User manual
✎
NOTES
`
You can get the Network values from your
Internet provider.
8.
When finished entering all the values,
press the RETURN or EXIT buttons.
The player verifies the network
connection and then connects to
the network.
Wireless Network
You can setup a wireless network
connection in four ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
- WPS(PIN)
When you configure the wireless network
connection, any wireless network devices
currently connected through the player
or, if applicable, the player's current wired
connection, will be disconnected.
Ğ
Wireless - Automatic
1.
In the Home screen, select Settings,
and then press the
v
button.
2.
Select Network, and then press the
v
button.
3.
Select Network Settings, and then
press the
v
button.
4.
Select Wireless in the Network
Settings screen, and then press the
v
button. The player searches
for and then displays a list of the
available networks.
m
Move
"
Select
'
Return
Network Settings
Select your network type.
Network type Wireless
Wireless network
Add Network
You can connect your Blu-ray
player to the internet. Please
select which wireless network
to use.
WPS(PBC) Search
5.
Select the desired network, and then
press the
v
button.
6.
On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote
control. Enter letters by selecting a
letter with an arrow button, and then
pressing
v
button.
7.
When done, select Done and then
press the
v
button. The player
verifies the network connection and
then connects to the network.
8.
When verification is complete, select
OK, and then press the
v
button.
✎
NOTES
`
You should be able to find the Security Code or
Pass Phrase on one of the set up screens you
used to set up your router or modem.
Ğ
Wireless - Manual
If you have a static IP address or the
Automatic procedure does not work,
you'll need to set the Network Settings
values manually.
1.
Follow the directions in Wireless -
Automatic through Step 5.
2.
The player searches for a network,
and then displays the connection
failed message.
3.
On the bottom of the screen, select
IP Settings, and then press the
v
button.
The IP Settings screen appears.
4.
Select the IP Setting field, and then
press the
v
button.
5.
Select Enter manually in the IP
Setting field, and then press the
v
button.
6.
Select a value to enter (IP Address,
for example), and then press
v
button. Use the number keypad
on your remote control to enter the
numbers for the value. Use the ◄►
buttons on the remote control to
move from entry field to entry field
within a value. When done with one
value, press the
v
button.
7.
Press the ▲ or ▼ button to move
to another value, and then enter the
numbers for that value following the
instructions in Step 6.
8.
Repeat Steps 6 and 7 until you have
filled in all values.
✎
NOTES
`
You can get the Network values from your
Internet provider.
9.
When finished, and then press the
RETURN or EXIT buttons. The
Security Screen appears.
10.
On the Security screen, enter your
network's Security Code or Pass
Phrase. Enter numbers directly using
the number buttons on your remote
control. Enter letters by selecting a
letter with the ▲▼◄► buttons, and
then pressing the
v
button.
11.
When finished, select Done at the
right of the screen, and then press
the
v
button.
The player verifies the network
connection and then connects to
the network.
12.
After the player verifies the network,
select OK, and then press the
v
button.
Ğ
WPS(PBC)
1.
In the Home screen, select Settings,
and then press the
v
button.
2.
Select Network, and then press the
v
button.
3.
Select Network Settings, and then
press the
v
button.
4.
Select Wireless in the Network
Settings screen, and then press the
v
button.
5.
Press the ▲▼ button on your
remote, and then press the ◄►
button to select the WPS(PBC).
6.
Press the
v
button on your
remote. The "Press the PBC button"
message appears.
14