User manual
1.
Turn on the Wi-Fi direct device and
activate its Wi-Fi Direct function.
2.
In the Home screen, select Settings,
and then press the
v
button.
3.
Select Network, and then press the
v
button.
4.
Select Wi-Fi Direct, and then press
the
v
button.
The Wi-Fi Direct devices that you
can connect appear.
5.
You have three ways to complete
the Wi-Fi connection:
•
Through the Wi-Fi device.
•
Through the player using PBC.
•
Through the player using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the
procedure on the device for
connecting to another Wi-Fi Direct
device. See the device's user
manual for instructions.
2.
When you have completed the
procedure, you should see a pop-
up on your TV screen saying that
a device that supports Wi-Fi Direct
has requested to connect. Select
OK, and then press the
v
button
to accept.
3.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should see
the device listed on the Wi-Fi Direct
screen as connected.
Through the Player Using PBC
1.
Select the Wi-Fi Direct device you
want to connect to this player, and
then press the
v
button. The PBC/
PIN pop up appears.
2.
Select PBC, and then press the
v
button. The PBC pop-up appears.
3.
Press the PBC button on the Wi-Fi
Direct device within 2 minutes.
4.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should see
the device listed on the Wi-Fi Direct
screen as connected.
Through the Player Using a PIN
1.
Select the Wi-Fi Direct device you
want to connect to this player, and
then press the
v
button. The PBC/
PIN pop up appears.
2.
Select PIN, and then press the
v
button. The PIN pop-up appears.
3.
Note the PIN code in the pop-up,
and then enter it into the appropriate
field in the Wi-Fi Direct device you
want to connect.
4.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should see
the device listed on the Wi-Fi Direct
screen as connected.
7.
Press the WPS(PBC) button on
your router within two minutes. Your
player automatically acquires all the
network settings values it needs and
connects to your network.
The Network Status screen appears.
The player connects to the network
after the network connection is
verified.
Ğ
WPS(PIN)
Before you begin, open the router's
setup menu on your PC and access the
screen with the WPS PIN entry field.
1.
In the Home screen, select Settings,
and then press the
v
button.
2.
Select Network, and then press the
v
button.
3.
Select Network Settings, and then
press the
v
button.
4.
Select Wireless in the Network
Settings screen, and then press the
v
button.
The player searches for and then
displays a list of the available
networks.
5.
Select the desired network, and then
press the ► button.
6.
Select the WPS(PIN), and then
press the
v
button. The PIN pop-up
appears.
7.
Enter the PIN into the WPS PIN entry
field in the router's Set Up screen
and then save the the screen.
✎
NOTES
`
Contact the manufacturer of the router for
instructions explaining how to access the
route's Set Up screens or refer to the router's
user's manual.
`
For WPS connection, set your wireless router’s
security encryption to AES. Setting to WEP
security encryption does not support WPS
connection.
Network Test
Use this menu item to check whether
your network connection is working or
not.
Network Status
Use to check whether a connection to
a network and the Internet has been
established
.
Wi-Fi Direct
The Wi-Fi Direct function allows you
to connect Wi-Fi Direct devices to the
player and each other using a peer-to-
peer network, without a wireless router.
✎
NOTES
`
Some Wi-Fi Direct devices may not support the
DLNA function if connected via Wi-Fi Direct. If
this is the case, it is advisable to change the
network connection method between devices.
`
Bluetooth transmissions can interfere with the
Wi-Fi Direct signal. Before you use the Wi-
Fi Direct function, we strongly recommend
that you turn off the Bluetooth function of any
active mobile device.
15