Empfang über HDMI nicht unterstützt, sind keine besonderen Einstellungen erforderlich. -- Wenn das Fernsehgerät den Dolby Digital Bitstream Empfang über HDMI unterstützt, "Digital-Ausgang" auf "PCM" einstellen. In diesem Fall ist unter "Angeschl. Gerät" keine weitere Einstellung erforderlich.
Einstellungen Kanal TV-Empfang Mit dieser Einstellung kann der entsprechende Antennentyp für digitale Sendungen ausgewählt werden. Bevor Ihr Gerät mit der Speicherung der vorhandenen Kanäle beginnen kann, muss der Typ der Signalquelle festgelegt werden, die an das Gerät angeschlossen ist. Dient zur Änderung des Landes. Geben Sie das 4-stellige Passwort mit Hilfe der Nummerntasten ein. Das voreingestellte Passwort lautet 0000. Land Autom.
Netzwerk Wi-Fi-Direkt Soft-AP AllShare-Einstellungen Gerätename System Hiermit können Sie den aktuellen Zustand der Netzwerkund Internetverbindung prüfen. Mit dieser Funktion können Sie ein Wi-Fi Direkt Gerät an Ihr Gerät über ein Peer-to-Peer Netzwerk ohne einen WLANRouter anschließen. Mit Wi-Fi Direkt können Sie ein Gerät zu Steuerung anderer Geräte verwenden.
Einstellungen Die Funktion automatischen Datum Dienst Funktion aktivieren oder deaktivieren. System Datendienst Anynet+(HDMI-CEC) ||HINWEIS | \\ Dieses Menü kann angezeigt werden, wenn unter Land Deutschland, Österreich, Schweiz. Frankreich, Spanien, Belgien oder Niederlande eingestellt ist. \\ Datendienst erlaubt Ihnen die Nutzung von Informationen (Text, Standbilder, Grafiken, Dokumente, Software usw.
Device Manager Einstellungen ||HINWEIS | \\ Sie können die Tastatur nur dann verwenden, wenn ein QWERTY Tastatur Bildschirm oder Fenster im Webbrowser und Smart Hub erscheint. Mauseinstellungen : Hier können die Einstellungen für eine an das Gerät angeschlossene kabellose Maus vorgenommen werden. Sie können das Menü des Geräts mit der Maus auf die gleiche Weise bedienen, wie Sie es vom PC gewöhnt sind.
Einstellungen System Sicherheit Diese Funktion arbeitet mit Blu-ray-Disks und DVDs zusammen, denen eine Altersbeschränkung oder nummerische Beschränkung zugewiesen wurden, die die Freigabe des Inhalts angibt. Diese Zahlen helfen Ihnen, die Arten von Blu-ray-Disks und DVDs zu kontrollieren, die Ihre Familie ansehen darf. Wenn Sie auf diese Funktion zugreifen, wird der Sicherheitsbildschirm angezeigt. Geben Sie das Sicherheitspasswort ein. (Das voreingestellte Passwort lautet 0000).
System Common Interface Anzeige von DivX® VOD-Registrierungscodes, um DivX® VOD-Inhalt zu erwerben und wiedergeben. Zeigt das Informationsfenster für das CI Menü an. CI Menü : Der Benutzer kann aus dem vom CAM Anbieter zur Verfügung gestellten Menü auswählen. Wählen Sie das auf der PC Card basierende Menü aus. Anwendungsinfo : Zeigt Informationen auf dem in den CI-Steckplatz eingelegten CAM (Conditional Access Module) und auf der in das CAM eingelegten "CI CAM mit CI oder CI+CARD" an.
Einstellungen ||HINWEIS | System \\ Dieses Gerät funktioniert mit CI und CI+CAM. Dieses Gerät ist nicht mit allen CAMs aller lokalen DVB-T Anbieter kompatibel. \\ Wenn das eingelegte CAM nicht richtig funktioniert, ziehen Sie die CAM CARD aus dem Gerät und führen Sie sie erneut in den Schlitz ein. Common Interface \\ Wenn ein Popup Fenster mit einer der folgenden Meldungen erscheint. (Dies ist keine Fehlfunktion des Geräts. Bitte wenden Sie sich an Ihren Dienstanbieter für weitere Informationen.) 1.
Netzwerke und das Internet 1. 2. 3. 4. Wählen Sie auf dem Home Bildschirm Einstell., und drücken Sie die v Taste. Wählen Sie Netzwerk, und drücken Sie die v Taste. Wählen Sie Netzwerkeinstellungen, und drücken Sie die v Taste. Fahren Sie mit den Anweisungen für Kabelnetzwerke fort oder gehen Sie zur Seite 34, um mit den Anweisungen für drahtlose Netzwerke fortzufahren. Kabelnetzwerk ĞĞ Kabelnetzwerk - Automatisch Nachdem Sie die obigen Schritte 1 bis 3 befolgt haben: 1.
Einstellungen < Abrufen der Werte für die Netzwerkeinstellungen > Sie können sich die Werte für die Netzwerkeinstellungen auf den meisten Windows Computern anzeigen lassen. Um die Werte für die Netzwerkeinstellungen aufzurufen, folgen Sie bitte diesen Schritten: ĞĞ 1. • Windows XP 1. 2. 3. 4. WLAN (Allgemein) - Automatisch Befolgen Sie die Schritte 1 bis 3 unter "Konfigurieren Ihrer Netzwerkverbindung" auf Seite 33.
ĞĞ WLAN (Allgemein) - Manuell 2. 3. 4. 5. 6. 7. 8. 9. Wählen Sie Start auf dem Netzwerkeinstellungen Bildschirm und drücken Sie anschließend die v Taste. Das Gerät sucht nach verfügbaren Netzwerken und zeigt diese in einer Liste an. Wählen Sie das gewünschte Netzwerk aus und drücken Sie anschließend die v Taste. Wählen Sie Weiter, und drücken Sie erneut die v Taste. Geben Sie im Sicherheitsbildschirm Ihren Sicherheitscode oder das Passwort ein.
Einstellungen 5. Es stehen drei Wege zur Verfügung, die WiFiVerbindung abzuschließen: • Über das Wi-Fi Gerät. • Über dieses Gerät mit Hilfe von PBC. • Über dieses Gerät mit Hilfe einer PIN. Jede dieser Möglichkeiten wird im Folgenden beschrieben. Über das Wi-Fi Gerät 1. 2. 3. Folgen Sie auf dem Wi-Fi Gerät den Anweisungen für den Anschluss an ein anderes Wi-Fi Direkt Gerät. Schlagen Sie in der Bedienungsanleitung des Geräts für weitere Anweisungen nach.
Das AllShare Einstellungen Fenster listet alle an das Netzwerk angeschlossenen AllShare Geräte und deren IP-Adressen auf. Über diesen Bildschirm können Sie einem Gerät erlauben, eine Verbindung zu diesem Gerät herzustellen, den Zugriff verweigern oder ein Gerät aus der AllShare Liste entfernen. 1. 2. 3. 4. 5. Wählen Sie auf dem Home Bildschirm Einstell., und drücken Sie die v Taste. Wählen Sie Netzwerk, und drücken Sie die v Taste. Wählen Sie AllShare-Einstellungen, und drücken Sie die v Taste.
Einstellungen 3. 4. 5. 6. Wenn der Download abgeschlossen ist, wird das Upgrade Anfragefenster mit drei Auswahlmöglichkeiten angezeigt: Akt. jetzt, Akt. später oder Nicht akt. Wenn Sie Akt. jetzt wählen, aktualisiert das Gerät die Software, schaltet sich ab und anschließend automatisch wieder ein. Wenn Sie innerhalb einer Minute keine Auswahl treffen oder Akt. später auswählen, speichert der Player das Software Upgrade. Sie können das Upgrade später mit Hilfe der Über Download Funktion durchführen.
Über Download 2. 3. 4. Einstellungen 1. 04 Die Option Über Download ermöglicht das Update mit einer Datei, die das Gerät bereits früher heruntergeladen hat, Sie sich jedoch entschieden haben, diese Datei nicht sofort zu installieren, oder mit einer Datei, die das Gerät im Standby-Modus heruntergeladen hat. Wenn eine Upgrade Software heruntergeladen wurden, erscheint die Nummer der Softwareversion auf der rechten Seite von Über Download. Wählen Sie Über Download, und drücken Sie die v Taste.
Media Play Einlegen einer Disk in das Disk Fach 1. Legen Sie die Disk vorsichtig mit der bedruckten Seite nach oben in das Disk Fach ein. Die Wiedergabe beginnt automatisch. 2. 3. 4. Wählen Sie Videos, Fotos, oder Musik, und drücken Sie die v Taste. Je nachdem, wie der Inhalt angeordnet ist, sehen Sie entweder Ordner, einzelne Dateien oder beides. Wählen Sie die gewünschten Dateien. Drücken Sie die RETURN Taste, um einen Ordner zu verlassen oder um zum Home Bildschirm zurückzukehren. ||HINWEIS | 2.
3 4 Art des Inhalts : Sie können die Art des gewünschten Inhalts auswählen. Mit der AllShare Play können Sie Videos, Fotos oder Musik von Ihrem PC oder DLNA kompatiblen Gerät, Facebook, SugarSync und Family Story über das Netzwerk mit dem BD-HDD Combo wiedergeben.
