BD-P2550 Blu-ray Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
key features of your new Blu-ray Disc Player Player Features Supports a Variety of Disc Types Supports Blu-ray (BD-ROM, BD-RE, BD-R), DVD Video, DVD-RW/-R (V mode and finalized only) discs and Audio CD. HDMI (High Definition Multimedia Interface) HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV. Blu-ray Disc Features Blu-ray Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD.
Menu graphics Support full color resolution graphics and animation, thereby greatly surpassing the capabilities of DVD-Video. Unlike DVD, Menus can be accessed during video playback. Menu sounds When you highlight or select a menu option on a disc, sounds can be heard such as button clicks or a voice-over explaining the highlighted menu choice. Multi-page/PopUp Menus Unlike the DVD-Video, playback is not interrupted each time a new menu screen is accessed.
safety information Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within CAUTION: TO REDUCE THE RISK OF ELECTRIC Triangle Is a warning sign alerting you of SHOCK, DO NOT REMOVE COVER (OR BACK) NO dangerous voltage Inside the product USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Note: • This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. • This Blu-ray Disc Player is designed and manufactured to respond to the Region Management Information. If the Region number of a BD/DVD disc does not correspond to the Region number of this Blu-ray Disc Player, the Blu-ray Disc Player cannot play the disc. ● safety information PRECAUTIONS Important Safety Instructions Read these operating instructions carefully before using the unit.
safety information Handling Cautions ~ Before connecting other components to this Blu-ray Disc Player, be sure to turn them all off. ~ Do not move the Blu-ray Disc Player while a disc is being played as the disc may be scratched or broken, or the Blu-ray Disc Player’s internal parts may be damaged. ~ Do not put a flower vase filled with water or any small metal objects on the Blu-ray Disc Player. ~ Be careful not to put your hand into the disc tray.
contents 3 What’s included safety information 4 5 Warning Precautions 2 4 9 14 17 20 getting started description remote control connections 9 Before Using the User’s Manual 10 Disc Type and Characteristics 13 Disc Storage & Management 14 Front Panel 15 Front Panel Display 16 Rear Panel 17 18 18 19 20 29 Tour of the Remote Control Setting the Remote Control Regarding the Battery Controllable TV Codes Connecting to a TV with an HDMI Cable (BEST QUALITY) HDMI Auto Detection Function
contents audio setup 36 39 42 44 46 display setup HDMI setup 39 Setting up the display Options 42 Setting up the HDMI setup options parental setup 44 Setting up the Parental Lock network setup 46 TCP/IP Setting 47 Proxy Setting 47 NTP Server Setting (Used to Retrieve Time Information from NTP Server) 48 Mac Address 48 BD-LIVE Internet Connection 49 System Device Management persistent storage management 49 50 53 system upgrade watching a movie listening to music 63 troubleshooting
getting started Before Using the User’s Manual Make sure to check the following terms before using the user’s manual. Icon h g f Z C V B M ● Getting Started Icons that will be used in this manual Term Definition BD-ROM This involves a function available on a BD-ROM. BD-RE This involves a function available on the BD-RE. BD-R This involves a function available on the BD-R.
getting started Disc Type and Characteristics Disc types that can be played Disc Types BD-ROM BD-RE/BD-R DVD-VIDEO Disc Logo Recorded content AUDIO + VIDEO AUDIO + VIDEO Disc Shape Max. Playing minute Playing time depends on the Title Single sided Single sided(5 inches) 240 Double sided(5 inches) 480 Single sided(3 1/2 inches) 80 Double sided(3 1/2 inches) 160 DVD-RW (V mode and finalized only) AUDIO + VIDEO 5 inches (4.
[Note] ~ Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either “No disc.” or “Please check the regional code of the disc.” will be displayed. ~ If a DVD-R/-RW disc has not been recorded properly in DVD video format, it will not be playable. ~ The unit cannot play CD-RW/CD-R and DVD-RW/-R recorded content such as divx, avi, mpg, mov, wma, mp3,digital photo view(JPEG) file.
getting started Disc Types ❖ BD-ROM Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM may contain any form of data, most BD-ROM discs will contain movies in High Definition format, for playback on Blu-ray Disc Player's. This unit can play back pre-recorded commercial BD-ROM discs. ❖ BD-RE/BD-R Blu-ray Disc Rewritable/Blu-ray Disc Recordable. BD-RE/BD-R is the ideal format for making backups, or recording personal video.
