User Manual
Network Settings
When you connect this player to a
network, you can use network based
applications and functions such as BD-
LIVE (see page 16), Netflix, Pandora,
and YouTube (see pages 23~25). You
can also use the network connection
to upgrade the player's software (see
page 18). Instructions for configuring
the network connection start below
.
Before you begin, contact your ISP to find
out if your IP address is static or dynamic.
If it is dynamic, and you have a wired or
wireless network, we recommend using
the Automatic configuration procedures
described below.
If you are connecting to a wired
network, connect the player to your
router using a LAN cable before you
start the configuration procedure.
If you are connecting to a wireless
network, disconnect any wired
network connections before you begin.
To begin configuring your network
connection, follow the steps
beginning below.
Ğ
In the Home screen, select ,
and then press the
v
button.
Use the number keypad on your
remote control to enter the
numbers for the parameter. Use
the ◀▶ buttons on the remote
control to move from entry field to
entry field within a parameter.
When done with one
parameter
,
press the
v
button.
Press the ▲ or ▼ button to move to
another
parameter
, and then enter
the numbers for that
parameter
following the instructions in Step 5.
Repeat Steps 5 and 6 until you
have filled in all
parameter
s.
✎
■
You can get the Network parameters
from your Internet provider.
When finished entering all the
parameter
s, press the or
button. The player verifies
the network connection, and then
connects to the network.
You can setup a wireless network
connection in four ways:
-
Wireless Automatic
-
Wireless Manual
-
WPS(PBC)
-
WPS(PIN)
When you configure the wireless
network connection, any wireless
network devices currently connected
through the player or, if applicable,
the player's current wired connection,
will be disconnected.
Ğ
In the Home screen, select
, and then press the
v
button.
Select , and then press
the
v
button.
Select , and then
press the
v
button.
Select in the Network
Settings screen, and then press
the
v
button. The player
searches for and then displays a
list of the available networks.
m "
'
Select the desired network, and
then press the
v
button.
On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote
control. Enter letters by selecting
a letter with an arrow button, and
then pressing
v
button.
When finished, select and then
press the
v
button. The player
verifies the network connection and
then connects to the network.
Select , and then press
the
v
button.
Select , and then
press the
v
button.
Select in the Network
Settings screen, and then press
the
v
button.
Select the button, and then
press the
v
button. The product
detects the wired connection,
verifies the network connection,
and then connects to the network.
Ğ
If you have a static IP address or
the Automatic procedure does not
work, you'll need to set the Network
Settings values manually.
Follow Steps 1 and 2 in Wired -
Automatic, and then follow these
steps:
Select . The player
searches for a network, and then
displays the connection failed
message.
On the bottom of the screen,
select , and then press
the
v
button.
The IP Settings screen appears.
Select the IP Setting field, and
then press the
v
button.
Select in the IP
Setting field, and then press the
v
button.
Select a parameter to enter (
, for example), and then
press the
v
button.