BLI03 Thankyou for buyinga SamsungCamera, Ths manualwill gukJeyou through using the camea indud ng capturing images, downbading imagesand usingthe application software, Pleaseread this manual carefully before usng your new camera,, English
instructions Getting to Know your camera Use this camera in the following order. Thank you for buying a Samsung Digital Camera. To use this camera with a PC, install the application software first. After this has been done, the the camera can be : and can be edited ,r. If the _et the on. • Prior to using this camera, please read the user manual thoroughly. • If you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc.
Danger Warning DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. • Do not attempt to modify this camera in any way.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Contents READY ® Leaking, overheating, or damaged battery could result in fire or injury. - Use battery with the correct specification for the camera. - Do not short circuit, heat or dispose of battery in fire. - Do not insert the battery with the polarities reversed. • Remove the battery when not #:l_Rning to use the camera for a long period of time.
Contents 021 Pausing while recording a movie clip 037 (Successive 038 ISO Recording) Drive mode 022 Things to Watch Out for When Taking Pictures 038 White balance 023 Using the camera buttons to set the camera 039 Exposure compensation 023 POWER button 023 SHUTTER button 023 ZOOM WIT button 025 Face Detection(FD) 026 Function Description / Info / Up button 040 How to use the menu 027 Macro / Down button 041 Auto Focus type 028 Focus lock 041 Voice Memo 029 Flash / Left b
Contents 047 Setting up the Date / Time / Date type 057 Play & Pause / Down button 047 Start up image 058 Left / Right / Menu / OK button 047 Display Bright 058 Printer button 048 Quick view 058 Delete button 048 Display SAVE 059 E (Effect) button : Resize 060 E (Effect) button : Rotating an image 048 Settings 048 Formatting a memory 060 049 Initialisation 061 E (Effect) button : Colour 049 File name 050 Imprinting the recording date 063 Starting the Multi Slide Show 050
Contents SOFTWARE 072 Important notes 074 Warning indicator 075 Before contacting a service centre 077 Specifications 080 Software Notes 080 System Requirements 081 About the software 082 Setting up the application software 084 Starting PC mode 087 Removing the removable disk 088 Samsung Master 091 Setting up the USB Driver for MAC 091 Using the USB Driver for MAC 092 FAQ
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.
identification of features Front & Top Power button Mode dial Speaker Self-timer lamp AF sensor Flash Lens/Lens _-Micrc USB/AV terminal cover connection
identification of features Back Camera status tamp I (Digitalzoom) W button(Thumbnail) button LCD monitor *-- Fn / Delete button Strap eyelet Face Detection(FD) button 5 function button Ptay mode / Printer button
identification of features Bottom 5 Function button Memory card slot Battery chamber Function Description / information / Up button / OK button Self-timer / Flash / Left button Right button Battery chamber cover Macro / Down button / Memory card cover Ptay& Pause button Tnpod socket _Toopenthe above.
identification of features Mode icon Seaf-timerlame _tai Refer to page 17 for more information about the camera mode setting. - For the first 7 seconds, the lamp blinks at 1 second _ Blinking intervals. - For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals. .o.2S Blinking 0.25-second For the 2 seconds, the lamp blinks quickly at intervals. _1_ Blinking A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a Power Source We recommend batteries for a digital camera (Within a year from the date of manufacture). The batteries are listed below. - Non rechargeable batteries : 2 X AAAIkatine (High Capacity) - Rechargeable batteries (Optional) : SNB-2512 (Ni-MH) [] SNB-2512 rechargeabte battery Specification SNB-2512 Ni-MH 2500mAh 1.2Vx2 Approximately 300 Minutes (Use for SBC-N2) Included battery may vary depending on sales region, 12 ]Important information about battery usage.