~ “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation. M` Some AVCHD format discs may not play, depending on the recording condition. AVCHD format discs need to be finalized. ` “x.v.Color” offers a wider color range than normal DVD camcorder discs. Disc Storage & Management ● Getting Started Disc Handling ❖ Disc Shape ~ Use discs with regular shapes.
description Front Panel 1 2 3 8 7 6 POWER BUTTON Turns the Blu-ray Disc Player on and off. DISC TRAY Opens to accept a disc. PLAY/PAUSE BUTTON Plays a disc or pauses playback. SEARCH/SKIP BUTTONS Goes to the next title/chapter/track or goes back to the previous title/chapter/track. STOP BUTTON Stops disc playback. DISPLAY Displays the playing status, time, etc. Remote Control Sensor Detects signals from the remote control.
Front Panel Display ● Description Playback-related, Open/Close indicator Lights when playback-related and open/close buttons are selected. In Disc Indicator Lights when a disc is in the tray. Disc Type indicators Lights to indicate the disc type in the tray. USB Indicator Lights to indicate when USB is connected. HDMI Indicator Lights to indicate when HDMI is connected. Resolution Indicator Indicates the 1080p, 1080i or 720p resolution when HDMI or Component is connected.
description Rear Panel 2 3 4 5 1 6 1 7 8 A Fan The fan always revolves when the power is on. Ensure a minimum of 4 inches of clear space on all sides of the fan when installing the product. M` USB HOST It can be used as local storage media when connected to BD-LIVE. It can be also used for firmware upgrade. LAN It can be also used for connection to BD-LIVE or firmware upgrade.
remote control Tour of the Remote Control Installing batteries in the Remote Control 2. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Assuming typical TV usage, the batteries last for about one year. OPEN/CLOSE Buttons To open and close the disc tray. POWER Button OPEN/CLOSE TV POWER Button TV INPUT SEL. Button After setup, allows you to set the input source on your TV.
remote control Setting the Remote Control You can control certain functions of your TV with this remote control. Control function buttons include : TV POWER, TV CH ,/., TV VOL +/–, TV MUTE, TV INPUT SEL. button. To determine whether your television is compatible, follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3.
Controllable TV Codes Brand SAMSUNG Code TV POWER+01, +02, +03, +04, +05, +06, +07, +08, +09 AIWA TV POWER+82 ANAM TV POWER+10, +11, +12, +13, +14, +15, +16, +17, +18 TV POWER+57 BLAUPUNKT TV POWER+71 BRANDT TV POWER+73 BRIONVEGA TV POWER+57 CGE TV POWER+52 CONTINENTAL EDISON TV POWER+75 DAEWOO TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34 EMERSON TV POWER+64 FERGUSON TV POWER+73 FINLUX TV POWER+06, +49, +57 FORMENTI TV POWER+57 FUJITSU TV POWER+84
connections This section involves various methods of connecting the Blu-ray Disc Player to other external components such as a TV. Connecting to a TV with an HDMI Cable (BEST QUALITY) 1. Using an HDMI-HDMI cable (not included) connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to the HDMI IN terminal of your TV. 2. Press the input selector on your TV remote control until the HDMI signal from the Blu-ray Disc Player appears on your TV screen.
HDMI Auto Detection Function The player's video output will automatically change to HDMI output resolution when connecting an HDMI cable while power is on (see page 41). M` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user's manual of your TV. ` If an HDMI cable is connected from the player to a TV, the Blu-ray Disc Player’s output is set to HDMI output ` If Component and HDMI are both connected, HDMI mode is automatically selected.
connections Connecting to a TV with DVI Cable (BEST QUALITY) 1. Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to the DVI IN terminal of your TV. 2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your TV. Turn on the Blu-ray Disc Player and TV. 3.
Connecting to a TV (Component) (BETTER QUALITY) - Connecting to your TV using Component video cables. - You will enjoy high quality images with accurate color reproduction. Component video separates the picture element into black and white(Y), blue(Pb), red(Pr) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1.
connections Connecting to a TV (Video) (GOOD QUALITY) 1. Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV. 2. Turn on the Blu-ray Disc Player and TV. 3. Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on the TV screen.