Media Play • Camera : Sie können auf angeschlossenen Kameras gespeicherte Inhalte wiedergeben. • DLNA : Sie können auf angeschlossenen Speichergeräten gespeicherte Inhalte wiedergeben. • Picasa : Sie können auf Picasa gespeicherte Inhalte wiedergeben. • SugarSync : Wenn Sie sich registriert haben, können Sie Inhalte auf dem Cloud Dienst wiedergeben. • Family Story : Sie können auf Family Story gespeicherte Inhalte wiedergeben. • Facebook : Sie können auf Facebook gespeicherte Inhalte wiedergeben. 5. 6. 7.
PC BD-HDD Combo AllShare Play Verbindung Wiedergabe der PC-Dateien Wiedergabe von Inhalten auf Ihrem Smart Phone auf dem BD-HDD Combo Sie können freigegebene Dateien auf Ihrem Computer über Ihren BD-HDD Combo wiedergeben. Auf der Webseite www.samsung.com erhalten Sie ausführliche Anweisungen für die Nutzung von AllShare. Mobiles Gerät Verwenden Sie Ihr Smart Phone um auf Ihrem PC gespeicherte Dateien über den BD-HDD Combo wiederzugeben.
Media Play Steuern der Videowiedergabe POWER FUNCTION TV SOURCE RECEIVER TTX/MIX Sie können die Wiedergabe vonINPUT Videoinhalten auf DVDs, USB-Geräten, mobilen Geräten oder dem PC steuern. BD TV SUBTITLE Je nach Disk oder Inhalt können einige in dieser Anleitung beschriebenen Funktionen nicht zur Verfügung stehen.
Wiederholmod. ||HINWEIS | \\ Sie können ebenfalls die ◄► Tasten verwenden, um den Film vor- oder zurückzuspulen. Durch jedes Drücken der ◄► Tasten wird der Film um eine Minute vor- oder zurückgespult. Mit dieser Option kann ein Titel, Kapitel oder ein bestimmter Abschnitt wiederholt werden. -- Aus : Kehrt zur normalen Wiedergabe zurück. -- Titel : Wählen Sie diese Einstellung, um einen gewählten Titel zu wiederholen. -- Kapitel : Wählen Sie diese Einstellung, um ein bestimmtes Kapitel zu wiederholen.
FUNCTION TV SOURCE POWER Media Play RECEIVER BD TV SUBTITLE TTX/MIX INPUT 1 2 3 Steuern der Musikwiedergabe 4 5 6 Sie können die Wiedergabe von auf DVDs, 7 Geräten 8 9oder dem PC USB-Geräten, mobilen DISC MENU TITLE MENU gespeicherten Musiktiteln0steuern.
Wiedergabeliste für eine CD erstellen 3. 4. 5. 6. ||HINWEIS | \\ Sie können auf Audio CDs (CD-DA) eine Wiedergabeliste mit maximal 99 Titeln erstellen. \\ Wenn Sie eine Wiedergabeliste erstellt haben, wird im Extras Menü Auswahl wdg durch Wdg.-L. bearb. ersetzt. \\ Auf dem Auswahl wiedergeben Bildschirm können Sie ebenfalls Alles auswählen, Alle abwählen und Abbruch auswählen. -- Verwenden Sie Alles auswählen, um alle Titel auszuwählen. Dadurch wird die Auswahl einzelner Titel abgebrochen.
Media Play Anzeigen von Fotos Sie können auf DVDs, USB-Geräten, mobilen Geräten oder dem PC gespeicherte Fotos anzeigen. Extras Menü verwenden Drücken Sie während der Wiedergabe die TOOLS Taste. Zur Fotoliste Diashow starten DiashowGeschw. Wählen Sie diese Option, um zu der Liste der Fotos auf dem eingelegten Medium zu wechseln. Startet die Diashow. Wählen Sie diese Option, um die Geschwindigkeit der Diashow einzustellen.
Monatlich Erscheint im Bildschirm der Ansicht Funktion. Nach Auswahl dieser Option werden alle Fotos oder Videos auf einem Speichergerät vom jüngsten bis zum spätesten Datum sortiert angezeigt. Erscheint im Bildschirm der Ansicht Funktion. Wählen Sie diese Option, um alle Fotos oder Videos auf dem Speichergerät nach Erstellungsmonat sortiert anzuzeigen. Senden Mit der Auswahl Wiedergabe Funktion können Sie bestimmte Musik-, Videound Fotodateien für die Wiedergabe auswählen.
Media Play Zu W.-Li. hinz. (Fortsetzung) • Wählen Sie die Wiedergabeliste aus, zu der Sie die Titel oder Dateien hinzufügen möchten und drücken Sie die v Taste. • Wählen Neu erst. und drücken Sie die v Taste. In dem erscheinenden Tastatur Popup-Fenster einen Namen für die neue Wiedergabeliste eingeben. Mit Hilfe der Nummerntasten auf der Fernbedienung die Nummern eingeben. Geben Sie die Buchstaben mit Hilfe der ▲▼◄► Tasten ein und drücken Sie anschließend die v Taste.
DTV Funktionen FUNCTION TV SOURCE POWER Wiedergabe von Fernsehprogrammen RECEIVER TTX/MIX FUNCTION POWER BD TV SUBTITLETV SOURCE INPUT TV 4 1 7 4 DISC MENU 7 DISC MENU SUBTITLE 5 2 8 5 0 8 INPUT 6 3 9 6 POPUP TITLE MENU 1 9 TITLE MENU 0 POPUP TV MUTE 2 TV SOURCE TV MUTE CH LIST CH LIST 1 2 HOME GUIDE HOME GUIDE TV SOURCE NUMMER Tasten : Um direkt zu einem Fernsehsender zu wechseln, geben Sie die Nummer des gewünschten Senders ein.
DTV Funktionen PIP (Picture-In-Picture) Funktion verwenden Sie können einen anderen Fernsehkanal gleichzeitig mit dem gerade angesehenen Fernsehkanal anschauen. 1. 2. 3. Wenn Sie einen Fernsehsender ansehen, drücken Sie die PIP Taste auf der Fernbedienung. Der PIP Bildschirm wird angezeigt. Kanäle bearbeiten Kanalliste 1. Wenn Sie den PIP Bildschirm wieder ausblenden möchten, müssen Sei die PIP Taste erneut drücken.
Sender Bildschirm Wählen Sie auf dem Home Bildschirm Kanal, und drücken Sie die v Taste. Kanal Alle 56 TF1 HD M6HD 801 FTA TV 1 51 803 3.10.6.4 TV Radio 805 6.3.5. TV 2 Daten/Andere Kostenlos 807 6.3.5. TV 4 809 6.7 Per sistent... 811 BBC 813 CANAL+FILM 815 CANAL+Sport a Terrestrisch b Entfernen 1 2 3 52 800 France 2 HD 804 6.10B Bad Rec... 808 6.3.5. TV 5 2 Kanalnr.
DTV Funktionen 1. Drücken Sie die GUIDE Taste. Der TV-Programm Bildschirm wird angezeigt. • Programmführer Bildschirm TV-Prog... 1 2 52 France 2 HD Keine Information 9:05 - 9:35 Keine Information 812 813 814 3 815 ▼ 817 Class News Coming Soon Discovery 3 4 5 6 5 DiscoveryH&L heat Keine Information Keine Information Keine Information i Information ƒ Seite " Ansehen 6 Zeigt das Bild des Kanals an. Zeigt den Anzeige Modus an. Zeigt die gespeicherten Sender an.
1 4 5 6 7 8 9 0 ! A B 1 : Zeigt die verfügbare Unterseite an. 2 : Zeigt die nächsten Teletext Seite an. 3 : Zeigt die vorherige Teletext Seite an. 6 : Zeigt die Seite mit dem Index (Inhalt) an. 0 : Stellt den Teletext Modus ein (LIST/FLOF). Wenn die Taste im LIST Modus gedrückt wird, wird in den Speichermodus umgeschaltet. In diesem Modus können Sie Teletext Seiten mit Hilfe der Taste 8 (Speichern) in einer Liste abspeichern.
Fortgeschrittene Funktionen Aufnahme Vor der Aufnahme • Prüfen Sie bitte das zu verwendende Aufnahmegerät und den auf dem Aufnahmegerät zur Verfügung stehenden Speicherplatz. (Schlage Sie bitte unter “Speichergerätemanager" auf Seite 28 nach.) • Für die Aufnahme ist wenigstens 100MB freier Speicherplatz erforderlich. • Die Aufnahme wird beendet, wenn weniger als 50MB freier Speicherplatz zur Verfügung steht.
1. 5. 6. 7. Ansehen anderer Kanäle während der Aufnahme Während der Aufnahme eines Fernsehprogramms können ebenfalls andere Sender angeschaut werden. Drücken Sie während der Aufnahme die PROG Taste oder die Nummerntasten um zu dem Sender zu schalten, den Sie sich ansehen möchten. ||HINWEIS | \\ Während der Aufnahme eines gebührenfreien Senders können Sie sich einen anderen gebührenfreien oder einen verschlüsselten Sender ansehen.
Fortgeschrittene Funktionen Timeshift Funktion -- Time Shift wird automatisch gestoppt, wenn ein anderes Menü aus dem Home Menü ausgewählt wird. (Die laufenden Time Shift und Verlauf Funktionen werden gestoppt.) -- Wenn zu einem Digital TV Sender zurückgekehrt wird, wird Time Shift automatisch fortgesetzt, wenn auf keinen anderen Menüpunkt des Home Menüs zugegriffen wurde.