Connecting to a Power Source inserting the rnernory card [] Insert the battery as shown [] insert the memory card as shown. - If the camera does not turn on - Turn off the camera's power before inserting the memory card. after you have inserted battery, please check whether the battery (+ / -). - Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor).
instructions on how to use the rnernorv card • Be sure to format the memory card (see p.48) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. • Turn off the camera power whenever the memory card is being inserted or removed. • Repeated use of the memory card will eventually reduce the memory card's performance. Should this be the case, you witl need to purchase a new memory card.
instructions on how to use the memory card The camera can use SD/SDHC (Multi Media Cards). Memory Cards and MMC When using a 1GB SD memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
LCD monitor indicator [] The LCD monitor displays information about the shooting functions and selections. iiiiiiiiiiiii!!!!!!!!ii_i_!_!_i_iii_!_!!_!!_!!_!!_!!_!!_!!_!!_!!_!!_!!_ ¸ Memory card icon / Internal memoryicon E_ Battery image Size ,[Z[] _ _ _ _ _ VoiceMemo/ Without Sound 16 I ! m(X5.0 _ /_ p.23 p.42/43 Number of available shots remaining 3 p.15 Remaining time 0O:00:0O p.15 p.36 [] p.37 _ _ p.37 _ p.36 _m°_m° _s° _s° mo _:_s° AW8-_.'- _ _(_ _ _ _m_ p.38 p.
Starting the recording mode How to use the Auto mode _(_ Howto use the Pro ram mode P Select this mode for quick and easy picture taking with minimal user interaction. Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Insert the batteries (p.13). insert the batteries taking note of the polarity (+ / -). 2. Insert the memory card (p.13).
Starting the recording mode How to use the Manual mode How to use the DiS mode You can manually configure all functions aperture value and shutter speed. Digital Image Stabilisation (DIS) mode. This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions. 1. Select the MANUAL mode by rotating the mode dial. 2. Press the Fn button and menu for the shutter speed and aperture value will display.
Starting the recording mode Usin the Photo Hel uide mode Helps the user learn the correct picture taking method and includes solutions for potential __'_'_'_%1_ _<,, .,.__-_ problems that may occur. This also enables the _'_ user to practice the best way to take the pictures.
Starting the recording mode How to use the Portrait mode ]The scene modes are listed below. Please select this mode for quick and easy portraits. [Nightscene] (_ ) : Use this for shooting still images at night or in other dark conditions. 1. Select Portrait mode using mode dial. 2. Press the shutter button to capture an image. [Children] (_ ) : To take a picture of fast moving objects, for example, children. ) : To take pictures of distant scenery.
Starting the recording mode How to use the Movie A movie clip can be recorded for as long as the available recording time of the memory capacity allows. 1. Select the Movie clip mode by rotating the Mode dial. ( The Movie clip mode icon and available recording time will display on the LCD monitor.). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the shutter button once and movie clips are recorded for as long as the available recording time allows.
Things to Watch Out for When Taking Pictures • Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [Lightly press the shutter button] [Press the shutter button] • The available memory capacity may vary depending on shooting conditions and camera settings.
Using the camera buttons to set the camera ZOOM WIT button The recording mode function can be set up by using the camera buttons. If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. POWER button Used for turning the camera's power on / off. If there is no operation during the specified time, the camera's power wilt be turned off automatically to save battery life. Refer to page 50 for more information about the auto power off function.
ZOOM WIT button [] WIDE Zoom Optical zoom WIDE wT iiO.. : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear furthercontinuously away. Pressing the the ZOOM W button will set camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera. [TELE zoom] [Optical zoom 2X] Digital zoom WIDE Opticalzoom [ q i f I! x 5.0 Digitalzoom [Digital zoom 5.
Face Detection F_F_button [] Face Detection(FD) This mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy face picture. ÷ Setectable modes: Auto, Program, Manual, DIS, Photo Help Guide, Portrait, Children, Beach & Snow 1. Press the FD(Face Detection) button ( _ ) in the selectable modes. The FD icon wilt be displayed on the screen left side. o o • • • • • This function can detect up to 9 persons.
Face Detection_ button [] Self Portrait When taking pictures of yourself, the area of your face is automatically detected so that you can take self pictures more easily and quickly. FunctionDescription/ Info (IDI) / Up button While the menu is showing, the Up button operates as a direction button. If the menu screen does not appear, information or function descriptions for the current shooting mode can be accessed through the LCD monitor by pressing the Function description/Information (IE]I) button.
