User Manual
The Wi-Fi Direct function allows you
to connect Wi-Fi Direct devices to the
player and each other using a peer-to-
peer network, without a wireless router.
✎
■
Some Wi-Fi Direct devices may
not support the DLNA function if
connected via Wi-Fi Direct. If this is
the case, we recommend that you
change the network connection
method you used to connect the
devices.
■
Bluetooth transmissions can
interfere with the Wi-Fi Direct
signal. Before you use the Wi-
Fi Direct function, we strongly
recommend that you turn off the
Bluetooth function of any active
mobile device.
Turn on the Wi-Fi direct device and
activate its Wi-Fi Direct function.
In the Home screen, select
, and then press the
v
button.
Select , and then press
the
v
button.
Select , and then press
the
v
button.
The Wi-Fi Direct devices that you
can connect to the player appear.
You have three ways to complete
the Wi-Fi connection:
●
Through the Wi-Fi device.
●
Through the player using PBC.
●
Through the player using a PIN.
Each is covered below.
On the Wi-Fi device, follow the
procedure on the device for
connecting to another Wi-Fi
Direct device. See the device's
user manual for instructions.
When you have completed the
procedure, you should see a pop-
up on your TV screen saying that a
device that supports Wi-Fi Direct has
requested to connect. Select , and
then press the
v
button to accept.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should
see the device listed on the Wi-Fi
Direct screen as connected
.
Select the Wi-Fi Direct device you
want to connect to this player,
and then press the
v
button.
The PBC/PIN pop up appears.
Select , and then press the
v
button. The PBC pop-up appears.
Press the PBC button on the Wi-Fi
Direct device within 2 minutes.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should
see the device listed on the Wi-Fi
Direct screen as connected
.
Select the Wi-Fi Direct device you
want to connect to this player,
and then press the
v
button.
The PBC/PIN pop up appears.
Select , and then press the
v
button. The PIN pop-up appears.
Note the PIN code in the pop-
up, and then enter it into the
appropriate field in the Wi-Fi Direct
device you want to connect.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should
see the device listed on the Wi-Fi
Direct screen as connected.
✎
■
The current wired or wireless
network connection will be
disconnected when you use the
Wi-Fi Direct function.
■
Text files, such as files with a .TXT
or .DOC extension, do not display
when you are using the Wi-Fi Direct
function.
The Device Name function allows
you to change the player's name by
selecting from a device name list.
Set to allow or prohibit an Internet
connection when you use the BD-
LIVE service.
●
: The Internet connection
is allowed for all BD-LIVE contents.
●
: The Internet
connection is allowed only for BD-
LIVE contents containing a valid
certificate.
●
: No Internet connection is
allowed for any BD-LIVE content
.
✎
■
When the player uses BD-LIVE to
send the disc data and a request
to the server to certify the disc,
the server uses the transmitted
data to check if the disc is valid
and sends the certificate back to
the player.
■
The Internet connection may be
restricted while you are using BD-
LIVE contents.
Once the player is connected to
the network, you can enjoy various
movie-related service content using a
BD-LIVE compliant disc.
Attach a USB memory stick to
the USB jack on the front of
the player, and then check its
remaining memory. The memory
device must have at least 1GB of
free space to accommodate the
BD-LIVE services.
Insert a Blu-ray Disc that supports
BD-LIVE.
Select an item from various BD-
LIVE service contents provided by
the disc manufacturer.
✎
■
The way you use BD-LIVE and
the provided contents may
differ, depending on the disc
manufacturer.