Connecting to an Audio System (2 Channel Amplifier) 1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc Player to the AUDIO (red and white) IN terminals of your Amplifier. 3. Turn on the Blu-ray Disc Player, TV and Amplifier. 4. Press the input select button of the Amplifier to select the external input in order to hear sound from the Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
connections Connecting to an Audio System (7.1 Channel Amplifier) 1. Using the audio cables, connect the 7.1 ANALOG AUDIO OUT (Front R, Front L, CENTER, SUBWOOFER, Surround L, Surround R, SURR.BACK L , SURR.BACK R) terminals on the rear of the Blu-ray Disc player to the 7.1 Channel ANALOG AUDIO IN (Front R, Front L, CENTER, SUBWOOFER, Surround L, Surround R, SURR.BACK L , SURR.BACK R) terminals of your Amplifier. 2.
Connecting to an Audio System (Dolby Digital, DTS Amplifier) 1. U sing the optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier. 3. Turn on the Blu-ray Disc Player, TV, and Amplifier. 4. Press the input select button of the Amplifier to select the external input in order to hear sound from the Blu-ray Disc Player.
connections Connecting to an Audio System (HDMI supported Amplifier) 1. Using the HDMI-HDMI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player to the HDMI IN terminal of your Amplifier. 2. Using the HDMI-HDMI cable, connect the HDMI OUT terminal of the Amplifier to the HDMI IN terminal of your TV. 3. Turn on the Blu-ray Disc Player, TV, and Amplifier. 4.
Connecting to THE NETWORK You can use a LAN adaptor to connect to network service or upgrade the current firmware. 1 A To LAN port Connecting using a router (e.g. DSL) Broadband modem (with integrated router) Router Broadband modem Or Broadband service M` To LAN port To LAN port Broadband service Internet access to Samsung’s update server may not be allowed, depending on the router you use or the ISP’s policy. For more information, contact your ISP (Internet Service Provider).
basic functions of your Blu-ray Disc Player This section introduces basic playback functions and playback by disc type. Before Playing ~ Turn on your TV and set it to the correct Video Input (the input the Blu-ray Disc Player is connected to). ~ If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the POWER button, this screen comes up: If you want to select a language, press a NUMBER button.
On-Screen Menu Navigation Video System Setup System Information Music Netflix Time Zone Language Setup Subtitle Pandora Disc Menu Disclaimer Menu Audio Setup Clock Set Power On/Off sound Persistent Storage Management System Update Digital Output Display Setup TV Aspect Movie Frame (24 Fs) Resolution PCM Down Sampling Dynamic Compression Speaker Setup Screen Message Front Display Anynet+ (HDMI-CEC) HDMI Setup HDMI Format Network Setup TCP/IP Proxy Sharpness DVD Noise Reduction NTP Server M
basic functions of your Blu-ray Disc Player Setting the Power On / Off Melody sound When you turn the player on or off, a melody sound is produced. 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button. . Press the ▲▼ buttons to select System Setup, then press the ENTER or ▶ button. . Press the ▲▼ buttons to select Power On/Off sound, then press the ENTER or ▶ button. .
Slow Motion Play/Step Motion Play During playback, press the SLOW button on the remote control. ~ If you press the SLOW button, the playback speed is reduced to *1/8 * 1/4 * 1/2 ~ To return to normal speed playback, press the PLAY ( ) button. M` This ( ) icon indicates an invalid button press. ` No sound is heard during slow mode. ` Slow motion operates only in the forward direction. hgfZCV Step Motion Play In pause mode, press the PAUSE ( ) button.
system setup For your convenience, you can set this player’s features for the best use in your home environment. Setting the Clock Choose your time zone 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button. System Information Disclaimer Setup System Setup Time Zone Language Setup Clock Set . Press the ▲▼ buttons to select System Setup, then press the ENTER or ▶ button.
language setup Setting up the Language Options Once you set the audio, subtitle, disc menu and player menu language options, they will be applied automatically every time you watch a movie. If you want to choose a different audio and subtitle language while playing a disc, you can also use the disc menu to make the selection. 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button.
audio setup Setting up the Audio Options Allows you to set up the Audio device and sound status depending on the audio system being used with the player. System Setup No Disc 1. With the unit in Stop mode, press the MENU button. Disclaimer Language Setup Setup Audio Setup Display Setup . Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button. HDMI Setup Network Setup Parental Setup . Press the ▲▼ buttons to select Audio Setup, then press the ENTER or ▶ button. .