Macro( ) / Downbutton While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the MACRO (_,_) / DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro button untit the desired macro mode indicator appears on the LCD monitor.
Macro ( ) / Down button Focus lock [] Available focusing method, by recording mode ( o : Selectabie, (_ : Infinity focus range) To focus on a subject not positioned in the centre of the picture, use the focus lock function. [] Using the Focus Lock o 1. Ensure the subject is in the centre of the autofocus frame. o o 2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject.
Flash ( _ ) / Left button When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. o When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( _ ) button. o o [Selecting the Auto flash] [] Selecting the flash mode 1. Press the exception 2. Press the displayed Mode button to select a RECORDING mode with the of the Movie clip mode or the DIS mode.(p.
Flash ( _ ) / Left button [] Flash mode indicator _A Auto flash [] Available flash mode, by recording mode If the subject or background is dark, the camera flash will operate automatically. o o o o ( o : Setectabte) o o o o @ Auto & Red eye reduction If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function.
Self-timer ( _ ) / Right button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( _ ) button. This function is used when the photographer would also like to be in the image. [] Selecting the self-timer 1. Rotate the Mode dis! to select a desired RECORDING mode. 2.
Self-timer ( _ ) / Right button MENU / OK button [] Motion Timer [] MENU button Pressing the Shuter button after setting the Motion Timer Blink (1 second interval) Detecting the subject's movement Blink (0.25 second interval) No movement is detected Turn on and the image is taken after 2 seconds - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display.
button It is possible to add speciat effects to your button • Colour images by using this button. By using the camera's digital processor, it is possible to add special effects to your images [] Press the E button in an available - Still image mode : You can select the colour and image adjust menu. In the Auto, Portrait mode, you can select the [COLOR] menu only. recording mode. - Movie clip mode : You can select the cotour menu. [] Available Effects, by recording mode ( o : Selectable) 1.
button button : Contrast [] Custom cotour : You can change the R (Red), G (Green) and B (Blue) values of the image. - Up/Down button : Selects R, G, B - Left/Right button : Changes the values [] You can change the contrast of the image. 1. Select ((_) by pressing the Up/Down button and a bar for selecting the contrast will be displayed. 2. Change the contrast by pressing the Left/Right button. 3. Press the Shutter button to take an image.
Fn button You can use the Fn button to set the following menus. ( o : Selectable How to use the Fn menu 1. Press the Fn button in an available mode. o o o o o o o p.36 o o o o o o o p.36 o o o o p.37 o o o o o o o o "o p.37 o 2. Select a desired menu by pressing the Up / Down button. And then a sub menu wilt be displayed at the bottom right of the LCD monitor. Up/Down button p38 o o o p.38 o o o p.39 3.
Fn button Size / Frame rate You can select the image size appropriate for your application. (Unit: pixel) You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. •"" .........
Fn button Drive mode If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. You can select continuous shot, and AEB (Auto Exposure Bracketing). [Single] (r_) [Multi] (_]) : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use.
Fn button ISO White balance You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. The white balance control allows you to adjust the cotours to appear more natural. [Auto] : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness.
Fn button White balance Exposure compensation [] Using the Custom White Balance This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the Fn button. White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1.
Usingthe LCDmonitor to adjustthecamera settings Recording ( You can use the rnenu on the LCD monitor to set up recording functions. [] The items indicated by are default settings. How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. 2. Use the LEFT and RIGHT buttons to navigate through the menus. Foacs Area Multi AF Voice Memo On [][]DQD p.41 __ p.41 []DDDB Voice Record (R£g) QD_M_ Voice Mute D On p.42 p.43 3.
Recorcling( Auto Focust_tpe Voice Memo You can select your preferred Focus Area according to the shooting conditions. You can add your voice-over to a stored stilt image. (Max. 10 sec.) [Center AF] : The rectangular area in the center of the LCD monitor will be focused [Multi AF] : This camera selects all of available AF point from the 9 AF points. - If the voice memo indicator is displayed on the LCD monitor, the setting is completed. - Press the shutter button and take a picture.