4. 7. Beenden von Timeshift 1. 2. 3. 4. 5. Wenn sich der Timeshift Balken nicht im Pause Modus befindet oder eine bereits gesendete und aufgezeichnete Szene angesehen wird, die 5 Taste drücken. Die Meldung "Wollen Sie Timeshift anhalten?" wird angezeigt. 2. 3. 4. 2. 3. Wenn eine bereits gesendete und von Timeshift aufgezeichnete Szene angesehen wird oder die Timeshift Wiedergabe unterbrochen ist, wird durch Drücken der 5 Taste an die gerade aufgezeichnete Stelle gesprungen.
Fortgeschrittene Funktionen Aufteilen und teilweises Löschen eines Titels Folgen Sie den Schritten 1 bis im Kapitel 'Bearbeiten aufgenommener Sendungen'. 1. Wählen Sie Teilw. löschen und drücken Sie anschließend die v Taste. AllShare Play TV-Aufzeichnung 00:00:00 Start Teil 2 Ende 00:00:00 00:00:33 / 00:08:21 + Wiederg.-Steuerung 2. 3. 4. 5. Entfernen Zurück Szenensuche < Wechsel > Vers. " Eingabe Drücken Sie die v Taste am Startpunkt.
||HINWEIS | Mit der 3D-Tiefe Funktion können Sie die 3D-Tiefe bei der Umwandlung von 2D nach 3D einstellen. Die Werte reichen von 1 bis 10 Je höher die Nummer, desto höher ist die 3D-Tiefe. 1. 2. 3. Wenn Sie sich umgewandelte 3D Inhalte ansehen, drücken Sie die TOOLS Taste. Wählen Sie mit Hilfe der ▲▼ Tasten 3D-Tiefe, und drücken Sie anschließend die v Taste. Stellen Sie mit Hilfe der ◄► Tasten die 3D-Tiefe ein.
Netzwerkdienste Sie können verschiedene Netzwerkdienste wie Smart Hub oder BD-LIVE in Anspruch nehmen, wenn Sie das Gerät an ein Netzwerk anschließen. Smart Hub Übersicht 1 Lesen Sie sich die folgende Anleitung durch, bevor Sie irgendeinen Netzwerkdienst verwenden: 1. 2. Schließen Sie das Gerät an ein Netzwerk an. (Siehe Seite 20) Die Netzwerkeinstellungen konfigurieren. (Siehe Seiten 33~36) 1. 2. 3. 4. 5. 6. Besuchen Sie www.samsung.com.
9 Der Webbrowser im Überblick 1 Samsung Apps : Sie können diverse kostenpflichtige oder kostenlose Anwendungen herunterladen. 08 http://www.google.com/ Netzwerkdienste 0 Meine Anwendungen : Zeigt Ihre persönliche Sammlung von Anwendungen an, die Sie ergänzen, bearbeiten oder löschen können. Webbrowser verwenden Sie können mit Hilfe des im Smart Hub Bildschirm integrierten Webbrowsers auf das Internet zugreifen. 1. 2.
Netzwerkdienste 2 Navigationshilfe : Zeigt die Tasten auf der Fernbedienung an, die für die Navigieren im Webbrowser verwendet werden können. • GRÜN (B) : Zeigt die Systemsteuerung an. • GELB (C) : Schaltet den Zeiger um. • BLAU (D) : Zum Einschalten der PIP-Funktion. • Tools : Ruft das Extras Fenster auf. • Exit : Verlassen des Webbrowsers. BD-LIVE™ Sobald das Gerät mit dem Netzwerk verbunden ist, können sie bei Verwendung einer BD-LIVE fähigen Disk verschiedene filmbezogene Serviceinhalte genießen. 1.
Anhang Übereinstimmungs- und Kompatibilitätshinweis 02230D-BD-E8900-XN-GER.indd 65 Anhang Deutsch 09 NICHT ALLE Disks sind kompatibel • Entsprechend der nachfolgend und in der gesamten Anleitung, einschließlich des Abschnitts Merkmale der einzelnen Datenträger, aufgeführten Beschränkungen, können folgende Disktypen wiedergegeben werden: im Handel erhältliche, bespielte BD-ROM, DVD-VIDEO, und Audio CD (CD-DA); BD-RE/R, DVD-RW/-R; und CD-RW/R.
Anhang Kopierschutz • Da AACS (Advanced Access Content System) als Kopierschutzverfahren für das BD-Format anerkannt ist, ähnlich dem CSS (Content Scramble System) für das DVD-Format, gelten für AACS-geschützte Inhalte bestimmte Beschränkungen bezüglich Wiedergabe, analogem Ausgangssignal usw. Die Funktionen und Beschränkungen für dieses Produkt können sich je nach Kaufdatum unterscheiden, weil diese Beschränkungen möglicherweise nach der Herstellung des Geräts von AACS übernommen oder geändert wurden.
09 Anhang DIE INHALTE UND DIENSTE VON DRITTPERSONEN WERDEN "WIE GESEHEN" ZUR VERFÜGUNG GESTELLT. SAMSUNG ÜBERNIMMT WEDER DIREKT NOCH INDIREKT UND UNTER KEINEN UMSTÄNDEN KEINE GARANTIE FÜR DIE DERART ZUR VERFÜGUNG GESTELLTEN INHALTE UND DIENSTE. SAMSUNG LEHNT AUSDRÜCKLICH ALLE INDIREKTEN GEWÄHRLEISTUNGSPFLICHTEN, EINSCHLIEESLICH JEDOCH NICHT AUSSCHLIESSLICH DER GEWÄHRLEISTUNGSPFLICHT FÜR DIE VERKEHRSFÄHIGKEIT ODER EIGUNUNG FÜR EINEN BESTIMMTEN ZWECK AB.
Anhang -- DivX-Certified® für die Wiedergabe von DivX® -Videos mit einer Auflösung bis zu HD 1080p, einschließlich Premium-Inhalt DivX®, DivX Certified® und die dazugehörigen Logos sind Markenzeichen von Rovi Corporation oder ihrer Tochtergesellschaften und sind urheberrechtlich geschützt.
09 Anhang -- Für den Fall, dass Sie, der Endnutzer, irgendwelche Informationen oder Originalwerke deren Urheber Sie sind, für das Hinzufügen zu den Rovi Datenbanken bereitstellen, erklären und garantieren Sie, dass Sie der einzige Autor dieses/dieser Werks/Werke sind und übertragen hiermit alle Urheberrechte, einschließlich des Rechts die Urheberrechte auf dieses Werk/diese Werke als Teil der Rovi Datenbank zu registrieren, auf Rovi.
Anhang Zusätzliche Informationen Hinweis 3D-Einstell. • Bei einigen 3D Disks muss zum Anhalten des Films währen einer 3D Wiedergabe die 5 Taste einmal gedrückt werden. Der Film wird angehalten und der 3D-Modus wird deaktiviert. Um eine 3D Option während der Wiedergabe eines 3D-Films zu ändern, die 5 Taste einmal drücken. Das Blu-ray Menü wird angezeigt. Drücken Sie die 5 Taste erneut und wählen Sie anschließend die 3D-Einstellungen im Blu-ray-Menü aus.
BD-Live Internet-Verbindung 09 Anhang • Was ist ein gültiges Zertifikat? Wenn das Gerät BD-LIVE verwendet, um die Disk-Daten und eine Anfrage an den Server für die Zertifizierung der Disk zu senden, verwendet der der Server die übertragenden Daten um zu prüfen, ob die Disk gültig ist und sendet das Zertifikat zurück an das Gerät. • Die Internetverbindung kann während der Nutzung der BD-LIVE-Inhalte eingeschränkt sein.
Anhang Auflösung nach Wiedergabemodus Bei der Wiedergabe von Blu-ray Disk/E-content/Digital Content Setup HDMI / verbunden Art des Inhalts HDMI Modus E-contents/ Digital contents Videomodus Videomodus 1080p 576i/480i - Max. Auflösung des TV-Eingangs Max.
DTV View Auto DTV Smart Auflösung "Auto" DTV Smart Auflösung "Aus" 1080p 1080i 720p 576p/480p 576i/480i HDMI Modus 1080p Auflösung des Übertragungssignals Maximale Auflösung des TV-Eingangs 1080p Videomodus 576i/480i HDMI / nicht verbunden Videomodus - 576i/480i - 576i/480i - 1080i 576i/480i 576i/480i 576p/480p 576i/480i 576i/480i 720p - 576i/480i - Anhang BD Wise HDMI / verbunden 09 Ausgang Auflösung 576i/480i 576i/480i ||HINWEIS | \\ Die DTV Smart Auflösung wird nur aktiv
Anhang Auswahl des Digitalausgangs Setup Anschluss HDMIfähiger AV Receiver Bis zu 7.1 Kanal Bis zu 7.1 Dolby Digital Kanal Dolby Digital Bis zu 7.1 Plus Kanal Bis zu 7.1 Dolby TrueHD Kanal Bis zu PCM DTS 6.1 Kanal DTS-HD High Bis zu 7.1 Resolution Kanal Audio DTS-HD Bis zu 7.1 Master Audio Kanal PCM 2 PCM Kanal Bis zu PCM Dolby Digital 5.1 Kanal Bis zu PCM DTS 6.