M` If you have selected a LPCM soundtrack on a disc, the output will automatically be set to PCM. ` Be sure to select the correct Digital Output or you will hear no sound or a loud noise. ` If the HDMI device (Receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio ` This Digital Output setup does not effect the analog (L/R) audio or HDMI audio output to your TV. It effects the optical and HDMI audio output when connected to a receiver.
audio setup Speaker Setup If you have connected this player to an Amp/Receiver or Home theater via the 7.1 channel Analog outputs you need to set the Speaker Options for the best sound. To setup, follow steps 1 to 3 in "Setting up the Audio Options" on page 36. System Setup No Disc Disclaimer Language Setup Setup Audio Setup 4. Press the ▲▼ buttons to select Speaker Setup, then press the ENTER or ▶ button. Display Setup HDMI Setup Network Setup Parental Setup 5.
display setup Setting up the display Options This function allows you to setup the TV screen settings. This function depends on the disc or TV type. It may not work with some discs or TVs. 1. With the unit in Stop mode, press the MENU button. Language Setup No Disc Disclaimer Audio Setup Setup Display Setup ● display setup HDMI Setup . Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button. Network Setup Parental Setup .
display setup Movie Frame (24 Fs) Movies are usually filmed at 24 frames per second. Some Bluray discs have the capability of playing back at this frame rate. Setting the Movie Frame (24Fs) feature to ON allows you to adjust the Blu-ray Disc Player's HDMI output to 24 frames per second for improved picture quality.
❖ Resolution according to the output mode ~ Blu-ray Disc playback Component (HDMI&Comp. connected / Comp. connected only) Video 1080p, Movie Frame(24Fs) off 1080p@60F 1080i 480i 1080p/1080i, Movie Frame (24Fs) on 1080p@24F 480i / 1080i 480i 1080i, Movie Frame (24Fs) off 1080i 1080i 480i 720p 720p 720p 480i 480p 480p 480p 480i 480i 480p 480i 480i HDMI Component (HDMI&Comp. connected / Comp.
HDMI setup Setting up the HDMI setup options 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button. Audio Setup No Disc Disclaimer Display Setup Setup HDMI Setup Network Setup . Press the ▲▼ buttons to select HDMI Setup, then press the ENTER or ▶ button. HDMI setup menu will be displayed. Parental Setup . Press the ▲▼ buttons to select the desired display option (Anynet or Format), then press the ENTER or ▶ button.
M` ● HDMI setup TV Anynet+ Menu When you press the Anynet+ button on your Samsung TV's n BD Player remote control, the following On-Screen Display (OSD) will be View TV Select Device shown.
parental setup Setting up the Parental Lock The Parental Lock function works in conjunction with Blu-ray Disc/DVDs that have been assigned a rating which helps you control the types of Blu-ray Disc/DVDs that your family watches. There are up to 8 rating levels on a disc. hZ 1. With the unit in Stop mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button. HDMI Setup No Disc Disclaimer Network Setup Setup Parental Setup HDMI Setup .
Setting the Rating Level 1. Press the ▲▼ buttons to select Rating Level, then press the ENTER or ▶ button. HDMI Setup No Disc Disclaimer Network Setup Parental Lock : Off Setup Parental Setup Rating Level : 8 (Adults) 7 6 5 4 3 2 1 (Kids) . Press the ▲▼ buttons to select the rating level you want, then press the ENTER button. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play. A larger number indicates that the program is intended for adult use only.
network setup You can update your player via Samsung’s server. Follow the steps below to ensure the best connection to Samsung's server for your player. To obtain information on the proper settings, check the network settings on your computer or contact your Internet provider. TCP/IP Setting 1. With the unit in Stop mode/No Disc mode, press the MENU button. Display Setup . Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button.
M` When you select an item, use the number and ▲▼◀▶ buttons. ` If the automatic settings don’t work, contact your ISP. . If you don’t want to save your work, use the ▲▼◀▶ buttons to select Cancel, then press the ENTER button. M` The IP address used in this manual is for illustrative purposes only. You must refer to the your network settings for the actual IP address.
network setup Mac Address Displays the MAC address of the player. A MAC address(Media Access Control address) is a unique identifier attached to most network adapters. It is a address that acts like a name for a particular network adapter. It cannot be changed. 1. With the unit in Stop mode/No Disc mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button.
persistent storage management Persistent Storage (Internal Flash Memory : Approx.1G Byte) is built-in memory on the player for storing Blu-ray Disc content. Persistent Storage (Internal Flash Memory : Approx.1G Byte) is where additional content such as trailers and other special features downloaded from Blu-ray discs is stored on the player. You can manage user data stored in persistent storage. 1. With the unit in Stop mode, press the MENU button. Clock Set Power On/Off sound : On Disclaimer .
system upgrade Samsung may offer upgrades to your Blu-ray Disc Player's firmware in the future. To upgrade this firmware you must : 1. Go to samsung.com and refer to the ‘SUPPORT’ page to download the latest firmware. You can use a CD-R or a USB flash drive to perform the firmware upgrade. For more information, see “Upgrade Manual” at the website mentioned above. or 2. Connect this player's LAN terminal to the LAN terminal on your modem (see page 29) and follow the steps below. Firmware Upgrade 1.