Recording_ [] Pausing while recording a voice Voice Recordincz Using this function, you can record your favourite voice clips into a voice recording file without having to create multiple voice recording files. A voice can be recorded for as tong as the available recording time (Max. 10 hour) allows. 1. Press the Pause button ( _ ) to [Voice recording mode] pause recording. 2. Press the Pause button ( _ ) again to resume the recording. 3. If you wish to stop recording, press the shutter button again.
Recording_ Recording the movie clip without voice You can record the movie without voice. Select [On] of [Voice Mute] menu in the Movie clip mode. ((_)) icon will appear on the LCD monitor. Press the Shutter button and a movie will record for as long as the memory capacity allows without voice. SCENE mode Use the menu to easily configure optimal settings for a variety of shooting situations. Press the MENU button and select a desired sub menu. Refer to page 20 for more information.
Sound sound(,!,))) menu In this mode, you can set up sound settings. You can use the setup Volume menu in all camera modes, except Voice Recording mode. [] The items indicated by You can select a volume of start up sound, shutter sound, beep sound and AF sound. are default settings. Off - [Volume] sub menu : [Off], [Low], [Medium], [High] Low __ p.
Sound Sound If you set sound to ON, a beep will sound when buttons are pressed, letting you know the camera operation status. Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. [] The items indicated by - [Beep Sound] sub menu : [Off], [Sound 1, 2, 3] are default settings.
Setup menu Dis_ Honolulu, Hawaii Alaska LA,SanFranciscoDenver, Phoenix Date & Time World Time Chicago, Dallas NewYork, Miami p.47 Caracas, LaPaz Newfoundland Buenos Aires Mid-Atlantic Cape Verde Logo (Display) Start Image p.47 User Image Dark Display Bright Normal p.47 Bright Off Quick View 1 sec 3 see p.48 Display SAVE On p.48 Format Yes p.48 Reset Yes p.49 Fde i : Reset p.49 Date Imprint Off (Settings) p.50 Date&Time Power Off 1 min 5rain p.50 PAL p.
the Date / Time / Date You can change the date and time that wilt be displayed on the captured images and set up the date type. Setting [World Time] enables you to display the local date and time on the LCD monitor when travelling overseas. - Date type : [yyyy/mm/dd], [mm/dd/yyyy], [dd/mm/yyyy], [Off] Start up You can select the image that is first displayed on the LCD monitor whenever the camera is turned on.
Display ( _ ) Quick view Formattin_ If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory.
Initialisation File name All camera menu and function settings will be restored to their default values. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT wilt not be changed. This function allows the user to select the file naming format. - Sub menus [No] : Settings will not be restored to their defaults. [Yes] : Awindow to confirm the selection will be displayed. Select the [Yes] menu and all settings will be restored to their defaults.
the recordinctdate There is an option to include DATE /TIME on still images. [Date] [Date&Time] The DATE & TIME will not be imprinted on the image file. Onty the DATE will be imprinted on the image file. The DATE & TIME will be imprinted on the image file. The Date & Time are imprinted at the bottom right side of the still image. The imprint function is applied only to still images. Depending on the manufacturer and print mode, the date printed on an image may not be printed correctly.
Video out type - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. - PAL The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. [] Connecting to an external monitor When the camera is connected to an external monitor, the image and menus on the LCD monitor will be visible on the external monitor and the LCD monitor of the camera.
Auto Focus lamp Selectin a batter t e You can turn on and off the Auto Focus tamp. If a battery type is selected, the camera will be optimized according to the selected battery type. - Sub menus [Off] : The AF lamp will not light up in tow light conditions. [On] : The AF lamp wilt light up in low light conditions.
Starting..!_l_a,y mode Turn the camera on and select Play mode by pressing the play mode button ( r_ ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. _ci back a still imaqe 1. Select the PLAY mode by pressing the play mode button ( _ ). Pla_zi_qback a movie cli_ 1.
