User guide

13
Note: Your phone has a built-in antenna. As with any other
radio-transmitting device, do not touch the antenna
as it affects call quality and can cause the phone to
operate at a higher power level than is necessary.
3. The phone begins searching for a signal. When a signal
is found, the date, day, and time appear in the display.
Your phone is now ready to place and receive calls.
• If the phone is outside of your carrier’s coverage or
roaming area you cannot place or receive calls. Try again
later when service becomes available.
Turning your phone off
• Press and hold for more than two seconds.
Note: Your phone will not power off if you press for
less than one second. This prevents you from
shutting off the phone accidentally.
Making and answering calls
Outgoing
1. With your phone on, enter the phone number you want to
call (up to 32 digits) using the keypad. The phone
numbers display from left to right.
2. Press to place the call.
Incoming
When you receive a call:
• If the caller can be identified, the phone displays the
caller’s number (or the caller’s name if it is pre-stored in
your Phone Book).