. To perform the system upgrade, press the ◀▶ buttons to select Start and then press the ENTER button. Power On/Off sound : On Persistent Storage Management Disclaimer No Disc Setup System Setup System Update 1 2 3 4 System Update Language Setup data was found. The new update AudioCurrent Setup Version : XXXXX New Version : XXXXX Display Setup HDMI Start Setup Cancel Network Setup Parental Setup . The system update gets started.
system upgrade System Information When the firmware upgrade is done, check the firmware details by following the steps below. 1. With the unit in Stop mode/No Disc mode, press the MENU button. . Press the ▲▼ buttons to select Setup, then press the ENTER or ▶ button. Disclaimer No Disc System Setup Setup Language Setup Audio Setup . Press the ▲▼ buttons to select System Setup, then press the ENTER or ▶ button. Display Setup HDMI Setup Network Setup Parental Setup .
watching a movie Using the Display Function hgfZCV . Press the ▲▼ buttons to select the desired item. BD Info Title : 001/006 Chapter : 001/016 Playing Time : 00:04:17 Audio : 1/1 ENG 2CH Subtitle : 0/1 Off Angle : 01/01 � Change s Select . Press the ◀▶ buttons to make the desired setup change and then press the ENTER button.
watching a movie Using the Disc Menu & Popup/Title Menu hZ Using the Disc Menu 1. During playback, press the DISC MENU button on the remote control. PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS . Press the ▲▼◀▶ buttons to make the desired selection, then press the ▶ or ENTER button. ~ The Disc menu setup items may vary from disc to disc. % 3 M` 4 5 6 7 8 9 10 11 12 13 14 15 Depending on the disc, the Disc Menu may not be available. Z Using the Title Menu 1.
h Using the Popup Menu 1. During playback, press the POPUP MENU button on the remote control. MAIN MENU AUDIO SET UP % 3 M` SCENE SELECTIONS 4 5 6 7 8 9 10 11 12 13 14 15 Depending on the disc, the Popup Menu may not be available. Repeat Play Repeat the current chapter or title. Repeat playback hgfZCV 1. During playback, press the REPEAT button on the remote control. Repeat screen appears. Repeat Off . Press the ▲▼ buttons to select Chapter or Title.
watching a movie hgfZ Selecting the Audio Language You can select a desired audio language quickly and easily with the AUDIO button. Using the AUDIO button 1. Press the AUDIO button during playback. The Audio changes when the button is pressed repeatedly. ~ The audio languages are represented by abbreviations. Audio 1/4 ENG Dolby Digital Multi CH . To remove the AUDIO icon, press the CANCEL or RETURN button. Using the INFO button 1. During playback, press the INFO button on the remote control. 2.
Selecting the Subtitle Language You can select a desired subtitle quickly and easily with the SUBTITLE button. 1. Press the SUBTITLE button. The subtitle changes when the button is pressed repeatedly. The subtitle languages are represented by abbreviations. Subtitle 1/ 7ENG . To remove the SUBTITLE icon, press the CANCEL or RETURN button. Using the INFO button 1. During playback, press the INFO button on the remote control. 2. Press the ▲▼ buttons to select Subtitle. 3.
watching a movie BONUSVIEW Settings The Bonusview feature allows you to view additional content (such as commentaries) in a small screen window while the movie is playing. If the current Blu-ray Disc features the BONUSVIEW function, you can use the BONUSVIEW button to turn BONUSVIEW On or Off. h Using the BONUSVIEW button 1. If the current title of a Blu-ray Disc has the BONUSVIEW feature, you will see the BONUSVIEW icon in the BONUSVIEW section on the play screen. BONUSVIEW .