Starting..play mode Moviedip_ture _q function You can capture still images from the movie clip. [] How to capture the movie clip 1. Press the Play / Pause button( _ ) while playing the movie clip. Then press the E button. 2. The paused movie clip is saved in a new file name. [Paused] The captured movie clip file is the same size as the original movie clip (640x480, 320x240). When you press the E button at the beginning of the movie clip, the first frame of the movie clip will be saved as a still image.
LCD monitor indicator Using the camera buttonsto set the camera The LCD monitor displays shooting information about the displayed image. In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail ( X ) / Enlargement ( o, ) button You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. [] Thumbnail display 1. While an image is displayed on full screen, press the thumbnail button .........................
Thumbnail_ button [] The maximum enlargement rate in proportion to the image size [] Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. T W 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the top left of the LCD monitor.
_p button Play & Pause _ When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info button will display image information on the LCD monitor. Info (ll31) button Info (ll31) button X / Down button In Play mode, the ptay& pause/down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor.
Left / Right / Menu / OK button Delete ( _'_} button LEFT / RIGHT / MENU / OK buttons activate the following. This deletes images stored on the memory card. -LEFT bu_on - RIGHT button - MENU button - OK button Printer _ : While the menu is showing, the LEFT button operates as a direction button. While the menu is not showing, press the LEFT button to select the previous image. : While the menu is showing, the RIGHT button operates as a direction button.
button • Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. - A large sized image can be resized to a smaller sized image, but not vice versa. - Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files can't be resized. - You can change the resolution of only those files compressed the JPEG 4:2:2 format. - The resized image wilt have a new file name. The [Start 1. Press the play mode button and press the E button. 2.
E (Effect) button • Rotating an image You can rotate the stored images by various degrees. 1. Press the play mode button and press the E button. 2. Press the LEFT / RIGHT button and button : Colour It is possible to add colour effects to your images by using this button. 1. Press the ptay mode button and press the E button. 2. Select ( _ ) menu tab by pressing the Left / Right button. select the [ROTATE] ( _ ) menu tab. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button.
button • Colour [] Custom colour You can change the R (Red), G (Green) and B (Blue) values of the image. Settin_ backfunctionusingtheLCDmonitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. Show Start Play/ RepeatPlay p.
Setting up the _plalay back function usin9 the LCD monitor This menu is available white the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Auto Plain iiiiiiii Type One Pic images All Pics FastPhoto p.71 Auto Auto Draft Quality PostCard Card Date Oft 2L On Letter Auto File Name A3 Auto Full Off On p.71 No Reset Yes 1 2 Layout 4 8 9 16 Index 62 p.71 Auto L A4 n Normal Fine 4X6 Size Photo .
Starting the Multi Slide Show Images can be displayed continuously at pre-set intervals. SeJectincL/maec£es You can view the Multi Slide Show by connecting the camera to an external monitor. You can select image to view 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [MULTI SLIDE SHOW] menu tab. Start the Multi Slide Show The Multi Slide Show can start only in the [Show Start] menu. 1.
Starting the Multi Slide Show Confiqure Multi Slide show effects Settincu_alav interval Unique screen effects can be used for the Multi Slide Show. Set the Multi Slide Show ptay interval. 1. Select the [Effect] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down button to select the type of effect. [Off] : No effect. [Basic] : Fade In/Out effect is added and the Images are displayed at set interval. [Classic] : You can add noise to the image to give a classic feel.
Starting the Multi Slide Show ( _ ) Pla_ _qround Voice memo Music Set the Multi Slide Show music. You can add your voice to a stored still image. 1. Select the [Music] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired Music. 3. Press the OK button to save the configuration. [Voice memo menu] [Ready for recording] [Voice is recording] - Press the shutter button to take a picture. The images are saved on the memory.
Pla DeletincLimAec!es Protectin_eaes This deletes images stored on the memory. This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). 1. Press the Up / Down button and select the [Delete] menu tab. And then press the Right button. 2. Select a desiredsub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window for an image to delete is displayed.