PCM Blu-ray DiscDefinition Alle Optisch HDMIfähiger AV Receiver Optisch Bitstream (DTS Re-encoded) Bitstream (Dolby D Re-encoded) HDMI-fähiger HDMI-fähiger AV AV Receiver Receiver oder oder Optisch Optisch Decodiert den Decodiert den Hauptaudio und Hauptaudio und nur den Haupttonspur Decodiert den Hauptaudio Gibt BONUSVIEW Audio BONUSVIEW Audio wieder, sodass Ihr AVund BONUSVIEW Audio Strom zusammen Strom zusammen Receiver das Audiosignal Strom zusammen in in PCM Audio, fügt in PCM Audio, fügt deco
Anhang Problembehebung Bevor Sie sich an den Kundendienst wenden, versuchen Sie bitte die folgenden Lösungsvorschläge. PROBLEM LÖSUNG Die Fernbedienung funktioniert nicht. • Überprüfen Sie die Batterien der Fernbedienung. Ersetzen Sie die Batterien, falls erforderlich. • Verwenden Sie die Fernbedienung in einer Entfernung von maximal 6,1 m zum Fernsehgerät.
PROBLEM LÖSUNG Das Bild rauscht oder ist verzerrt • Überprüfen Sie die Disk auf Verunreinigungen oder Kratzer. • Reinigen Sie die Disk. Keine HDMI-Ausgang. • Prüfen Sie die Verbindung zwischen dem Fernsehgerät und dem HDMIAnschluss des Geräts. • Überprüfen Sie, ob Ihr Fernsehgerät die HDMI-Eingangsauflösungen 480p/720p/1080i/1080p unterstützt. Ungewöhnliche HDMI-Wiedergabe.
Anhang PROBLEM BD-LIVE Keine Verbindung zum BD-LIVE Server. LÖSUNG • Prüfen Sie mit Hilfe des Netzwerkstatus Menüs, ob der Aufbau der Netzwerkverbindung erfolgreich war. (Siehe Seite 27) • Überprüfen Sie, ob das USB-Speichergerät mit dem Gerät verbunden ist. • Das Speichergerät muss für den BD-LIVE-Service mindestens über 1GB freien Speicherplatz verfügen. Sie können die verfügbare Größe im BD-Datenmanagement prüfen.
Technische Daten Video Ausgang Audioausgang Netzwerk Festplattenkapazität Composite Video (Analog) Analogue Digital Ethernet Wireless LAN Sicherheit WPS(PBC) BD-E8300 BD-E8500 BD-E8900 Anhang HDMI 3.2 Kg 430 (W) X 300 (D) X 59 (H) mm +5°C bis +35°C 10 % bis 75 % Resolution : 1080p, 1080i, 720p, 576p/480p PCM, Bitstream RCA Anschluss, 1.
DEUTSCHLAND Auf dieses Samsung-Produkt wird vom Hersteller eine vierundzwanzigmonatige Garantie gegen Material- und Verarbeitungsfehler gegeben. Die Garantiezeit beginnt mit dem Kauf des Gerätes beim Fachhändler. Sollte es erforderlich werden, Garantieleistungen in Anspruch zu nehmen, wenden Sie sich bitte an den Fachhändler, bei dem Sie das Gerät erworben haben.
Kontakt zu Samsung Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben, wenden Sie sich bitte an den SamsungKundendienst. Area ALBANIA AUSTRIA Contact Centre 42 27 5755 0810 - SAMSUNG (7267864, € 0.
BD-E8300 BD-E8500 BD-E8900 BD-HDD Combo gebruiksaanwijzing user manual imagine mogelijkheden the possibilities Bedanktyou Thank voor for het purchasing aanschaffen this Samsung van dit Samsung-product. product. To receive Voor een uitgebreidere more complete service service, please kunt u uw register product yourregistreren product atop www.samsung.com/register 02230D-BD-E8900-XN-NL.
Informatie over veiligheid Waarschuwing OM HET RISICO OP ELEKTRISCHE SCHOKKEN TE BEPERKEN, DIENT U DE BEHUIZING (OF DE ACHTERZIJDE) NIET TE VERWIJDEREN. DIT APPARAAT BEVAT GEEN ONDERDELEN DIE DOOR DE GEBRUIKER KUNNEN WORDEN ONDERHOUDEN OF GEREPAREERD. LAAT ONDERHOUD EN REPARATIES OVER AAN EEN GEKWALIFICEERDE MONTEUR. LET OP Dit symbool duidt op gevaarlijke spanning binnen het product. Deze spanning brengthet risico van elektrische schokken of persoonlijke verwonding met zich mee.
LASERPRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 Voorzorgsmaatregelen Belangrijke veiligheidsinstructies Lees deze bedieningsinstructies zorgvuldig door voordat u het apparaat gebruikt. Volg elk van onderstaande veiligheidsinstructies. Houd deze instructies bij de hand voor toekomstig gebruik. 1. 2. 3. 4. 5. 6. 7. 8. Lees de volgende instructies door. Bewaar deze instructies goed. Let op alle waarschuwingen. Volg alle instructies op. Gebruik dit apparaat niet in de buurt van water.
Informatie over veiligheid • Discs reinigen -- Als er vingerafdrukken of vuil op de disc zitten, kunt u hem reinigen met een mild schoonmaakmiddel, verdund in water, en afvegen met een zachte doek. -- Wrijf bij het reinigen zachtjes vanaf het midden naar de buitenrand van de disc. • Discs bewaren `` Bewaar de disc niet in direct zonlicht. `` Bewaar de disc in een koele, geventileerde omgeving. `` Bewaar de disc in een schone beschermhoes en in verticale positie.
01 • Als u 3D-beeldmateriaal wilt bekijken, moet u een 3D-apparaat (AV-receiver of tv met 3D-functionaliteit) door middel van een highspeed HDMI-kabel aansluiten op de poort HDMI OUT van het product. Zet een 3D-bril op voordat u het 3D-beeldmateriaal afspeelt. • Het product verstuurt 3D-signalen alleen via een HDMI-kabel die is aangesloten op de poort HDMI OUT. • In de 3D-afspeelmodus wordt de videoresolutie ingesteld conform de resolutie van de oorspronkelijke 3D-video.
Inhoud Informatie over veiligheid 2 3 3 3 4 4 5 Waarschuwing Voorzorgsmaatregelen Belangrijke veiligheidsinstructies Opslag en beheer van discs Waarschuwingen voor gebruik De 3D-functie gebruiken Copyright Aan de slag 8 8 8 8 9 9 10 13 14 14 15 Compatibiliteit van disc en indeling Disctypen en inhoud die door uw product kunnen worden afgespeeld Disctypen die uw product niet kan afspelen Beschikbare opnametijd voor interne HDD Regiocode Logo's van discs die door het product kunnen worden afgespeeld Ond
46 46 46 46 47 47 47 48 48 48 DTV-functies 51 51 52 52 52 53 53 53 54 54 TV-kanalen bekijken Het menu Extra gebruiken De PIP-functie (Picture-In-Picture of Beeld-inbeeld) gebruiken Kanalen bewerken Kanalenlijst Kanalenscherm Het menu Extra gebruiken Het gidsvenster bekijken Schemamanager De teletekstdienst gebruiken Netwerkservices 62 62 63 64 64 64 Werken met Smart Hub Smart Hub in vogelvlucht De webbrowser gebruiken BD-LIVE™ Samsung Smart View Dual View Inhoud 46 Bedieningselementen voor het afs
Aan de slag Compatibiliteit van disc en indeling Disctypen en inhoud die door uw product kunnen worden afgespeeld Inhoud VIDEO MUZIEK FOTO VIDEO MUZIEK FOTO Medium Blu-ray-disc 3D Blu-ray-disc DVD-VIDEO DVD±RW/±R CD-RW/R CD-RW/R DVD±RW/±R BD-RE/R CD-RW/R DVD±RW/±R BD-RE/R HDD USB Details BD-ROM of BD-RE/R disc opgenomen in de indeling BD-RE. DVD-VIDEO, DVD±RW/±R-discs die werden opgenomen en gefinaliseerd. Media met DivX-, MKV- of MP4-inhoud.
SD 257 uur 124 uur 77 uur 102 uur 49 uur 30 uur 411 uur 199 uur 123 uur 205 uur 99 uur 61 uur ||OPMERKING | \\ Omdat Timeshift en andere geïmplementeerde functies van dit product een zekere hoeveelheid ruimte op de vaste schijf nodig hebben die intern wordt toegewezen, is het mogelijk dat de totale grootte die wordt weergegeven in het menu "Beheer opslagapparaat" of het menu Instellingen verschilt van de capaciteit van de vaste schijf zoals weergegeven in de handleiding.
Aan de slag Ondersteunde indelingen Ondersteunde videobestanden Bestandsextensie *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.vob *.svi *.m2ts *.mts *.divx *.webm Houder AVI MKV ASF MP4 3GP VRO VOB PS TS WebM Videocodec Divx 3.11/4.x/ 5.x/6.x MPEG4 SP/ ASP H.
-- Ondersteunt WMA 10 PRO (tot 5.1). -- Biedt geen ondersteuning voor WMA lossless audio. -- Biedt geen ondersteuning voor QCELP/AMR NB/WB. -- Ondersteunt vorbis (tot 2 kanalen), ondersteunt codec alleen in webm-container. -- Ondersteunt ADPCM IMA, MS. (MULAW, ALAW worden niet ondersteund) ||OPMERKING | \\ Bepaalde MKV- en MP4-discs worden mogelijk niet afgespeeld. Dit is afhankelijk van de videoresolutie en de beeldsnelheid.