Using the Bookmark Function This features lets you bookmark sections of a Blu-ray Disc/DVD, so you can quickly find them at a later time. 1. During playback, press the MARKER button on the remote control. The Bookmark screen appears. Marker BD 00:12:13 / 01:53:26 + . Press the ENTER button when the desired scene appears. The selected scene will be stored. Add Add . To bookmark another section, press the ◀▶ buttons to move to the next position. .
watching a movie Playing back a bookmark 1. During playback, press the MARKER button on the remote control. Marker BD 00:12:21 / 01:53:26 + T:1 00:12:17 T:1 00:12:27 a Delete Add Add { Move Add Add s Play Add Add e Exit . Press the ◀▶ buttons to select a bookmarked scene. . Press the ENTER or PLAY( ) button to start playing from the selected scene. Clearing a bookmark 1. During playback, press the MARKER button on the remote control.
Using the Instant Streaming feature provided by Netflix This Blu-ray Disc Player supports the Netflix streaming service which enables you to enjoy various movies via network connection. ● watching a movie 1. With the unit in Stop mode/No Disc mode, press the MENU button. . Press the ▲▼ buttons to select Netflix, then press the ENTER or ▶ button. . If you dont have an account, select "no-start my FREE trial" and subscribe to http://www.netflix.com/samsung from your computer.
watching a movie . Movies you added to the Instant Queue from the web are listed. Press the ENTER button of the remote control and select a movie to display the next screen. ~ To add the movie in Instant Queue list of this Blu-ray Disc Player, you can select "Add to Instant" button on "Watch Instantly" page of Netflix web site using your PC Movie 1 e Exit Actor or Actress name1 Actor or Actress name2 Name .
listening to music B Playing an Audio CD(CD-DA) 1. Insert an Audio CD(CD-DA) into the disc tray. The first track will be played automatically. TRACK 001 CD 01/12 00:01:29 / 00:04:06 + a Play Mode . Press the ▲▼ buttons to select the track you want to play, and then press the ENTER button.
listening to music Buttons on the Remote Control used for Audio CD (CD-DA) disc playback 1. PAUSE ( ) button: Pauses playback. 2. SKIP ( ) button: During playback, plays the next track. Moves to the next page in the Music List or the Playlist. 3. PLAY ( ) button: Plays the currently selected track. 4. ▲▼ buttons : Selects a track(song) in the Music List or Playlist. 5. COLOR buttons: RED(A), GREEN(B), YELLOW(C) ~ RED(A) button : Selects the Play Mode(Repeat) during playback.
Playlist You can create a playlist with up to 99 tracks. Video . To move to the Music List, press the STOP or RETURN button. The Music List screen is displayed. TRACK 006 Music CD Netflix Pandora Disclaimer Setup 00:03:20 TRACK 007 00:03:32 TRACK 008 00:04:36 TRACK 009 00:04:17 TRACK 010 00:04:11 TRACK 011 00:04:07 TRACK 012 00:04:46 TRACK 013 00:04:21 TRACK 014 b Playlist . Press the GREEN(B) button.
listening to music Using the Internet Radio feature provided by Pandora Pandora provides music personalized to your taste. 1. With the unit in Stop mode/No Disc mode, press the MENU button. PANDORA ® . Press the ▲▼ buttons to select Pandora, then press the ENTER or ▶ button. Pandora’s initial screen appears. internet radio . To run Pandora, you need to input the activation code at page with your PC.
. Press the GREEN(B) button while the highlight is on the station list to delete the selected station. Pandora Station Title 1 Song Title 1 Station Title 2 Station Title 3 Station Title 4 ! Are you sure you want to delete this station? Abba Radio Delete Song Title 1 Cancel By : Musician On : Album a Create Station b Delete Station c QuickMix . You can edit your song list by using color buttons of the remote control while the highlight is on the song list.
troubleshooting Before requesting service, please check the following. PROBLEM SOLUTION No operation can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again. Disc does not play.
PROBLEM SOLUTION • P ress the ] button (in front panel) for more than 5 seconds with no disc inside. All settings including the password will revert to the factory settings. Don't use this unless absolutely necessary. • When the factory default settings are restored, all the user data stored in the persistent storage will be deleted. If you experience other problems.
appendix Specifications General Power Requirements AC 120V, 60Hz Power Consumption 36 W Weight 6.8 Ibs Dimensions 16.9(W) × 10.6(D) × 2.3(H) inches Operating Temperature Range +41°F to +95°F Operating Humidity Range 10 % to 75 % BD (Blu-ray Disc) Reading Speed : 4.917m/sec DVD (Digital Versatile Disc) Disc CD : 5 inches (COMPACT DISC) CD : 3 1/2 inches (COMPACT DISC) Composite Video Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Compliance and Compatibility Notice ~ Because AACS (Advanced Access Content System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
Network Service All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (7267864) www.samsung.com Samsung Electronics America, Inc.
