Use and Care Manual
Go to Step 6 of The Setup
Procedure on the previous page.
✎
The Home screen will not appear if
■
you do not configure the player's
settings during Setup, except as
noted below.
If you press the
■
button
during network setup, you can
access the Home screen even if the
network setup is not completed yet.
If you do not complete network set
■
up during the Initial Setup, you can
do it later. See page 14.
When you return to the Home
■
screen, the full screen mode is
cancelled automatically.
If you want to display the Setup
■
screen again to make changes, press
the
^
button on the front panel of
the player for more than 5 seconds
with no disc inserted. This resets the
player to its default settings.
After the Setup process is complete, you
■
can operate the HDMI-CEC function.
If you want to use an Anynet+
■
(HDMI-CEC) function to aid in the
initial set up process, please follow
the instructions below.
1) Connect the player to an
Anynet+(HDMI-CEC) compliant
Samsung TV using an HDMI Cable.
2)
Set the Anynet+(HDMI-CEC) feature
to On in both the TV and the player.
3)
Set the TV to the Setup Procedure.
If you leave the player in the stop
■
mode for more than 5 minutes
without using it, a screen saver will
appear on your TV. If the player is
left in the screen saver mode for
more than 25 minutes, the power
will automatically turn off.
Menu Navigation
SCREEN
VIEW A-B
FULLBONUS REPEATREPEAT
1
2
4
3
1
Button : Press to move to
the Home menu.
2
Button : Return to the
previous menu.
3
v
Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
4
Button : Press to exit the
current menu.
●
No Disc
2
3
6
5
7
1
4
8
1
Access and play VIDEOS.
2
Access and play MUSIC.
3
Access and change SETTINGS.
4
Change the Source Device.
5
Access and view PHOTOS.
6
Play a DISC.
7
Access and use APPLICATIONS.
8
Access MORE APPLICATIONS.
✎
The Videos, Photos, and Music
■
options require that you have an
appropriate disc in the player or a USB
flash device attached to the player.
Accessing the Settings Menu
To access the Settings menu and sub-
menus, follow these steps:
Press the
POWER button.
The Home Menu appears.
Press the ▲▼◀▶ buttons to
select Settings, and then press the
v
button.
Press the ▲▼ buttons to select
the desired submenu, and then
press the
v
button.
Press the ▲▼ buttons to select
the desired item, and then press
the
v
button.
Press the EXIT button to exit the
menu.
✎
The access steps may differ depending
■
on the menu you selected. The OSD
(On Screen Display) may change in
this player after you upgrade the
software version.
Picture Settings
You can configure various display
options such as the TV Aspect Ratio,
Resolution, etc.
Depending on the type of television
you have, you may want to adjust the
screen size setting.
Wireless Network
The Blu-ray player automatically
searches for and then lists all wireless
networks that are within range.
a d m "
Select a network, and then press the
v
button. The keyboard appears.
a d m "
Enter security key. 0 / 64
Caps 1 2 3 4 5 6 7 8 9 0
Clear
q w e r t y u i o p
^ *
123#& a s d f g h j k l ~ @ !
z
x c v
b
n m , . ? - Cancel
◀ ▶
"
Select
'
Return
Security Key
If your network has a password, use
the keyboard to enter it. Press the
number buttons on your remote to
enter numbers. Use the keyboard to
enter letters. When finished, use the
▲▼◀▶ buttons to select Done, and
then press the
v
button.
If you have no password, go to Step 4.
After the player verifies the
network, press the
v
button.