Aan de slag • Het product biedt ondersteuning voor het PTPprotocol. • Koppel een USB-apparaat niet los tijdens het "laad"-proces. • Hoe hoger de beeldresolutie, des te langer het duurt voordat het beeld wordt weergegeven. • Dit product kan geen MP3-bestanden met DRM (Digital Rights Management) afspelen, gedownload van een commerciële site. • Uw product ondersteunt alleen video met een framesnelheid van maximaal 30 fps.
AVCHD (Advanced Video Codec High Definition) 02 Aan de slag • Dit product kan discs met een AVCHD-indeling afspelen. Deze discs worden normaal gesproken in camcorders gebruikt voor het maken van opnamen. • De indeling AVCHD is een indeling voor videogegevens met een hoge definitie. • In de indeling MPEG-4 AVC/H.264 worden beelden gecomprimeerd met hogere efficiëntie dan conventionele indelingen voor beeldcompressie. • Sommige AVCHD-discs gebruiken de indeling ""x.v.Color".
Aan de slag Voorpaneel AFSPELEN/PAUZEREN AAN/UIT ENTER STOPPEN ALGEMENE INTERFACE-SLEUF EJECT-TOETS DISCSLEUF DISPLAY USB-AANSLUITING SENSOR VOOR AFSTANDSBEDIENING ||OPMERKING | \\ Om de software van het product te upgraden via de USB-hostaansluiting moet u een USB-geheugenstick gebruiken. \\ Op het moment dat het product het menu van een Blu-ray Disc weergeeft, kunt u de film niet starten door op de toets Afspelen op het product of afstandsbediening te drukken.
Extern beheer Druk hierop om de tv te bedienen. Druk hierop om BD-HDD Combo te bedienen. Gebruik de cijfertoetsen om de opties te bedienen of direct toegang te krijgen tot kanalen. Hiermee geeft u het discmenu weer. FUNCTION TV SOURCE POWER RECEIVER BD TV SUBTITLE TTX/MIX INPUT 1 2 3 4 5 6 7 8 DISC MENU 9 TITLE MENU 0 POPUP Achteruit of vooruit springen. Druk hierop om het afspelen te onderbreken of de functie Timeshift te onderbreken.
Aan de slag De afstandsbediening instellen voor het bedienen van uw TV 1. 2. 3. 4. Voer de onderstaande instructies uit om te bepalen of uw televisie compatibel is. Zet de televisie aan. Richt de afstandsbediening op de televisie. Druk op de knop TV om de tv-stand in te stellen. Houd de knop TV POWER ingedrukt en voer met de cijferknoppen de tweecijferige code in die overeenkomt met het merk van de televisie. Als de televisie compatibel is met de afstandsbediening, wordt deze uitgeschakeld.
Verbindingen Verbinding maken met een tv via A/V-kabels (Audio/Video) en een RF-kabel 3. 4. Sluit de RF-antennekabel aan zoals weergegeven. Verbind de aansluitingen VIDEO OUT (geel) / AUDIO OUT (wit en rood) op de achterzijde van het product door middel van video-/audiokabels met de aansluitingen VIDEO IN (geel) / AUDIO IN (wit en rood) van de tv. Sluit het netsnoer van het product en de tv aan. Zet het product en de tv aan. Naar ANT IN R Rood W Wit Y Naar tv RF-kabel Aansluitingen 2. 03 1.
Aansluitingen Aansluiten op een tv 1. Sluit het product aan op uw tv met behulp van één van de methodes die hieronder getekend staan. 3. Druk op de knop voor het selecteren van de ingang op de afstandbediening van uw TV totdat het signaal van het product op het tv-scherm wordt weergegeven. 2. Zet het product en de tv aan. -- Sluit de stroomkabel pas aan als u alle andere aansluitingen gemaakt hebt. -- Wanneer u de aansluitingen wijzigt, moet u eerst alle apparaten uitschakelt.
Aansluiten op een audiosysteem 3. Druk net zo lang op de knop voor invoerselectie van uw aangesloten audiosysteem en TV totdat het videosignaal van het product wordt weergegeven op uw tv-scherm en u het geluid door uw audiosysteem hoort. Aansluitingen 2. U kunt het product op een audiosysteem aansluiten via een van de drie methodes die hieronder geïllustreerd staan. Zet het product, het audiosysteem en de tv aan. -- Sluit de stroomkabel pas aan als u alle andere aansluitingen gemaakt hebt.
Aansluitingen Aansluiten op een netwerkrouter Draadloos netwerk U kunt uw product op uw netwerkrouter aansluiten via een van de methodes die hieronder geïllustreerd staan. Bedraad netwerk Draadloze router Of Breedbandmodem (met ingebouwde router) Breedbandservice Breedbandservice ||OPMERKING | \\ Als de draadloze router ondersteuning biedt voor DHCP, kan het product gebruikmaken van een DHCP of statisch IPadres om verbinding te maken met het draadloze netwerk.
Instellingen De installatieprocedure 3 4 `` Een optie in het Home-scherm selecteren: Met de installatieprocedure stelt u het OSD en de menutalen in, configureert u de verbinding met uw thuisnetwerk, kiest u de juiste beeldverhouding voor de uitvoer (schermformaat en indeling) naar uw tv en zoekt u de gewenste kanalen. 1. Geluid Kanaal \\ Wanneer het product voor het eerst op de tv wordt aangesloten, wordt het product automatisch ingeschakeld. Dit is normaal.
BD TV SUBTITLE INPUT 1 2 3 4 5 6 7 8 DISC MENU 9 TITLE MENU 0 POPUP Instellingen Toetsen op de afstandsbediening voor het menu Instellingen TV MUTE TV SOURCE 1 CH LIST HOME GUIDE 3 2 4 A 1 2 3 4 B C D Knop HOME : Druk hierop naar het hoofdmenu DIGITAL SUBTITLEom INPUT SOCIAL REC REC PAUSE te gaan. SMART HUB SEARCH PANDORA 2D 3D SUBTITLE Knop RETURN : Terug naar het vorige menu.
Functies van het menu Instellingen Beeldverhouding Schermformaat Smart Hub BD Wise Resolutie Hiermee kunt u het beeld van het product aanpassen aan de schermgrootte van uw tv. Instellingen 3D-instell. U kunt selecteren of een Blu-ray-disc met 3D-inhoud in de 3D-modus moet worden afgespeeld. • Indien u in de 3D-modus naar het startscherm of het startscherm van Smart Hub gaat, schakelt het product automatisch over naar 2D.
Instellingen Weergave HDMI-kleurformaat HDMI diepe kleur Progressieve functie Geluid Digitaal UIT audio PCM-downsampling Dynamisch bereik instellen Downmixingfunctie Modus DTS Neo:6 Audio-sync. Hiermee kunt u het formaat voor de kleurruimte voor HDMI-uitvoer instellen in overeenstemming met de mogelijkheden van het aangesloten apparaat (tv, beeldscherm, enz.). U kunt beelden via de uitgang HDMI OUT laten versturen met Diepe kleur.
||OPMERKING | \\ Voor gebruikers wiens enige apparaat met geluidsuitvoer hun tv is: -- Indien de tv geen Dolby Digital bitstream-invoer via HDMI ondersteunt, zijn geen specifieke instellingen vereist. -- Indien de tv Dolby Digital bitstream-invoer via HDMI ondersteunt, moet u "Digitaal UIT audio" instellen op "PCM". Op die manier hoeft u geen verdere instellingen te specificeren onder "Verbonden apparaat".
Instellingen Kanaal Antenne Hiermee wordt een geschikte antenne voor digitale uitzendingen geselecteerd. Voordat de beschikbare kanalen in het geheugen van het product kunnen worden opgeslagen, moet u het type signaalbron opgeven dat op dit product is aangesloten. Selecteer deze optie als u het land wilt wijzigen. Voer het gewenste wachtwoord van 4 cijfers in met de cijfertoetsen. Het wachtwoord is standaard ingesteld op 0000.
Netwerk Wi-Fi Direct Soft AP AllShare-instellingen Apparaatnaam Systeem Instellingen Netwerkstatus Configureer de netwerkaansluiting zodat u allerlei functies kunt gebruiken zoals internetservices of AllShare Wi-Fi-functionaliteit en voer software-upgrades uit. Hiermee kunt u het huidige netwerk en de internetstatus controleren. Hiermee kunt u een Wi-Fi Direct-apparaat op het product aansluiten via een peer-to-peer-netwerk, zonder draadloze router.
Instellingen Systeem Schakel de functie voor automatische uitvoering van de dataservice, waarmee de dataservice automatisch wordt geactiveerd, in of uit. ||OPMERKING | \\ Dit menu kan worden weergegeven wanneer het land is ingesteld op Duitsland, Oostenrijk, Zwitserland, Frankrijk, Spanje, België en Nederland. \\ Met Dataservice kunt u informatie (tekst, foto's, afbeeldingen, Dataservice documenten, software enz.
Instellingen Apparaatbehee ||OPMERKING | \\ U kunt het toetsenbord alleen gebruiken wanneer er een QWERTY-toetsenscherm of -venster wordt weergegeven in de webbrowser en Smart Hub. Muisinstellingen : hiermee kunt u een draadloze USBmuis configureren die op het product is aangesloten. U kunt de muis op dezelfde manier als op uw computer gebruiken in het menu van het product.