Plabackvb kJ_Qj DPOF [] DPOF(Digital Print Order Format) allows you to embed printing information on your memory card's MlSC folder. Select the pictures to be printed and how many prints to make. [] The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. [] Standard This function allows you to embed printing quantity information on a stored image. 1.
l=,la [] Index [] Print size Images (except for movie dips and voice file) are printed as index type. You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Select the [Index] menu and press the Right button again.
Plabackvb k Qj Copy ToCard o This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [Copy To Card] menu tab by pressing the Up / Down button. And then press the Right button. 2. Select a desired sub menu by pressing the UP/DOWN button and press the OK button. - [No] : Cancels "Copy to Card". - [Yes] :All images, movie clips and voice recording files saved in the internal memory are copied to the memory card after the [Processing!] message is displayed.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. [] Setting up the camera for connection to the printer 1. Connect the camera and printer with USB cable. 2. Select the [Printer] menu by pressing Up / Down button and press the OK button.
PictBridge • Picture Selection PictBridge • Print Setting You can select images you want to print. You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. [] Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge menu wilt display. 2. Use the Up / Down buttons to select the [Images] menu and press the Right button. 3. Use the Up / Down buttons to select a desired sub menu and press the OK button.
PictBridge • Reset important notes Initialises user-changed Be sure to observe the following precautions[ configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button. If [No] is selected : Settingswill not be reset. If [Yes] is selected : All print and image settings will be reset. • This unit contains precision electronic components.
important notes • Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.
Warning indicator There are several warnings that may appear on the LCD display. [ Card Error!] • Memory card error -e. Turn off the camera power and turn it on again -e. Insert the memory card again -+ Insert and format the memory card (p.48) [ Card Locked! ] oThe memory card is locked -+ SD/SDHC memory card : Slide the write protect switch to the top of the memory card [ Memory Full! ] • The memory card or internal memory is full. -e. Insert new memory card.
Before contacting a service centre Please check the following The camera doesn't switch on oThere is low battery capacity -e Insert fresh batteries. (p.13) • Battery is inserted incorrectly with the polarities reversed. -+ Insert the battery according to the polarity marks (+, -). The camera power ceases while in use eThe battery is exhausted --,'. Insert fresh batteries. oThe Camera is turned off automatically -e. Turn on the camera power again.
Before contactinq a service centre The flash does not fire oFlash off mode has been selected -e. Dis-engage flash off mode oThe camera mode can't use the flash -+ Refer to the FLASH instruction (p.
=Specifications Image Sensor - Type : 1/2.33" CCD Flash - Modes : Auto, Auto & Red-eye reduction, Fill-in - Effective Pixet : Approx. 10.2 Mega-pixet -Total Pixel : Approx. 10.3 Mega-pixel Lens - Focal Length : SAMSUNG Lens f = 6.3 ~ 18.9mm (35ram film equivalent : 35 ~ 105ram) - F No. : F3.0(W) ~ F5.6(T) - Digital Zoom : .Still Image mode :1.0X ~ 5.0X .Play mode: 1.0X ~ 11.4X (depends on image size) flash, Slow sync, Flash off - Range : Wide : 0.4m ~ 3.0m, Tele : 0.5m ~ 2.
Specifications - Movie Clip •With Audio or without Audio (user selectable, recording time : max 2 hours) .Size : 640x480, 320x240 .Frame rate : 30 fps, 15 fps .3X Optical Zoom and Mute in Zooming .
Specifications Dimensions (WxHxD) - 93.1 X 61.5 X 24mm Weight -Approx. Operating Temperature - 0 ~ 40°C Operating Humidity - 5 ~ 85% Software - Samsung Master, Adobe Reader (excluding protrusions) 120g (without batteries and card) •_ Specifications are subject to change without prior notice. •_Alt trademarks are the property of their respective owners.
