User manual
2.
The player searches for a network,
and then displays the connection
failed message.
3.
On the bottom of the screen, select
IP Settings, and then press the
v
button.
The IP Settings screen appears.
4.
Select the IP Setting field, and then
press the
v
button.
5.
Select Enter manually in the IP
Setting field, and then press the
v
button.
6.
Select a value to enter (IP Address,
for example), and then press
v
button. Use the number keypad
on your remote control to enter the
numbers for the value. Use the ◄►
buttons on the remote control to
move from entry field to entry field
within a value. When done with one
value, press the
v
button.
7.
Press the ▲ or ▼ button to move
to another value, and then enter the
numbers for that value following the
instructions in Step 6.
8.
Repeat Steps 6 and 7 until you have
filled in all values.
✎
NOTES
`
You can get the Network values from your
Internet provider.
9.
When finished, and then press the
RETURN or EXIT buttons. The
Security Screen appears.
10.
On the Security screen, enter your
network's Security Code or Pass
Phrase. Enter numbers directly using
the number buttons on your remote
control. Enter letters by selecting a
letter with the ▲▼◄► buttons, and
then pressing the
v
button.
11.
When finished, select Done at the
right of the screen, and then press
the
v
button.
The player verifies the network
connection and then connects to
the network.
12.
After the player verifies the network,
select OK, and then press the
v
button.
Ğ
WPS(PBC)
1.
In the Home screen, select Settings,
and then press the
v
button.
2.
Select Network, and then press the
v
button.
3.
Select Network Settings, and then
press the
v
button.
4.
Select Wireless in the Network
Settings screen, and then press the
v
button.
5.
Press the ▲▼ button on your
remote, and then press the ◄►
button to select the WPS(PBC).
6.
Press the
v
button on your
remote. The "Press the PBC button"
message appears.
7.
Press the WPS(PBC) button on
your router within two minutes. Your
player automatically acquires all the
network settings values it needs and
connects to your network.
The Network Status screen appears.
The player connects to the network
after the network connection is
verified.
Ğ
WPS(PIN)
Before you begin, open the router's
setup menu on your PC and access the
screen with the WPS PIN entry field.
1.
In the Home screen, select Settings,
and then press the
v
button.
2.
Select Network, and then press the
v
button.
3.
Select Network Settings, and then
press the
v
button.
4.
Select Wireless in the Network
Settings screen, and then press the
v
button.
The player searches for and then
displays a list of the available
networks.
5.
Select the desired network, and then
press the ► button.
6.
Select the WPS(PIN), and then
press the
v
button. The PIN pop-up
appears.
7.
Enter the PIN into the WPS PIN entry
field in the router's Set Up screen
and then save the the screen.
✎
NOTES
`
Contact the manufacturer of the router for
instructions explaining how to access the
route's Set Up screens or refer to the router's
user's manual.
`
For WPS connection, set your wireless router’s
security encryption to AES. Setting to WEP
security encryption does not support WPS
connection.
Network Test
Use this menu item to check whether
your network connection is working or
not.
Network Status
Use to check whether a connection to
a network and the Internet has been
established
.
Wi-Fi Direct
The Wi-Fi Direct function allows you
to connect Wi-Fi Direct devices to the
player and each other using a peer-to-
peer network, without a wireless router.
✎
NOTES
`
Some Wi-Fi Direct devices may not support the
DLNA function if connected via Wi-Fi Direct. If
this is the case, it is advisable to change the
network connection method between devices.
`
Bluetooth transmissions can interfere with the
Wi-Fi Direct signal. Before you use the Wi-
Fi Direct function, we strongly recommend
that you turn off the Bluetooth function of any
active mobile device.
14