Instellingen Systeem Beveiliging Deze functie werkt bij Blu-ray-discs/DVD's waaraan een leeftijdcategorie of een numerieke rating is toegekend om aan te geven voor welke leeftijdsgroepen de inhoud geschikt is. Aan de hand van deze cijfers kunt u instellen welke Blu-ray-discs/DVD's door uw gezin kunnen worden bekeken. Wanneer u deze functie kiest, wordt het beveiligingsscherm weergegeven. Voer het wachtwoord van het kinderslot in. (Het standaardwachtwoord is 0000.) DTV-kanaalvergr.
Systeem \\ Deze functie is alleen beschikbaar als het product is verbonden met het netwerk Instellingen ||OPMERKING | 04 Algemeen U kunt de onderstaande opties aanpassen aan uw voorkeuren. Geavanc. muziek kopie : Wanneer u muziekbestanden kopieert, kunnen gegevens automatisch worden bijgewerkt. De kopieertijd kan toenemen. Transp. menu : Pas de transparantie van het menuvak aan.
Instellingen ||OPMERKING | Systeem \\ Dit product werkt met CI en CI+ CAM. Bij bepaalde lokale DVB-T-installaties is dit product echter mogelijk niet volledig compatibel met alle typen CAM. \\ Als de ingebrachte CAM niet goed werkt, haalt u de CAM CARD uit het apparaat en plaatst deze terug in de sleuf. Algemene interface \\ Indien een pop-upbericht verschijnt, moet u de onderstaande stappen volgen. (Dit is geen defect aan het product. Neem contact op met uw serviceprovider voor meer informatie.) 1. 2.
Netwerken en het internet 1. 2. 3. 4. Selecteer in het startscherm Instellingen en druk vervolgens op v. Ga naar de instructies voor bedrade netwerken hieronder of de instructies voor draadloze netwerken vanaf pagina 34. Bedraad netwerk ĞĞ Bedraad - Automatisch Nadat u stap 1 tot 3 hierboven hebt gevolgd: 1. Netwerkinstellingen Bekabelde netwerkverbinding mislukt. MAC-adres XX:XX:XX:XX:XX:XX IP-adres 0.0.0.0 Subnetmasker 0.0.0.0 Gateway 0.0.0.0 DNS-server 0.0.0.
Instellingen < De waarden voor de netwerkinstellingen opvragen > U kunt de waarden voor uw netwerkinstellingen bekijken op de meeste Windows-computers. Om de waarden voor uw netwerkinstellingen te bekijken, volgt u deze stappen: ĞĞ Draadloos (Algemeen) - Automatisch Nadat u stap 1 tot 3 bij "Uw netwerkverbinding configureren" op pagina 33 hebt gevolgd. 1. Selecteer Start in de Netwerkinstellingen en druk vervolgens op v.
ĞĞ Draadloos (Algemeen) - Handmatig 2. 3. 4. 5. 6. 7. 8. 9. Selecteer Start in het scherm Netwerkinstellingen en druk vervolgens op v. Het product zoekt vervolgens de beschikbare netwerken en geeft er een lijst van weer. 1. 2. Selecteer het gewenste netwerk en druk vervolgens op de knop v. Selecteer Volgende en druk vervolgens op v. Voer op het scherm Beveiliging de beveiligingscode of het wachtwoord voor uw netwerk in. Voer cijfers rechtstreeks in met de cijfertoetsen op de afstandsbediening.
Instellingen 5. Er zijn drie manieren om de Wi-Fi-verbinding te leggen: • Via het Wi-Fi-apparaat. • Via het product met behulp van PBC. • Via het product met behulp van een pincode. Hieronder vindt u de uitleg voor elke methode. Via het Wi-Fi-apparaat 1. 2. 3. Op het Wi-Fi-apparaat volgt u de procedure op het apparaat om verbinding te maken met een ander Wi-Fi Direct-apparaat. Raadpleeg de gebruikershandleiding van het apparaat voor instructies.
In het scherm AllShare-instellingen ziet u een lijst van uw AllShare-apparaten die met het netwerk verbonden zijn en hun IP-adressen. Via dit scherm kunt u een apparaat toegang geven tot het product, de toegang weigeren, of het apparaat uit de AllShare-lijst verwijderen. 1. 2. 3. 4. 5. Selecteer in het startscherm Instellingen en druk vervolgens op v. Selecteer Netwerk en druk vervolgens op v. Selecteer AllShare-instellingen en druk vervolgens op v. Selecteer Apparatenlijst en druk vervolgens op v.
Instellingen 3. 4. 5. 6. Wanneer het downloaden is voltooid, verschijnt een upgradevenster met drie opties: Nu upgraden, Later upgraden of Niet upgraden. Als u Nu upgraden selecteert, wordt de software bijgewerkt en het product automatisch uit- en weer ingeschakeld. Als u niet binnen een minuut een keuze maakt of Later upgraden selecteert, slaat het product de nieuwe upgradesoftware op. U kunt de software dan later bijwerken met de functie Met gedownload (bestand).
Via download 2. 3. 4. Instellingen 1. 04 Met de optie Via download kunt u de upgrade uitvoeren met een bestand dat het product eerder heeft gedownload maar u niet onmiddellijk hebt laten installeren, of met een bestand dat door het product in de stand Stand-by is gedownload (zie Downloaden in Stand-by verderop). Als upgradesoftware is gedownload, ziet u het versienummer van de software rechts naast Met gedownload (bestand). Selecteer Via download en druk vervolgens op v.
Media Play Plaats een disc in de disclade 1. 2. Plaats voorzichtig een disc in de lade, met het etiket naar boven. Het afspelen begint automatisch. Raadpleeg "Het scherm AllShare Play openen" op pagina's 40-41 indien het afspelen niet automatisch begint. ||OPMERKING | \\ In de modus tv-weergave werkt de knop 6 als Timeshift en heeft hij dus niet zijn oorspronkelijke functie van weergave, zelfs als er een disc is geplaatst.
3 4 Met AllShare Play kunt u video's, foto's of muziek afspelen die op uw pc of uw apparaten compatibel met DLNA, Facebook, SugarSync en Family Story op de BD-HDD Combo met netwerkverbinding staan. Als u AllShare in combinatie met uw pc of DLNAapparaat wilt gebruiken, moet u de AllShare-software op uw pc installeren. ||OPMERKING | \\ Wanneer de verbinding eenmaal is gelegd, kunt u de video-inhoud niet alleen afspelen, u kunt ook gegevens tussen apparaten overzetten met de Allshare-functie.
Media Play • Camera : u kunt inhoud afspelen die op de aangesloten camera is opgeslagen. • DLNA : u kunt inhoud afspelen die op het aangesloten opslagapparaat is opgeslagen. • Picasa : u kunt inhoud afspelen die op Picasa is opgeslagen. • SugarSync : U kunt inhoud afspelen op de cloudservice waarbij u geregistreerd bent. • Family Story : u kunt inhoud afspelen die in Family Story is opgeslagen. • Facebook : u kunt inhoud afspelen die op Facebook is opgeslagen. ||OPMERKING | 5. 6. 7. 8. 9.
PC BD-HDD Combo Verbinding met AllShare Play Speel de bestanden van een pc af Inhoud op uw smartphone afspelen op de BD-HDD Combo U kunt gedeelde bestanden van uw computer op uw BD-HDD Combo bekijken. U vindt gedetailleerde instructies voor het gebruik van AllShare op de website Samsung.com. Mobiel apparaat BD-HDD Combo Gebruik uw smartphone om bestanden te bekijken die op uw computer zijn opgeslagen en die worden afgespeeld door de BD-HDD Combo.
Media Play Bedieningselementen voor het afspelen van video FUNCTION TV SOURCE POWER RECEIVER TTX/MIXbeheren die op een dvd, USB, mobiel apparaat of pc staan. Afhankelijk U kunt het afspelen van video's TV SUBTITLE INPUT van de disc of deBDinhoud is het mogelijk dat bepaalde functies die in deze handleiding worden beschreven, niet beschikbaar 1 2 3zijn.
Tijd zoeken 2. Gebruik de cijfertoetsen om het gewenste tijdpunt op te geven en druk vervolgens op v. ||OPMERKING | Beeldmodus \\ U kunt ook de toetsen ◄► om de film vooruit of achteruit te spoelen. De film wordt telkens als u op toetsen ◄► drukt, één minuut vooruit- of achteruitgespoeld. Selecteer deze optie om een titel, hoofdstuk of bepaalde sectie te herhalen. -- Uit : de disc wordt weer normaal afgespeeld. -- Titel : de geselecteerde titel wordt herhaald.
FUNCTION TV SOURCE POWER Media Play RECEIVER BD TV SUBTITLE TTX/MIX INPUT 1 2 3 voor het Bedieningselementen afspelen van4muziek 5 6 9 U kunt het afspelen7van 8 de muziekinhoud beheren DISC MENU TITLE MENU die op een dvd, USB, mobiel apparaat of pc staat.
Een afspeellijst van een cd maken 1. v drukt, worden alle nummers weergegeven in het scherm Muziek afspelen. De speler begint met het afspelen van alle nummers, beginnend bij Track 001. -- Gebruik Niets select. om de selectie van de nummers in een keer ongedaan te maken. Selecteer vervolgens afzonderlijke nummers of gebruik Alles selecteren om alle nummers te selecteren. Druk vervolgens op de toets RETURN op uw afstandsbediening of selecteer 6 en druk op v.
