User manual

NOTES
✎
Contact the manufacturer of the router for
`
instructions explaining how to access the
route's Set Up screens or refer to the router's
user's manual.
For WPS connection, set your wireless router’s
`
security encryption to AES. Setting to WEP
security encryption does not support WPS
connection.
Network Test
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection to a
network and the Internet has been established.
Wi-Fi Direct
The Wi-Fi Direct function allows you to
connect Wi-Fi Direct devices to the player
and each other using a peer-to-peer network,
without a wireless router.
NOTES
✎
Some Wi-Fi Direct devices may not support the
`
DLNA function if connected via Wi-Fi Direct. If
this is the case, it is advisable to change the
network connection method between devices.
Bluetooth transmissions can interfere with the
`
Wi-Fi Direct signal. Before you use the Wi-Fi
Direct function, we strongly recommend that
you turn off the Bluetooth function of any active
mobile device.
Turn on the Wi-Fi direct device and 1
.
activate its Wi-Fi Direct function.
In the Home screen, select 2
. Settings, and
then press the
v
button.
Select 3
. Network, and then press the
v
button.
Select 4
. Wi-Fi Direct, and then press the
v
button.
The Wi-Fi Direct devices that you can
connect appear.
You have three ways to complete the Wi-5
.
Fi connection:
Through the Wi-Fi device.•
Through the player using PBC.•
Through the player using a PIN.•
Each is covered below.
Through the Wi-Fi Device
On the Wi-Fi device, follow the procedure 1.
on the device for connecting to another
Wi-Fi Direct device. See the device's user
manual for instructions.
When you have completed the procedure, 2
.
you should see a pop-up on your TV
screen saying that a device that supports
Wi-Fi Direct has requested to connect.
Select OK, and then press the
v
button
to accept.
The Connecting pop-up appears, 3
.
followed by the Connected pop-up. When
it closes, you should see the device listed
on the Wi-Fi Direct screen as connected.
Through the Player Using PBC
Select the Wi-Fi Direct device you want 1.
to connect to this player, and then press
the
v
button. The PBC/PIN pop up
appears.
Select 2
. PBC, and then press the
v
button. The PBC pop-up appears.
Press the PBC button on the Wi-Fi Direct 3
.
device within 2 minutes.
The Connecting pop-up appears, 4.
followed by the Connected pop-up. When
it closes, you should see the device listed
on the Wi-Fi Direct screen as connected.
Through the Player Using a PIN
Select the Wi-Fi Direct device you want 1.
to connect to this player, and then press
the
v
button. The PBC/PIN pop up
appears.
Select 2
. PIN, and then press the
v
button. The PIN pop-up appears.
Note the PIN code in the pop-up, and 3
.
then enter it into the appropriate field
in the Wi-Fi Direct device you want to
connect.
The Connecting pop-up appears, 4
.
followed by the Connected pop-up. When
it closes, you should see the device listed
on the Wi-Fi Direct screen as connected.
NOTES
✎
The current wired or wireless network
`
connection will be disconnected when you use
the Wi-Fi Direct function.
Text files, such as files with a .TXT or .DOC
`
extension, will not display when you are using
the Wi-Fi Direct function.
Screen Mirroring
The Screen Mirroring function lets you view
the screen of your smart phone or android
tablet on the TV you have connected to the
Blu-ray player.
In the Home menu, press the ▲▼◄► 1
.
buttons to select Screen Mirroring, and
then press the
v
button. The Screen
Mirroring pop-up appears.
Launch 2
. DLNA Cast on your device.
On your device, find the name of the Blu-3.
ray player in the list of available devices
and then select it.
The TV will display a PIN. Enter the PIN 4
.
into your device.
The TV displays a connecting message (for 5
.
example, Connecting to Android_92gb...)
and then displays the connected
message.
In a few moments, the screen of your 6
.
device appears on the TV screen.
To stop Screen Mirroring, press the 7
. EXIT
or RETURN button on the remote control,
or disable Screen Mirroring function of
your smart phone.
NOTES
✎
You can connect to a device that supports
`
DLNA Cast. Note that connecting to such a
device may not be fully supported depending
on the manufacturer. For further information
on mobile connection support, refer to the
manufacturer’s web site.
When you are using the Screen Mirroring
`
function, video stuttering or audio dropouts
may occur, depending on your environment.
Bluetooth transmissions can interfere with
`
the Screen Mirroring signal. Before using
the Screen Mirroring function, we strongly
recommend that you turn off the Bluetooth
function on your smart phone or smart device
(tablet, etc.).
Device Name
Device Name function allows you to change
player's name by selecting from device name
list.
15