Software Notes Please ensure that you read the instruction manual carefully before use. -Under no circumstances should all or part of either the software or the user manua! be reproduced. -Copyrights for software are licensed only for use with a camera. -In the unlikely event of a manufacturing fault, we wilt repair or exchange your camera. We cannot, however, be held responsible in any way for damage caused by inappropriate use.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. o ou should allow 5 ~ 10 seconds for running the automatic setup program according to the capability of your computer. If the frame does not appear, run the [Windows Explorer] and select [Installer.exe] in the CD-ROM Drive root directory. [] Samsung Master : This is the all-in-one multi media software solution.
Settin_lication software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. • You can visit the Samsung web-site through the internet. http://www.samsung.com 1. The auto run frame will display. Click the [Samsung Digital Camera Installer] menu in the Auto run frame. 82 2.
Settin_plication software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer wilt recognise the camera, ..... ........ ii il N If your OS is Windows XP/Vista, an image viewer program wilt open. '_ _ ............ t _ :',:,,,, _;,;;,, : :_ _:_, p_,_,22_ i'::)i.;: ..... _ ::::.
Settin_lication software Startinq PC mode If you connect the USB cable to a USB port on your PC and then • PDF documents user this manual are included in the CD-ROM suppliedofwith camera. Search the PDFSoftware files with Windows explorer. Before opening the PDF files, you must install the Adobe Reader included in the Software CD-ROM. • To install the Adobe Reader 6.0,1 correctly, Internet Explorer 5,6 or later has to be installed. Visit "www.microsofl.
Starting PC mode [] Connecting the camera to a PC [] Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk -e DCIM-e 100SSCAM].The image files wilt then be displayed.
Starting PC mode 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. - By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. o view e recommend that images you should copyfrom the the images to the PC them. Opening directly removable diskto may be subject to unexpected disconnection.
Removing the removable disk [] Windows 2000/XP/Vista 5. A [Safe to Remove Hardware] window (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. wi,, open. O,ick the button, 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 2.
Sarnsung Master You can download, view, edit and save your images and movies with this software. This software is only compatib(e with Windows. To start the program, click [Start --,'. Programs --,'.Samsung --,'. Samsung Master]. 1. Connect the camera to your PC. you want and images will be downloaded. 2. A window for downloading images will be displayed after connecting the camera to your PC. - To download the captured images, select the [Select All] button. - Select desired folder in the 3.
Samsung Master [] Image viewer : You can view the stored images. [] image edit : You can edit the still image. -_,..==K4_ _lF----® _r r:.......... - Image viewer functions are listed below. (_ Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. % Image selection window : You can select the desired images in this window. _,_Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
Sarnsung Master [] Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. - Movie clip edit functions are listed below. (_; Edit menu : You can select the following menus. [Add Media] : You can add other media elements to a movie. [Edit Clip] [Effects] [Set Text] [Narrate] [Produce] : You and : You : You : You : You can change the brightness, contrast, colour saturation. can insert an effect. can insert texts. can insert a narration.
Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.3. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. Usina the USB Driver for MAC 1. Double click a new icon on the desktop and the folder in the memory wilt be displayed. 2.
FAQ Please chock the following if the USB connection malfunctions. USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. .... There is an unexpected error during file transfer. Turn the camera power off and on again. Transfer the file again.
[]When theDirectX 9.0orlater isnotinstalled -+install theDirectX 9.0orlater 1)insert theCDprovided with thecamera 2)Run thewindows explorer and select the[CD-ROM drive:\ DirectX] folder and click theDXSETURexe file. The DirectX willbeinsta!led. Visit thefollowing site for downloading theDirectX.http://www.microsoft.com/directx []ifaPCconnected with thecamera stops responding while Windows isstarting. -+inthis case, disconnect thePC and thecamera and Windows willstart.
FCC notice m Declaration of Conformity Trade Name : SAMSUNG ELECTRONICS AMERICA, INC. Model No. : SAMSUNG BL103 ResponsibleParty : SAMSUNG ELECTRONICS AMERICA, INC. Address : 105 Challenger Road Ridgefield Park NJ Telephone No. : 1-800-SAMSUNG(726-7864) This device complies with Part 15 of the FCC Rules.
MEMO 95
MEMO 96
[nternet address _ht_p://www,samsung.