Media Play Foto's bekijken U kunt foto's bekijken die op een dvd, USB, mobiel apparaat of pc staan. Het menu Tools gebruiken Druk tijdens het afspelen op de toets TOOLS. Ga naar fotolijst Begin diashow Snelh. Diashow Effect presentatie Selecteer deze optie om naar de lijst met foto's op het huidige medium te gaan. Selecteer deze optie om een diavoorstelling te starten. Selecteer deze optie om een snelheid in te stellen voor een diashow.
Wordt weergegeven in het scherm van de functie Bekijken. Selecteer deze optie Vroegste datum om alle foto's en videobestanden op een opslagapparaat te sorteren en weer te geven van de vroegste tot de laatste datum. Maand. Wordt weergegeven in het scherm van de functie Bekijken. Selecteer deze optie om alle foto's of videobestanden op het opslagapparaat te sorteren op basis van de maand waarin ze zijn gemaakt. Verzenden Met Selectie afsp. kunt u bepaalde muziek-, video- en fotobestanden weergeven.
Media Play Toev. afspllst (vervolg) Verwijderen (afspeellijst) • Selecteer de afspeellijst waaraan u de nummers of bestanden wilt toevoegen en druk vervolgens op v. • Selecteer Nwe maken en druk vervolgens op v. Geef met het pop-uptoetsenbord dat wordt weergegeven, een naam voor de afspeellijst op. Gebruiker de cijfertoetsen op de afstandsbediening om nummers op te geven. Om letters op te geven, gebruikt u de toetsen ▲▼◄► om de cursor te verplaatsen en drukt u vervolgens op v.
DTV-functies FUNCTION TV SOURCE POWER TV-kanalen bekijken RECEIVER TTX/MIX FUNCTION POWER BD TV SUBTITLETV SOURCE INPUT TV 4 1 7 4 DISC MENU 7 DISC MENU SUBTITLE 5 2 8 5 0 8 INPUT 6 3 9 6 POPUP TITLE MENU 1 Beeldmodus 9 TITLE MENU 0 ||OPMERKING | \\ Dit menu wordt niet weergegeven wanneer u de functie BD Wise gebruikt.
DTV-functies De PIP-functie (Picture-In-Picture of Beeld-in-beeld) gebruiken U kunt een ander televisiekanaal zien samen met het tv-kanaal dat u momenteel bekijkt. 1. 2. 3. Terwijl u tv kijkt, drukt u op de knop PIP op de afstandsbediening. Het PIP-scherm wordt weergegeven. Als u geen PIP wilt gebruiken, drukt u opnieuw op de knop PIP terwijl PIP ingeschakeld is. U kunt allerlei instellingen voor PIP invoeren via het menu Tools.
Kanalenscherm Het menu Extra gebruiken Selecteer in het startscherm Kanaal en druk vervolgens op v. Kanaal Alle 56 TF1 HD M6HD 801 FTA Tv 1 51 Radio Gegevens/ Overig Vrij 803 3.10.6.4 TV 805 6.3.5. TV 2 807 6.3.5. TV 4 809 6.7 Per sistent... 811 BBC 813 CANAL+FILM 815 CANAL+Sport 52 800 France 2 HD 804 6.10B Bad Rec... 808 6.3.5. TV 5 1 2 3 2 810 Aplikace MHP 812 CANAL+ 814 CANAL+FILM2 816 CNN a Ant b Verwijderen i Informatie ƒ Pagina " Select.
DTV-functies 1. Schemamanager Druk op de knop GUIDE. Het gidsscherm wordt weergegeven. • Gidsscherm Gids 1 52 France 2 HD Geen informatie 9:05 - 9:35 Geen informatie Kan.weergave - Alles Vandaag 812 Class News 2 ▲ 813 814 3 815 ▼ 817 Binnenkort Discovery DiscoveryH&L heat 2 3 4 5 6 4 5 1:00 – 2:00 1:00 – 2:00 Geen informatie 1:00 – 2:00 1:00 – 2:00 1. 2. Geen informatie Geen informatie 3. Geen informatie Geen informatie a Schemabeh.
1 4 5 6 7 8 9 0 ! 4 : hiermee wordt de tekst in de bovenste helft van het scherm twee keer zo groot weergeven. Druk nogmaals op deze toets om naar de tekst in de onderste helft van het scherm te gaan. Druk nogmaals op deze toets voor een normale weergave. 9 : hiermee blijft de huidige pagina weergegeven, in het geval er meerdere secundaire pagina's zijn die automatisch achtereenvolgend worden weergegeven. Druk nogmaals op deze toets om het opvolgen te hervatten.
Geavanceerde functie Opnemen \\ Weergave van HDD-capaciteit Voor opname • Controleer het standaardopnameapparaat en de beschikbare opslagruimte op het opslagapparaat voor opname. (raadpleeg "Beheer opslagapparaat" op pagina 28.) • Er is ten minste 100MB vrije ruimte vereist voor opname. • De opname wordt stopgezet indien de vrije opslagruimte minder dan 50MB wordt. Beschikbare opslagruimte controleren Als u de beschikbare opslagruimte bij Opgenomen tv-prog.
1. 4. 5. 6. 7. 2-toets : Hiermee springt u naar dezelfde scène met live-tv. Toets ◄ : Hiermee springt u naar - 10 sec. vanaf de huidige positie. Toets ► : Hiermee springt u naar + 10 sec. vanaf de huidige positie. 7-toets : Hiermee onderbreekt u de scène terwijl de opname blijft doorgaan. 5-toets : Als u de vorige scène aan het bekijken bent, springt het afspeelpunt naar dezelfde scène met live-tv. Als u dezelfde scène bekijkt met live-tv, wordt het opnemen gestopt.
Geavanceerde functie Timeshift-functie -- Timeshift stopt automatisch wanneer een andere menu wordt geselecteerd in het menu Start. (De actieve functies Timeshift en Geschiedenis worden stopgezet.) -- Als u terugkeert naar een digitaal tv-kanaal, wordt Timeshift automatisch hervat, indien geen enkel ander menupunt van het menu Start wordt geopend. U kunt een live tv-programma onderbreken of het tv-programma gaan bekijken vanaf het beginpunt waarop u de functie Timeshift hebt gestart.
4. 7. 7-toets : Hiermee onderbreekt u de scène terwijl Timeshift blijft doorgaan. 5-toets : Als u de vorige scène aan het bekijken bent, springt het afspeelpunt naar dezelfde scène met live-tv. Als u dezelfde scène bekijkt met live-tv, wordt de functie Timeshift gestopt. Timeshift stoppen 1. 2. 3. 4. 5. 2. 3. 4. 2. 3. Druk in het scherm op Opgenomen tv-prog. om de titel te selecteren die u wilt bewerken. Druk op de toets TOOLS. Selecteer Bewerk en druk vervolgens op v.
Geavanceerde functie Een deel van een titel verwijderen (gedeeltelijk verwijderen) Volg stappen 1 tot 3 bij 'De opgenomen titel bewerken'. 1. Selecteer Deel wissen en druk vervolgens op v. AllShare Play tv-prog. | Deel wissen | Geen titel Deel 1 00:00:00 Deel 2 00:00:00 00:00:33 / 00:08:21 + Afspeelbesturing 2. 3. 4. 5. Start Einde Verwijderen Terug Scéne zoeken < Spring > Verplts " Enter Druk op v op het beginpunt.
DTV bekijken met het 3D-effect U kunt het 3D-effect ervaren met alle live tvprogramma's en opgenomen tv-programma's. Druk tijdens het bekijken van het tvprogramma of tijdens het afspelen van een opgenomen tv-programma op 2D3D op uw afstandsbediening. Het 3D-menu verschijnt. • 2D3D : Hiermee verandert u een 2D-beeld in een 3D-beeld. • Naast elkaar : Hiermee geeft u twee beelden naast elkaar weer. 2. 3. • Boven en onder : Hiermee geeft u twee beelden boven elkaar weer.
Netwerkservices U kunt gebruikmaken van verschillende netwerkservices, zoals Smart Hub of BD-LIVE, door het product aan te sluiten op het netwerk. Smart Hub in vogelvlucht 1 Lees de volgende instructies uit voordat u een netwerkservice gebruikt: 1. 2. Breng een verbinding tot stand tussen het product en het netwerk. (Zie pagina 20) Configureer de netwerkinstelling. (Zie pagina's 33-36) 1. Ga naar www.samsung.com. 3.
9 Webbrowser in een oogopslag 1 Samsung Apps : verschillende gratis of betaalde toepassingsservices downloaden. 08 http://www.google.com/ Netwerkservices 0 Mijn toepassingen : hier wordt uw persoonlijke galerij weergegeven van toepassingen die u kunt aanvullen, bewerken en verwijderen. De webbrowser gebruiken U kunt het internet gebruiken via de webbrowsertoepassing, die in standaard op het Smart Hub-scherm is geïnstalleerd. 1. 2.
Netwerkservices 2 Hulp bij navigatie : overzicht van de toetsen op de afstandsbediening die u kunt gebruiken voor de besturing in webbrowser. • GROEN (B) : om het configuratiescherm weer te geven. • GEEL (C) : om de cursor te wijzigen. • BLAUW (D) : om de PIP-functie te gebruiken. • Tools : om het venster Tools weer te geven. • Exit : De webbrowser sluiten.
