User Manual
Ğ
If you have a static IP address or
the Automatic procedure does not
work, you'll need to set the Network
Settings values manually.
Follow Steps 1 and 2 in Wired -
Automatic, and then follow these
steps:
Select . The player
searches for a network, and then
displays the connection failed
message.
On the bottom of the screen,
select , and then press
the
v
button.
The IP Settings screen appears.
Select the IP Setting field, and
then press the
v
button.
Select in the IP
Setting field, and then press the
v
button.
Select a value to enter (,
for example), and then press the
v
button.
Use the number keypad on your
remote control to enter the numbers
for the value. Use the ◀▶ buttons
on the remote control to move from
entry field to entry field within a
value. When done with one value,
press the
v
button.
Press the ▲ or ▼ button to move to
another value, and then enter the
numbers for that value following
the instructions in Step 5.
Repeat Steps 5 and 6 until you
have filled in all values.
✎
You can get the Network values
from your Internet provider.
When finished entering all the
values, press the
buttons. The player verifies the
network connection and then
connects to the network.
You can setup a wireless network
connection in four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS(PIN)
When you configure the wireless
network connection, any wireless
network devices currently connected
through the player or, if applicable,
the player's current wired connection,
will be disconnected.
Ğ
In the Home screen, select ,
and then press the
v
button.
Select , and then press
the
v
button.
Select , and then
press the
v
button.
Select in the Network
Settings screen, and then press
the
v
button. The player
searches for and then displays a
list of the available networks.
m
"
'
Select the desired network, and
then press the
v
button.
On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote
control. Enter letters by selecting
a letter with an arrow button, and
then pressing
v
button.
When finished, select and then
press the
v
button. The player
verifies the network connection and
then connects to the network.
When verification is complete,
select , and then press the
v
button.
✎
You should be able to find the
Security Code or Pass Phrase on
one of the set up screens you used
to set up your router or modem.
Ğ
If you have a static IP address or
the Automatic procedure does not
work, you'll need to set the Network
Settings values manually.
Follow the directions in Wireless -
Automatic through Step 5.
The player searches for a network,
and then displays the connection
failed message.
On the bottom of the screen,
select , and then press
the
v
button.
The IP Settings screen appears.
Select the IP Setting field, and
then press the
v
button.
Select in the IP
Setting field, and then press the
v
button.
Select a value to enter (,
for example), and then press
v
button. Use the number keypad
on your remote control to enter
the numbers for the value. Use
the ◀▶ buttons on the remote
control to move from entry field
to entry field within a value.
When done with one value, press
the
v
button.
Press the ▲ or ▼ button to move to
another value, and then enter the
numbers for that value following
the instructions in Step 6.
Repeat Steps 6 and 7 until you
have filled in all values.
✎
You can get the Network values
from your Internet provider.
When finished, and then press
the buttons. The
Security Screen appears.