B W CCD CAMERA INSTRUCTION MANUAL BW-4302 SERIES [ SALES NETWORK ] ・SAMSUNG TECHWIN CO., LTD ・SAMSUNG OPTO-ELECTRONICS AMERICA INC. 40 SEAVIEW DIRVE, SECAUCUS N.J OPTICS & DIGITAL IMAGING DIV. 145-3, SANGDAEWON 1-DONG, JUNGWON-GU, 07094, U.S.A. SUNGNAM, KYUNGKI-DO, KOREA TEL : 209-902-0347 462-121 FAX : 201-902-9342 TEL : 82 -031-740 - 8137~41 FAX: 82 -031-740 - 8145 P/ NO. : 6806-0344-01A ・www.samsungcamerausa.com Printed in Korea ・www.samsungtechwin.com crecom 01.11 ・www.samsungcctv.co.
Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order that you can understand this manual thoroughly, we'll introduce our model description.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING- TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS CAMERA TO RAIN OR MOISTURE. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Features Automatic Backlight Compensation Electronic Iris The backlight compensation technology allows the camera to find the best picture conditions in any environment and automatically gives a necessary light level compensation, so that you can always obtain the clear picture, the finest detail and perfect light contrast. Electronic iris shutter is automatically controlled at the speed of 1/60~1/100,000sec (EIA models), 1/50~1/100,000sec (CCIR models).
Precautions Do not install the camera in extreme temperature conditions. Do use the camera under conditions where temperatures are within -10°C to 50°C. Especially be careful for ventilation under high temperature. Do not install or use the camera in an environment where the humidity is high. It can cause the image quality to be poor. Do not drop the camera or subject them to physical shocks. It can cause malfunctions to occur. Do not expose the camera to rain or spill beverage on it.
Getting to Know Your Camera Front Getting to Know Your Camera Bottom C -Mount Lens Adapter Glass Protecting Cap Tripod Mounting Hold Used to install the camera on an optional tripod. The tripod must be equipped with the screw specified as shown below Back Focus Lock Screw 1/4″-20 UNC (20 THREAD) L : 4.5mm ± 0.2 mm (ISO standard), or 0.197″(ASA standard) L CS-Mount Lens Adapter You can remove and install this bracket on the top of the camera.
Getting to Know Your Camera Getting to Know Your Camera Back Accessories IRIS Mode Selection Switch. Video Out Jack IRIS lens plug BLC Function select Switch Auto Iris Lens Connector LEVEL Adjustment V.R (Using DC Iris Lens Only!) SYNC Mode selection switch Notes:There is no Sync selection switch on the rear of DC power type. L-Wrench Power Input Terminal Notes: Each model has the different power source. V.PHASE Adjustment V.R Notes: There is no V.PHASE VR on the rear of DC power type.
Controls and Adjustments Controls and Adjustments Glass Protecting Cap Be sure to cap the lens mount when the lens is not mounted. Pull out the cap to remove. C-Mount Lens Adapter Used to mount a C-mount lens. Remove it to mount a CS-mount lens. Turn counterclockwise to remove. CS-Mount Lens Adapter Used to mount a CS-mount lens. C-mount lenses can be used when the C-mount adapter is attached, and CS-mount lenses can be used when it is removed.
Controls and Adjustments Monitor picture To make it brighter To make it darker Adjustment direction Turn clockwise Turn counterclockwise Notes : This function is activated when being in the ESC mode. BLC(Backlight Compensation) Function CENTER/FULL Switch This switch improves an image that is darkened because of backlighting. This Function be possible only when the camera have a manual lens. When the lighting source is in the rear of object, the object might be seen some darkness.
Connection Lens Lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts auto iris lens, both C- and CS-mount lens. Notes: If the lens is stained with fingerprint or something, the image quality might be poor. It is recommended to use a high quality lens to improve the image quality under low illumination. CONNECTION 3. Remove the cover from the connector pin supplied, and solder the lens cable to the connector pin as shown below. • Video type : No.
CONNECTION CONNECTION 5. Connect the lens plug to the auto iris connector on the rear of the camera. Installing CS-Mount lens 1. Remove the protecting cap and C-mount adapter. 6. Set the IRIS Mode selection switch to Video according to the type of the lens. C-Mount Lens Adapter. Glass Protecting Cap. 2. Attach the lens into the camera by turning clockwise. Installing C-Mount lens After removing the protecting cap, attach the lens into the camera by turning clockwise. C-Mount Lens Adapter.
CONNECTION CONNECTION Connecting to Power Connecting to Monitor Connect the VIDEO out jack to the monitor video in jack. Each model has the different power source and the operation characteristics. Make sure the power is supplied to the appropriate power terminals on the camera. Connect the power as referred on the following figures.
Specifications Troubleshooting If you have trouble operating your camera, refer to the following. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problem Nothing appears on the screen. Solution • Check that the power cord and line connection between the camera and monitor are made properly. • Check that the VIDEO/ESC selection switch on the rear of the camera set to a proper position according to the type of your lens.
MEMO DECLARATION OF CONFORMITY Application of Council Directive(s) Manufacturer's Name Manufacturer's Address European Representative Name European Representative Address Equipment Type/Environment Model Name Beginning Serial NO. Year of Manufacture Conformance to 89/336/EEC SAMSUNG TECHWIN CO., LTD SAMSUNG TECHWIN CO.