Bijlage Opmerking i.v.m. compatibiliteit 02230D-BD-E8900-XN-NL.indd 65 Bijlage Nederlands 09 NIET ALLE discs zijn compatibel. • Afhankelijk van de hieronder beschreven beperkingen en de beperkingen die elders in deze Handleiding worden vermeld, met inbegrip van de onderdelen Disctype en Kenmerken in deze gebruikershandleiding, kunnen de volgende disctypen worden afgespeeld: vooraf opgenomen commerciële BD-ROM's, DVDVIDEO's en Audio-CD's (CD-DA); BD-RE/R's, DVD-RW/-R's en CD-RW/R's.
Bijlage Kopieerbeveiliging • Omdat AACS (Advanced Access Content System) werd goedgekeurd als inhoudbeschermingssysteem voor het Blu-ray Disc-formaat, vergelijkbaar met het gebruik van CSS (Content Scramble System) voor het DVD-formaat, worden bepaalde beperkingen opgelegd op het afspelen, het analoge uitvoersignaal etc. van de inhoud die door AACS wordt beschermd.
09 Bijlage INHOUD EN DIENSTEN VAN DERDEN WORDEN AANGEBODEN IN DE STAAT WAARIN ZE VERKEREN. SAMSUNG GEEFT GEEN GARANTIE MET BETREKKING TOT INHOUD OF SERVICES DIE OP DEZE WIJZE WORDEN AANGEBODEN, NOCH EXPLICIET, NOCH IMPLICIET, VOOR WELK DOELEINDE DAN OOK. SAMSUNG WIJST UITDRUKKELIJK ALLE GEÏMPLICEERDE GARANTIES VAN DE HAND, MET INBEGRIP VAN DOCH NIET BEPERKT TOT GARANTIES VAN VERHANDELBAARHEID OF GESCHIKTHEID VOOR EEN BEPAALD DOEL.
Bijlage -- DivX Certified® voor het afspelen van DivX® video van hoogstens HD 1080p, inclusief premium content. DivX®, DivX Certified® en de bijbehorende logo's zijn handelsmerken van Rovi Corporation of haar dochterondernemingen en worden gebruikt op grond van een licentie.
09 Bijlage -- Voor zover u, als eindgebruiker, enige informatie of originele auteurswerken verstrekt voor toevoeging aan Rovi-databases, verklaart en garandeert u dat u de enige eigenaar van deze werken bent en dat u verder hierbij alle auteursrechten hiervoor aan Rovi toewijst, met inbegrip van het recht om het auteursrecht voor dergelijke werken te registreren als onderdeel van de Rovi-database. -- DE ROVI-TECHNOLOGIE EN ELK ROVI-GEGEVENSITEM WORDT AAN U IN DE HUIDIGE VORM IN LICENTIE GEGEVEN.
Bijlage Extra informatie Opmerking 3D-instell. • U kunt tijdens het afspelen in 3D van sommige 3D-discs een film onderbreken door eenmaal op 5 te drukken. Het afspelen wordt onderbroken en de 3D-modus wordt uitgeschakeld. U kunt de geselecteerde 3D-optie tijdens het afspelen van een 3D-film wijzigen door eenmaal op de knop 5 te drukken. Het Blu-ray-menu verschijnt. Druk nogmaals op de knop 5 en selecteer 3D-instellingen in het Blu-ray-menu.
BD-Live-internet verbinding 09 Bijlage • Wat is een geldig certificaat? Wanneer het product BD-LIVE gebruikt om de discgegevens te verzenden en de server vraagt om de disc te certificeren, gebruikt de server de overgedragen gegevens om te controleren of de disc geldig is en zendt deze het certificaat terug naar het product. • De internetverbinding kan beperkt zijn wanneer u BD-LIVE-inhoud gebruikt. BD-gegevens verw.
Bijlage Resolutie in overeenstemming met de uitgangsmodus Afspelen van Blu-ray-discs/E-inhoud/Digitale inhoud Instellingen Type inhoud HDMI-modus E-inhoud/ Digitale inhoud VIDEO-modus VIDEO-modus 1080p 576i/480i - Max. resolutie van tvinvoer Max.
DTV-weergave DTV Smart Resolutie "Auto" Automatisch DTV Smart Resolutie "Uit" HDMI-modus 1080p Resolutie van uitgezonden beelden Max. resolutie van Tv-invoer 1080p 1080p 720p 720p 1080i 576p/480p 576i/480i VIDEO-modus 576i/480i HDMI/niet aangesloten VIDEO-modus - 576i/480i - 576i/480i - 1080i 576i/480i 576i/480i 576p/480p 576i/480i 576i/480i - 576i/480i - Bijlage BD Wise HDMI/aangesloten 09 Uitvoer Resolutie 576i/480i 576i/480i ||OPMERKING | \\ Geavanc.
Bijlage Selectie van digitale uitvoer Instellingen Aansluiting PCM Dolby Digital Dolby Digital Plus Audiostream op Blu-ray- Dolby TrueHD disc DTS DTS-HD High Resolution Audio DTS-HD Master Audio PCM Audiostream op DVD Dolby Digital DTS Dolby Digital Audiostream van uitzending Dolby Digital Plus MPEG1 Layer 2 HE-AAC PCM AVontvanger met HDMIondersteuning Maximaal 7.1 PCMkanalen Maximaal 7.1 PCMkanalen Maximaal 7.1 PCMkanalen Maximaal 7.1 PCMkanalen Maximaal 6.1 PCMkanalen Maximaal 7.
Definitie voor Blu-ray-disc Alle AVontvanger met HDMIondersteuning Optisch De hoofdaudiostream en BONUSVIEW-audiostream worden samen tot PCMgeluid gedecodeerd met toevoeging van navigatiegeluidseffecten. Bitstream (zonder omzetting) AVontvanger met HDMIondersteuning Optisch Voert alleen de hoofdaudiostream uit, zodat de AV-ontvanger de audiostream kan decoderen. Het BONUSVIEW-geluid en de navigatiegeluidseffecten worden niet weergegeven.
Bijlage Problemen oplossen Probeer de volgende oplossingen voordat u contact met ons opneemt. PROBLEEM OPLOSSING De afstandsbediening werkt niet. • Controleer de batterijen in de afstandsbediening. Mogelijk dient u deze te vervangen. • Gebruik de afstandsbediening op een afstand van niet meer dan 6,1meter. • Verwijder de batterijen en houd een of meerdere toetsen gedurende een paar minuten ingedrukt, zodat de microprocessor in de afstandsbediening gereset kan worden.
PROBLEEM OPLOSSING Het beeld is vervormd of bevat ruis • Zorg dat de disc schoon is en zonder krassen. • Maak de disc schoon. Er is geen HDMI-uitvoer. • Controleer de aansluiting tussen de tv en de HDMI-aansluiting van het product. • Controleer of uw tv een HDMI-invoerresolutie van 480p, 720p, 1080i of 1080p ondersteunt. Abnormaal HDMI-uitvoerscherm. • Als er sneeuw te zien is op het scherm, betekent dit dat de tv geen HDCP (High-bandwidth Digital Content Protection) ondersteunt.
Bijlage PROBLEEM BD-LIVE Ik kan geen verbinding maken met de BDLIVE-server. OPLOSSING • Controleer of de netwerkverbinding actief is met behulp van het menu Netwerkstatus. (Zie pagina 27) • Controleer of het USB-geheugen is aangesloten op het product. • Het geheugenapparaat moet ten minste 1GB vrije ruimte bieden om de BDLIVE-service te kunnen ondersteunen. U kunt in Management BD-gegevens de beschikbare ruimte controleren.
Specificaties Video-uitgang Audio-uitgang Netwerk HDD-capaciteit Composietvideo (analoog) Analoog Digitaal Ethernet Draadloos LAN Beveiliging WPS(PBC) BD-E8300 BD-E8500 BD-E8900 Bijlage HDMI 3,2 kg 430 (B) X 300 (D) X 59 (H) mm +5°C tot +35°C 10 % tot 75 % Resolutie : 1080p, 1080i, 720p, 576p/480p PCM, Bitstream RCA-aansluiting, 1,0Vp-p (75ohm belasting) Resolutie : 576i/480i RCA-aansluiting 2 kanalen, (2Vrms ± 10%) TOS-Link Optisch 100BASE - TX Terminal Ingebouwd WEP(OPEN/SHARED) WPA-PSK(TKIP/AES) W
NEDERLAND BELGIË Dit Samsung-product is gegarandeerd tegen fabricage- en/of materiaalfouten voor een periode van twee jaar (24 maanden) gerekend gerekend vanaf de oorspronkelijke aankoopdatum, tenzij in de nationale of Europese wet- of regelgeving een andere garantieperiode is vastgesteld. Indien aanspraak wordt gemaakt op een reparatie onder garantie, dient u het product te retourneren aan de winkelier waar u het product gekocht heeft.
LUXEMBOURG BELGIQUE Cet appareil Samsung est couvert par une garantie de 2 ans (24mois) - à moins qu’une autre période de garantie ne soit fixée dans la législation ou réglementation nationale ou européenne - à partir de la date d’achat, pour des défauts de fabrication et/ou matériaux utilisés. Pour revendiquer le droit de réparation sous garantie, vous devez retourner l’appareil chez le revendeur où vous l’avez acheté.
Contact Samsung wereldwijd Wanneer u suggesties of vragen heeft met betrekking tot Samsung producten, gelieve contact op te nemen met de consumenten dienst van Samsung. Area ALBANIA AUSTRIA Contact Centre 42 27 5755 0810 - SAMSUNG (7267864, € 0.